Fab Willie stops by with a Mcculloch 1-60!! Will it run???

[@mrxlh]

Nothing is better than a good dog!!!!!

[@simpleman4224]

The tin-grin on your face is priceless! Cool saw!👍👍👍👍🇺🇸🇺🇸🇺🇸🇺🇸🙏🙏🙏🙏

[@jachthundinst957]

This is a nice Old saw. Best regards from Germany ✌🏻

[@jonathanhall136]

The Tinman and Fab Willie ride again ha ha, that old saw is a big ol' chunk of metal, look fwd to see it running and cutting again. Great vid.

[@jaymay306]

My buddy just came by and dropped off a Homelite C7 that he picked up for me when I won it for $25 on an online auction. Appears to be in pretty good shape. Just ordered a full tillotson carb kit for it.

[@tonicasaesmeralda8612]

Got all excited and everything to see that old saw run! :) Nice vid! :)

[@marcusrasmussen6143]

I have the same saw! Been tinkering a bit with it and got it to bark a couple times, it’s just not getting hot enough spark. Or consistent spark. But when it did fire, oooooh my I fell in love.

[@marcusrasmussen6143]

Oh and they were only made for 1 year, 1958 to 1959. And then discontinued.

[@johnrosier1686]

Great to see an appearance by Dav Willie, Bertha, and Ruby on your channel. That Mac sounds like it is almost there.

[@ScrewdriverTUNING]

Oooo yea that what I’m talking about. I had to locktite the screws and the brass plug between the jets to get that same HL to stop leaking. The O rings on the jets were in good shape on this 1-50. The HL repair kits come with a shorter brass fitting for the needle seat. Works great now.🦾⚡️💚🪓

[@trevorclark7995]

I have a 1-60 myself runs like a top came with a 36 inch bar not fast cutter but the gear reduction system on them eat thru any thing can’t wait to see ya get it goin tinman

[@newagelumberjack]

That was awesome! I can’t believe you got that old Mac going

[@DaveyBlue32]

That’s going to be a beast at 80cc! I absolutely love having my 250 be a 6.0 with the 6 speed stick... you have the gears for days... and having the ability to shift into low 4 and have a creeper gear as you low 1 is crazy great! Pulling trees and bushes out it’ll just sit and break traction at idle... 2500 at 5mph! I love this engine and transmission combination... I’ve got to get on my rust fast or it’s going to be too ugly for the road... a foot of my driver rear cab corner diapered this winter! I’m thinking that navel jelly painted on might work? I love Evaporust but I can’t dip the truck in it??? LMFFAO! 😂👍😂

[@terryclinard9031]

I love my old 1-42 !!

[@onestopfabshop3224]

Those old Mac's sound so friggin nice.

[@Syncop8rNZ]

I love the bolt-action choke! I there was a shadow from whoever was filming then I realized it was the dog.

[@bucketofguts]

Good stuff man!

[@ClintsHobbiesDIY]

On my heart just skipped a beat, No other brand of saw that I buy or is given to me gives me the feeling I get when a Mac starts. They are beyond tough.

[@ChippyOutdoors]

Good way to start the morning 👍

[@richp1146]

" we'll figure it out. We aren't landing a spacecraft here " laughed my ... off.

[@loganwhite6403]

Gotta love the turbo diesel got one myself hahaha nice job getting that old saw running an that bar cleaned up would be a nice piece haha

[@timothybyrom5560]

I've got a D-30 rip cord in the top, with a flat back carb.

[@retiredwelder]

Love Cummins!! 8 IN A V YOU SIT DOWN TO PEE. 6 IN A ROW YOUR READY TO TOW!!!!!!as always WORK SAFE 😎😎

[@timothybyrom5560]

You're getting into my world.

[@snowysnobdds7842]

Those hl tillotson is a good carb and easy to rebuild.

[@richardmiller4104]

Check out the carbs on the stihl bt360 post hole borer they run same looking carburter.

[@bobjohn297]

Just got one no bar an think missing parts were chain goes on...But gotter running pretty good..

[@mikahakkinen5651]

cool old saw

[@timothybyrom5560]

I was wrong about the years. I was thinking about a1-40 I think the 60 was 60-61 maybe 59. Again I think it to be an early model because the latter ones have the recoil on the left.

[@timothybyrom5560]

That one is early because the recoil is on the other side on the later ones.

[@timothybyrom5560]

I've been working on a couple of Homelite C series saws the last couple of days. Love Hate with those monsters.

[@24hobbes24]

Sweet looking saw tinman! Love the channel. I'm in alberta! I'm working my way thru the porting series!! Any chance you have seen any echo cs5500 saws kicking around?! I just picked one up and parts are scarce!!

[@jim-rk1yo]

i have a mac 250 that acting similar it ended up being the reed valve stuck open

[@shanesmith8700]

Tinman loves those saws have a 1-61 use it on bigger wood

[@ozdatman]

Throttle response on the old girl was pretty good. I need better neighbours. Nice ve-hicle Mr Willie. Subbed.

[@tinmanssaws]

That ol saw was snappy for sure.

[@timothybyrom5560]

Muc-Kluck- That's what I call them!

[@logman6656]

Cool never seen carb like that before

[@gpn854]

You can find a screen cover for the flywheel on eBay . I buy a lot of things for my McCullochs there .

[@timothybyrom5560]

Got the 51 and one of the 72's right. Got to put a coil in the other 72.

[@terryclinard9031]

got 1-42 , it's a beast , I love it.

[@MinusTheSparkPlugs]

Yeah those HL carb jets do have o-rings on em

[@mrxlh]

That recoil is almost like a shovelhead kicker......

[@Moose54656]

I have one of those saws. It's an hl63b.

[@edwinhsingmaster9135]

I was just given/traded a Mac 250 that looks very similar. I'm going out soon to see if it has the same carb.Tinman I love your presentations, but try to remember that there is no "e" on the end of OREGON. We're right here, we're not "gone". The way we pronounce our beautiful state>" ORYGUN!.

[@emojiman4560]

I've got a 1980 Jeep j20 (3/4) Pickup Truck with a built 360

[@michaelwhiteoldtimer7648]

NOTHING SOUNDS LIKE A OLD MAC

[@timothybyrom5560]

O-rings,and a washer.

[@austingoleman9431]

My 1-52 two intake gaskets are bad to what did you use to make them I tried cardboard but it leaked air

[@eroscaccaro9116]

Good day! I have a question and I would really appreciate if you could spend a couple of minutes to give me an answer based on your experience and knoledge, I own a 372XP (stock) and I would like to install a 24 inch bar with a full comp (no skip) chain saw chain, do you think such a set up is gonna be ok or should I fit a shorter bar? thank you in advance for your time and your suggestion

[@tinmanssaws]

Hi, that saw will pull a 24" full comp very very well. Lotsa guys run 32" on tbose stock.

[@eroscaccaro9116]

Thank you very much! I wish you a good day!

[@Moose54656]

I have a carb kit I'd be happy to send you.

[@Thetreefella]

💛🖤💛🖤💛🖤💛🖤

[@MrBucidart]

Question: In 1959/1960 the mix was 20:1 leaded gas. What mix will you be running in it? I have my Dad's 1-52.

[@tinmanssaws]

I run 45:1 in everything.no issues

[@jeffreyrubish347]

It'll be cutting wood soon 👍

[@jackfrosty79ify]

Carb kit

[@joshuap7501]

The old gas smells like varnish

[@timothybyrom5560]

Next an old David Bradley.

[@whatnowstinky]

I am hoping to see a PM 270 Canadien... i have one in the shed waiting and would love to pick up some tips.

[@rollinhull5876]

Can I pick your brain on a husky model 61?

[@KensSmallEngineRepair]

MukLuks, hard to kill them!

[@timothybyrom5560]

58-60 I believe.

[@pm270100]

k 88 kit

[@timothybyrom5560]

Wrong plug. Don't take extended tip.

[@mrxlh]

More Mac magic............

[@HemiOrange]

⬅️

[@timothybyrom5560]

Gas boilers