Fabricating a Custom 6L90 C10 Transmission Tunnel - Bagged LS Swapped Chevy Truck Ep. 3

[@91ludesit]

I think it is incredible you take the time to blend the welds even though they're gonna be seam sealed anyway. Not many builders would put in that level of effort.

[@SalvagetoSavage]

We just want it as clean and as smooth as possible for the next guy!

[@LumenateTV]

Ton of work to get to this point. Lots more to come, too, starting to think all you make are the coolest trucks on the entire continent!

[@SalvagetoSavage]

Thank you so much!

[@garylewis6192]

Workmanship and attention to detail is top notch Love watching you guy Learning all I can

[@SalvagetoSavage]

Glad you enjoy it! Hopefully it inspires you to get wrenching in your garage!

[@garylamb4777]

Man that is a big Job. Glad they have the rite Crew putting in work . Going to be better than factory . Glad you take the time to explain the process. Another great video S2S ....

[@SalvagetoSavage]

Thanks so much! Glad you like the content!

[@IIVIIV_S.A]

Another Banger! Explaining the process step by step - MAGIC! Proper build channel - Best on YT in my opinion.

[@SalvagetoSavage]

Wow, thanks! That mean so much to us!!

[@pete1973x]

You're a hard working bloke and leading by example. Really great work. Appreciate you taking the time to document it.

[@SalvagetoSavage]

Thank you! We appreciate you watching!

[@miguelvaldez6837]

Great video Mikey, u did a ton of work on trans tunnel & firewall , everything looking amazing 👌

[@SalvagetoSavage]

Thank you!!

[@BrianSteele-c8o]

A Lamborghini with Tesla engine or Ford Ev ⚡ lightning engine for Salvage 2 Salvage build would be awesome to see😊

[@SalvagetoSavage]

That would be awesome! Definitely on our list if we do another EV!

[@fishpony1211]

Damn so much metal work. It looks great

[@SalvagetoSavage]

Thank you!

[@tylerbarrett6652]

It's really coming along - looks great!!

[@SalvagetoSavage]

Thanks!

[@jasonpaine9546]

Love all the metal work!

[@SalvagetoSavage]

Well we got a ton more coming at ya next week!

[@allenwind6412]

looking good. Cant wait for the finished product!

[@SalvagetoSavage]

You and me both!

[@oldblueshhrchannel1847]

Great job Mike, thank you for sharing your experience!

[@SalvagetoSavage]

Thanks for watching!

[@1973GLH]

The entire rebuild continues

[@SalvagetoSavage]

We might as well have had a full cab repressed at this point! lol

[@willemp6432]

When you done. That thing will float. 👉 🎸

[@billybike57]

Mikey, in large and takin charge! Great video

[@SalvagetoSavage]

Can’t always sit at my desk ordering parts, cleaning the shop and going to the bank. Lol.

[@wickedc10]

Yall are doing a bomb ass job! 👏🏻👏🏻

[@SalvagetoSavage]

Thank you!

[@ChannelDCF]

Again great job the work is so clean the pride in your work just comes out in every episode! Keep it up and lets get more content out sooner! Great job guys!

[@SalvagetoSavage]

Much appreciated!

[@NeverLetOff]

Let's go!!! This C-10 is next level. You guys just keep one upping yourselves. Keep it up!

[@SalvagetoSavage]

Thank you!

[@1gunrunner351]

That "little doohickey" is a sliding T-bevel, I learned that in 6th grade shop class.

[@SalvagetoSavage]

Our name for it sounds better

[@neilziesmer6109]

LOOKING GOOD MAN ,WISH I HAD A SHOP .MY TRUCK NEEDS THAT TREATMENT

[@SalvagetoSavage]

Most of this stuff can be done in your garage!

[@bradkraus5217]

Awesome video Mike!

[@SalvagetoSavage]

Thanks!

[@Mrc-vy7cn]

Y’all have one of the best channels I love y’all work

[@SalvagetoSavage]

Can't tell you how much that means to us! We put a lot of love into what we do, and it a good feeling knowing y'all like what we're putting out!

[@Mrc-vy7cn]

@@SalvagetoSavage we love it

[@lowtidecustoms1166]

Your Killin it Mikey!! So slick

[@SalvagetoSavage]

Thank you!!

[@oldman7452]

Excellent progress. Trans tunnel looks like GM should've built it.

[@SalvagetoSavage]

Thank you!

[@PowerHousePerformanceLLC]

Another awesome video, giving motivation to everyone who watches. Cheers

[@SalvagetoSavage]

Awesome, thank you! Glad you enjoyed it!

[@lukesmotorshop]

Hell ya man!! Nice work!!

[@SalvagetoSavage]

Appreciate it!!

[@SomeBoredGuy69]

Better than factory! 👍

[@SalvagetoSavage]

Thank you!!

[@mmvic6]

gee willikers batman🔥🔥🔥

[@samperras]

Good work Mr Mike

[@SalvagetoSavage]

Thanks!

[@Siyadlams]

The tunnel looks good. I loved the metal fab work. Wouldn’t dollying the tunnel provide extra strength to it?

[@SalvagetoSavage]

It would, but we're putting other bracing on it to keep the strength!

[@LuisRamirez-ts3rp]

Hats are hot 🥵 🔥🔥🔥

[@bazilwreckerloughead]

So much work done to just the cab...& that's not all. I know guys who don't put that much work into the entire truck, but they still slap some paint on it & call it finished!

[@SalvagetoSavage]

For everything we have planned for this build, we knew we needed to start it off right! Don't want this baby rotting away after a month on the road!

[@JEREMY-xq7sk]

Great job! Where are the rest of your team, because you have been killing most of this build yourself?!?

[@SalvagetoSavage]

Working on some other projects and getting down on other parts of the build!

[@Jusdin057]

It is looking so sick 🤙

[@UncleManuel]

Say "seamsealer seem seal seams seamlessly" three times fast. 😁😁🤘🤘

[@SalvagetoSavage]

We tried and immediately failed! lol

[@suprmn1978]

Here we go! I love Wednesday. Lol

[@SalvagetoSavage]

Hope you like the episode!

[@LuisRamirez-ts3rp]

My savages the savagery continues 🔥🔥🔥💪🏽👀c yall

[@SalvagetoSavage]

Appreciate it Luis!

[@LuisRamirez-ts3rp]

I appreciate all you guys especially the content

[@DuminguMphande]

dope as always

[@SalvagetoSavage]

Appreciate that!!!

[@MissionRestomod]

I probably would have done some bead rolling to the toe boards and trans tunnel.

[@SalvagetoSavage]

There are going to be some extra supports added to the trans tunnel, so we're not too concerned with rigidity since it's going to be added back in with additional bracing.

[@paulthompson8642]

Thank you

[@SalvagetoSavage]

Glad you liked the episode!

[@c10vatos23]

Hope you make it out to Dino's Git Down!

[@SalvagetoSavage]

We will be there 10000000%

[@AN-eo9pf]

Would've liked to see some bracing on the underside of the tunnel to compensate for flex

[@SalvagetoSavage]

It’s 16 gauge metal, it’s very solid

[@joseluisnba1]

She’s beautiful 👌👌👌👌

[@SalvagetoSavage]

Thank you!

[@pedrofernando176]

🤙👍

[@Scott_G]

Dime Bagged.. now THAT'S a cool name for this build. Is there a reason you aren't saying that in the video? If I shouldn't say it here, feel free to delete my comment.

[@SalvagetoSavage]

oh no worries. when these episodes were filmed we were still trying to sell the name to the owner. Thanks for the support Scott

[@Scott_G]

@@SalvagetoSavage I assume since the merch is up on the site, the owner agreed?

[@normgraham6658]

for gods sake!!!! buy that kid a faceshield!!!!!

[@SalvagetoSavage]

We got a bunch hanging on the wall. Like the old saying goes, "You can lead a horse to water, but you can't make him put on a face shield when he picks up a cutoff wield to chop a bunch of rust out of an old chevy." Or something like that

[@albegt98]

💪💪💪

[@olterry1981]

you guys are fixing the rocker panel seams. i hope

[@SalvagetoSavage]

There's a lot of stuff that gets worked on and fixed that doesn't make it on the episode. We try to make sure as much gets in to the episode as possible, but if it really stops the flow of the video, sometimes it gets left out!

[@mrm4155]

good job, why the 1/4 stip and seam sealer instead of doing a full lip and weld to the cowl to close it off?

[@Billimus68]

I'm just getting started doing the body repair on my 1973 CJ5. First project I've ever done like this. what are you guys using for seam sealer? I'm looking for a quality product to use.

[@TheTrooper777]

Good 👍

[@SalvagetoSavage]

Thank you! Cheers!

[@AlexLopez-cf3he]

Beautiful work but why use a 6L90e transmission why not a 4l80e or even 4l60e with alot less software issues and when you install high performance parts they tend to fight with the programming or software updates that will be needed further down the road for a 6 speed automatic?

[@SalvagetoSavage]

We wanted a 6 speed in this thing because chances are, especially down here in South Florida, this truck will see a bit of highway cruising. We didn't want this thing screaming down the highway trying to hold 85mph getting from Miami to Boca. The main issue with these 6L90 are usually the torque converter, but we have a fix for that if you stick around a few more episodes. And our aftermarket controllers and ECUs should handle the programming no problem. A 4l80 or 60 would work great in this build too, it's just wasn't in the cards for this build or customer!

[@AlexLopez-cf3he]

@@SalvagetoSavage definetly sticking around to see more and interested to see that fix. 💪🤝💪

[@michael217martin]

I didn’t see the red and black hat on your website

[@michaelrolleri2085]

yah we haven't had a chance to get that one uploaded yet. but if you want it just order another one and make the note and well get you cover up.

[@michael217martin]

@@michaelrolleri2085 okay cool thanks

[@serhiyUman]

its not C10, its C10000 😅

[@FrankGallardo-d9m]

Looking sikk bro

[@SalvagetoSavage]

Thank you!!