Fabricating Steel Sawhorses

[@rhinomite5203]

Made a set very similar and love em, used barrel hinges and all 2x2. Great design

[@manolosalazar1587]

Sir lakeridge, I'd like your demo for making sawhorses, very simple, thank you, and more power.

[@Hunanyan]

Very simple and functional. Thanks for video.

[@ocuituco9]

Very functional and very simple 10-4👍

[@Spud799]

please, show how you cut the angles. thanks

[@منذرالعراقي-ف5م]

تحياتي الك من العراق عمل متقن وجميل شكرآ لك

[@antelmoperez6475]

Que chulada trabaja usted mi amigo saludos desde juarez Chihuahua

[@LakeridgeWelding]

Gracias Amigo!

[@richardchristie5355]

Am a beginner with a Chinese 650 amp weld machine (Zard). I often see the 6013 rod set at 40/60 amps on a 150 amp machine would i set the same amps with the 650 amp machine with arc force and hot start. Thank you

[@LakeridgeWelding]

Hi, I'm not very familiar with arc welding but there are some good KZbin videos out there you can learn from. Good luck! Just like anything else, the more you practice the better you will get!

[@parmenioflorez4656]

Muy sencillos y muy útiles lo felicito

[@jorgeibanez9361]

Por favor medidas y grados cortes

[@claudiodaxrepereira4779]

Very good

[@leyendacm5352]

Muy buen trabajo ,mis saludos de la Perú

[@juancarlosrojascotari4503]

hola saves a que angulo corto las paratas

[@chejvasquez5202]

@@juancarlosrojascotari4503 15

[@MrNytrosdad]

I feel like asking you what angles you cut them at, just so you can answer that question 10,000 more times... Nice job on the work..

[@LakeridgeWelding]

Thank you!

[@kji88]

Could you have avoided the large gap by turning the 1.5" x 2" tubing the opposite way?

[@LakeridgeWelding]

Yep! After I made this video, I acquired more hinge and welded it on between the legs and removed the short pieces at the ends. I also cut out the bottoms of the tube at the ends so I can clamp things easier.

[@rhinomite5203]

What gap? He glued it closed with his wire gun 🧑🏽‍🏭🧑🏽‍🏭🧑🏽‍🏭

[@juanmanuelsaucedo4043]

grades?

[@Spud799]

i like it, can i ask how many degrees of angle , you cut the iron tube? Thanks

[@LakeridgeWelding]

Glad you enjoyed it, I believe I cut the legs at about 107°.

[@hipairbrush1053]

@@LakeridgeWelding Would that be the same as 73 degrees flipped the other way?

[@LakeridgeWelding]

@@hipairbrush1053 I believe you are correct

[@jamesrowe6389]

I may have missed it, but what angle are the legs cut at? I love the build. I will be making a set of these in the next couple of weeks. Hope mine come out as well as yours. Have been looking for a saw horse set that I could put out of the way when not in use. Thanks for the video.

[@LakeridgeWelding]

James Rowe The angle I cut the legs at was around 107° and it came out nice and flat. You do end up with a bit of a gap on the outside of the legs with this design. I also recommend using a full strip of piano hinge between the legs, I only had the one piece at the time so I just tacked them in for the sake of the video. Thanks for your interest, if you have any questions feel free to ask!

[@aliifraid9659]

Very good job thank’s a lot

[@RoderickDeAlbeniz]

in which angle short the stringers

[@LakeridgeWelding]

I cut the legs at about 107°

[@Dedmoroz-z3l]

what is dimensions? of yours sawhoses?

[@przemo218mucha4]

👍

[@carsonsensing1363]

Nice! Thanks for sharing. Approximately how much do they weigh?

[@LakeridgeWelding]

They're relatively light, probably around 10-15 lbs.

[@carsonsensing1363]

Wow, that’s not bad at all. Thanks!

[@ggr7249]

الله يبارك

[@asonaasona2582]

I am happy to meet you and subscribe to your KZbin page I work in the field of welding, my specialization is technical blacksmithing

[@haderallamy5049]

💪🏻❤️

[@WilliamGarcia-ic3tm]

Medidas. Del burro por favor

[@tonyborg4510]

Poor dog is hungry😂

[@umpedreironaestrada]

Show. Like

[@joseluizsouza9961]

Like dog 6:46

[@aderbalmsilva8693]

👍👏👏

[@soulbrothers7789]

Bad build :(

[@LakeridgeWelding]

Soul Collector if I was to do it again I would change a few things. I have another video that I should be getting out soon where I put on the rest of the hinge, as I only had about a foot of hinge when I filmed this.

[@evadevries2952]

Good call. The hinge was the weak point. Great design for fast build portable. I like it!