Fabricating Frame Rails And Leaf Springs For Our '64 Comet A/FX Drag Car - MuscleCar S3, E23

Rick and Brent fab the rear frame rails for Altered E-Go, the '64 Comet A/FX drag car, and set the ride height to measure for custom leaf springs. Rick demonstrates a variety of custom paint techniques on a motorcycle helmet. Get an update on the Goldberg Superbird project, slated to be auctioned by Barrett-Jackson to benefit the Darrell Gwynn Foundation.
Follow POWERNATION Everywhere:
www.powernation...
/ powernationtv
/ powernationtv
PARTS USED IN THIS EPISODE:
Anest-Iwata Usa Inc.: Craig Fraser skull templates.
Anest-Iwata Usa Inc.: Kustom Micron CM airbrush equipment.
Gillett Evernham Performance Parts: The engine development on the R5-P7 Dodge Magnum 5.9-liter engine is performed at Gillett Evernham Engines in Concord, N.C. From innovative computer modeling systems to advance tooling equipment to full-scale dynamometers, Evernham Engines creates and builds the most competitive engines in racing.
YearOne: Converting Bill Goldberg's Plymouth Satellite into a replica of an original appearing Nascar race car, The Superbird. Proceeds from the auction at Barrett-Jackson to be donated to Darrell Gwynn Foundation.

[@ralphvalkenhoff2887]

I had a 70 rr. Loved it. B 5 blue and custom welded keystones with fire hawks to fill the wells.

[@jeffgoodenough9932]

Hello from Michigan that helmet turned out fantastic great job.

[@tphvictims5101]

The FORD Teardrop Hood Scoop is the ONLY WAY TO GO.

[@soorajrajankadakkal1509]

Nice prevention bro’s , really good 👍

[@darkwarrior9743]

Same here miss the show in 🇭🇲

[@otsenres1636]

Awesome painting skills!

[@higlakol]

As soon as weed is legal y'all need to give Brett his own 2 hour segment lol. One of my favorite members of the crew. Edit: Brent*

[@fahisaurus]

Today is the only time I've heard someone talk about a 4 speed transmission like it's cutting edge technology.

[@basshead.]

I like the Powerglide. Less is more.

[@bmstylee]

@The Truth about Africa hurts so what you are saying is GM and Dodge and Mercedes and BMW and Ford and Ferrari and Aston Martin and Lamborghini and Audi and every top shelf racing series outside of NASCAR who is stuck in 1958 are stupid for putting 6 or 7 or 8 speed gearboxes(8 speed in F1) in their cars because they don't have a performance use? 🤦‍♂️

[@bmstylee]

@The Truth about Africa hurts you said performance application not drag racing. Turning corners is a performance application.

[@hussainfadwani3828]

there is a serious sideburn outbreak in TN.... I can't think of anyone that has normal length sideburns on Powernation.

[@peasl001universityofminnes6]

kzbin.info/www/bejne/ZpS7gGWNndmMb5Y

[@bluegrassman3040]

Probably an older show.

[@hussainfadwani3828]

@@bluegrassman3040 naw man I've seen new videos from Tommy and Marcus with the giveaway car. There is a theme at powernation and I like it!

[@johnds6621]

How do you align everything so the car looks like and is going down the street straight?

[@bradmaas6875]

If you're in an area that requires a helmut, painting over the DOT is not usually considered a good thing. Sweet otherwise.

[@everettgrover9459]

There usually is another sticker inside the helmet that would say if it meets DOT requirements

[@bradmaas6875]

@@everettgrover9459 DOT standard, These are their words, not mine. "In an effort to make counterfeit labeling of non-compliant helmets more difficult and legally risky to those who do it, the DOT label displayed on the back of the helmet must now include, in order from top to bottom: The manufacturer’s name Model number or name “DOT” below the manufacturer’s name “FMVSS 218” centered below DOT The word “Certified” below FMVSS 218"

[@bradmaas6875]

My helmet only has it on the back, not inside

[@everettgrover9459]

Brad Maas thanks for clearing that up, and it makes sense, I have seen helmets with the stickers inside before, then again that was also pre 2005 so yeah there has obviously been some changes for the helmet DOT certification

[@bradmaas6875]

@@everettgrover9459 No prob, just don't need to give our blue friends another reason to stop and chat with us.

[@PhillyDee215]

Nice 👌

[@74beeper97]

Where’s the dyno results of that 410 small block Mopar you did? What’s the hold up?

[@georgel5308]

These videos are like ten years old

[@74beeper97]

Yeah, but the 410 Mopar video is new and it’s the same KZbin channel who uploaded it. I want to see the results dammit!

[@ConemantheBarbarian]

Did this Comet ever get finished. Seems to me they did a show restructuring before they got done

[@bmstylee]

It does. It was pretty cool.

[@davidhusband5022]

TRUMP 2020 from Australia!

[@adamturner2507]

Superbird should have had a dodge motor

[@bmstylee]

Nah. A built LSX. 😆

[@jasonmyers3847]

@@bmstylee 🤣

[@scootergeorge9576]

Looks Like Sue Zookie sold her Boulevard!

[@axlegrind4212]

lmfao 0:59 *using his plasma cutter for a hammer* 🤓

[@Gumnaam-Parindey]

Where's S3 - E24

[@darcybrawataakaontariostac6835]

Wish i could see this comet build from start to finish

[@JMAGG]

What happen with the LeMans?

[@bmstylee]

Finished and paid off. Was a good looking car.

[@justincase8239]

Why leave the stickers on it?

[@pashekkooficial6157]

BRASIL

[@shaneharrison4775]

Although the bumper should be big enough to hide it

[@MrAcuta73]

Hmmm....I suddenly feel like I need a hotrod toilet seat....

[@k6racebike]

The best part? He gets to park his bike for not having the approval sticker visible...

[@futten3230]

way to little on the AWB car

[@jasonmyers3847]

Did they seriously put a damn Chevy engine in that Super Bird? Puke!

[@shaneharrison4775]

Just dome it and put a styling hump in on each side in front

[@heffytomad4741]

Why is that car not on a frame bench?

[@8632tony]

Lose the growly voice. It's hokey.

[@johnmirbach2338]

😁✌🖖👌👍😎

[@MoparMan-ff8fb]

Lol takes off on a honda .

[@itsjustdead_dcg6175]

2400th viewer

[@mallanac]

Whenehee willehee youehee getehee ridehe ofehe thatehe nasalehe introducingehe naratorehe? Heehe ishe soeh anoyingehe toehe listenehe toehe.