Рет қаралды 12,787
I make a roof tray for the ute which turns out really well.
Cutting List:
2 pieces of 50x50 x 5mm angle for the sides
6 pieces of 25x38 x 1.2mm rectangular steel tube for the middle
4 pieces of 40x40 x 3mm square tube for the feet
4 pieces of 80 x 40 x 3mm flat steel for the feet
Fasteners:
4 x 60mm M8 Stainless bolts
4 x M8 Stainless nylock nuts
8 x Stainless washers (as large as possible to spread load from inside canopy)
Follow Me!
Instagram / rc.adventures
Facebook / ryvalcreative