Here's a REALLY important thing the video misses, that you MUST do. So when you go in to maintenance mode, do NOT choose option 99 at first. That will actually EXIT maintenance mode. You have to scroll down to option 91. That's the one that does the reset. Press ok. THEN when it's back at MAINTENANCE toggle back to 99 and press ok again - to exit. We tried the steps above multiple times before we found out that 99 just EXITS maintenance mode without doing anything.
@leonardorodrigo27923 жыл бұрын
Te mereces todos los likes, fue muy útil tu ayuda, Gracias!!
@susankay4973 жыл бұрын
Thank you, thank you, thank you... You have saved my SANITY :)
@jonathangomes74262 жыл бұрын
If it wasn't for you and I would never have made it, thank you so much for your help!
@mbilalakhtar92222 жыл бұрын
Thank you so so much.
@sgreen16952 жыл бұрын
Great Video. - Tank you! After a little research This is the codes for the MFC L8850CDW- Hold the House button 5 sec, new screen with serial# and Rom show up - go to 4th box (blank) and hold it for 5 sec- New screen - Hit the LCD keys- *2864 then wait, Hit keys 01- then wait - Finally hit keys 99. Your Printer is reset to factory. God Luck. Hope that helps others searching out there!
@303electronics2 жыл бұрын
Thank you for sharing!
@you85844 жыл бұрын
I got it now...thank you so much...this helps a lot...on my machine, leave the front door closed...but it works exactly as the gentlemen explains here...very good!!
@skjbanks Жыл бұрын
Worked for MFC-J4335DW! Thank you!
@Zazai3134 жыл бұрын
Thank you so much for you were help because I was have a longer same problem my printer was doesn't work but I was try now you were trick it was working god bless you 🙇♂️🤗
@rejeanwolfe37563 жыл бұрын
How about going slower for the instruction!!,, I have plenty of time and I want to do it correctly. just an idea like that? Tks
@303electronics3 жыл бұрын
Thanks for the suggestion. I will keep that in mind in future videos.
@robertbricker4 жыл бұрын
Went through all steps. Did *NOT* reset the password
@donna-maygardner63164 жыл бұрын
I’ve done exactly what u have said but I don’t get a long beep, therefore I don’t get the maintenance screen. Please help.
@nursari6814 жыл бұрын
Same issue here, I could not reset it, please help!
@brandonfriesen92284 жыл бұрын
I have been trying this for the last couple of weeks as time allows and I can't get mine to do this. It just selects different beeping menu options as I type the numbers. I open the door, press menu, star, 2 8 6 4 and I never get the long beep.
@303electronics4 жыл бұрын
What is the printer model you have?
@robertbricker4 жыл бұрын
You have to press menu and the key sequence very quickly
@you85844 жыл бұрын
what would it be for a brother MFC-8670DN....? Also what is the factory default password/number please? thank you
@303electronics4 жыл бұрын
It should be very similar to this printer. Also, try this video: kzbin.info/www/bejne/kKaohJZ7a7-pldk
@sofilifili64554 жыл бұрын
My print is MFC -L2713DW with toner TN2445. Could you please see how I can reset my toners.
@303electronics4 жыл бұрын
Hi. Try these videos: kzbin.info/www/bejne/fGazmZWIbqaNj68 kzbin.info/www/bejne/ip-8d3Vngpljnsk
@bmack69753 ай бұрын
1:01 EST how can I reset to factory MFC 7360N
@azoragroup22393 жыл бұрын
This advise did not work in my printer as it only beeps when I enter the numbers you provided. When I go to menu it only shows menu for settings 1 copy and 2 fax, for printer and network it only beeps. I don't know what to do!
@303electronics3 жыл бұрын
Hi. What is your printer model?
@stelthcamo3572 жыл бұрын
My scanner only runs half way across then goes back only scanning half my page how do I fix that
@inlightenedbeing4 жыл бұрын
I have brother MFC 7820 and how do I fix Error message back door open?
@samgreen75813 жыл бұрын
Hello sir My printer is Brother MFC -L6900DW I read my manual and no instructions to reset the password. how can I reset the password please
@303electronics3 жыл бұрын
Hi. I do not have a similar printer at the moment, but check out this video with a touch sensitive control panel and see if it gives you an idea on how to access resets menu. I will look around my inventory and see what I can find online to help you. I will update you if I find a solution for you. kzbin.info/www/bejne/hHm0ep1rq6d4n7s
@samgreen75813 жыл бұрын
@@303electronics thank you much sir I will apply these steps. I update you on the progress also please update me for a exact explanation of the MFC- L6900DW how to reset function locked please
@robwiancko99722 жыл бұрын
Don't know if this would help but on my Brother printer I did the following: To find the overall password: -in your browser goto the ip address of the printer -goto lists/reports -goto Network Configuration -hit print -password at bottom of printed page
@robwiancko99722 жыл бұрын
To find the overall password: -in your browser goto the ip address of the printer -goto lists/reports -goto Network Configuration -hit print -password at bottom of printed page
@groovyhoovy6133 жыл бұрын
Does this remove lines from scanning?
@303electronics3 жыл бұрын
Resetting the printer will not remove lines when scanning or copying. Here is a video that will help: kzbin.info/www/bejne/nqa8eKKVqa9qrbM If it happens on all prints, you may need to see this video: kzbin.info/www/bejne/qIPEoax7aauZY7c
@cedrichargraves95833 жыл бұрын
I need help with this printer when I open door it says on screen that door is open
@303electronics3 жыл бұрын
Hi. See if the tab that sets the open door sensor on and off is not broken or bent
@krishnarajbhandari35122 жыл бұрын
Good
@AceGoes4 жыл бұрын
Is this suppose to reset the password as well, because I tried it and I still can't login to the web gui with the default password.
@robwiancko99722 жыл бұрын
To find the overall password: -in your browser goto the ip address of the printer -goto lists/reports -goto Network Configuration -hit print -password at bottom of printed page