FAILED PRODUCT WHO DOES THIS AND WHY ?? Jeep JKU Radiator Hoses DIY

Jeep 3.6 lower Radiator hose amzn.to/3U5TtFf
Jeep 3.6 Upper Radiator Hose amzn.to/3UbiqPE
Petcock Socket Set amzn.to/3Ux3HQt
Radiator Hose Pick set amzn.to/3xEdhrJ
Hose Clamp Plier Set amzn.to/3U2bV1o
Spill Proof Funnel Kit amzn.to/3JoiAhm
Lots going on in this video as I replace the upper and lower Radiator hoses in my 2014 Wrangler Jeep JKU
DISCLAIMER: Due to factors out of the control of BackCountry Wrenching and Bsk Garage, we cannot guarantee against improper use or unauthorized modifications of this information. BackCountry Wrenching and Bsk garage assumes no liability or responsibility for property damages or injury incurred as a result of any information contained in this video and all other videos produced by BackCounty Wrenching and Bsk Garage. Use this information at your own risk. BackCountry Wrenching and Bsk Garage recommends safe practices when working on vehicles and/or with tools seen in this video. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not BackCountry Wrenching and Bsk Garage Be safe! This video and description contain affiliate links, which means that if you click on one of the product links, we receive a small commission. This helps support the channel and allows us to continue to make videos like this. Thank you for the support!

[@chuckisbusy]

In the jeep forums, everyone says to just pull the rad hoses. Don’t even bother with the petcock. There also an o ring in there you have to worry about too.

[@BackCountryWrenching]

I’ve read that too, but wanted to recover some coolant and not make a huge mess

[@moabwheeling1305]

I'm going to have to change out the heater hoses on my wife's JK next month .They are becoming swelled . Should be a lot of fun since the heater core ends are buried half under the cowl . I do have the set of pliers for the spring clamp so that should help. Thank you for the like on IG the other day its much apricated Jerry .Great video again and I will catch you on the next one. Pets to Ms. Carmen from me please.

[@BackCountryWrenching]

Let me know how the project goes

[@moabwheeling1305]

@@BackCountryWrenching Yes sir I will. Have some more parts that I ordered coming in this week. I will post more pics on IG as it comes along.

[@scha0786]

Yes. I spray it inside the tube and on the neck. The hose still sticks but usually breaks free with a twist. I picked that trick up from a snowmobile mechanic. He used it on the carb boots.

[@murphtahoe1]

Engineer Johnny strikes again with the stopcock. I elevate the front end about 4 inches to make the radiator cap opening the highest point to the atmosphere and drink a beer while burping my system since I’m lazy. Wouldn’t mind having a vacuum system to fill my system, but I’m too cheap to buy one. That matching sterio screen and instrument cluster is freaking cool!

[@BackCountryWrenching]

I should just do that as well and make life easier

[@TheTuscanyGuy]

I bought an airlift coolant vacuum tool for my car and it was the best tool investment yet. Fills the coolant in a few minutes and zero issues with air in the system. Porsche can be a pita to get all the air out of the system with its rear engine/front rad design

[@BackCountryWrenching]

What are they worth ?

[@TheTuscanyGuy]

@@BackCountryWrenching my kit was maybe $250 but you can get cheaper kits under 100. It’s the cats ass for filling coolant

[@justhes]

I love the consistent creaking of the step stool lmao.

[@BackCountryWrenching]

Prolly the same sort of sound the Titan sub heard before it imploded 😂🤣😂🤣

[@justhes]

@@BackCountryWrenching lmao!

[@Teh-Jones]

Everyone take a drink when you hear a creaking of the step stool! (call an ambulance first)👍🐸

[@brbadventurer]

23:23 Our Wrangler does that too, if I flip it over to auto, then it corrects its self and we can use the controls to change the modes.

[@scha0786]

I use silicone spray on coolant hoses. Helps with install and makes removal years down the road simple.

[@BackCountryWrenching]

Works good for even removal ? I’ll have to keep that in mind

[@barryrose8360]

Had the same air lock issue. Put the front end up on a 4x4 and do all you did. Fixed my issue

[@BackCountryWrenching]

Awesome that was going to be my last resort

[@barryrose8360]

I’m not a mechanic, I had no idea about the air vent under the intake. Thanks

[@ODWingsfan]

First thing I do with those heathen hose clamps is throw them away with the old rad hose. Get new stainless clamps with new hose.

[@shayneb3327]

WTF?? What was the masterminds at Jeep thinking?? Your hood decals says it all!!!!

[@BackCountryWrenching]

To be all honest the radiator isn’t a OEM part

[@raymonast4753]

I believe Engineer Johnny designed that petcock assembly😊

[@BackCountryWrenching]

I’m sure he did too

[@MrBrewner]

Hey Jerry. I have a question that I can't seem to find anyone with any idea. When my trucks temp is at normal operating temp (200 degrees F) I can literally hold my hand on the rad cap. The cap does not get hot at all. Now I'm no mechanic but I do know that's not right. Any ideas? I'm thinking bad cap but again I'm no mechanic.

[@mzantow2000]

Thanks for reminding me why I never buy a Jeep

[@jeffi.8074]

Beautiful work. That radio is sexy

[@BackCountryWrenching]

Yeah it sure is

[@mariotibbrine1]

Dual heater cores?

[@mariotibbrine1]

Sometimes you can jack up the front-end and the bubbles pass faster

[@RubinsRacing350]

Helloooooooo Jerry!!!

[@kawasakirule3707]

Omg with all your ISSUES. WHY 😅😅😅😅😅

[@danhambrick6331]

Jerry,you gotta admit,you were overdue for a Shit Show...😁👍👍

[@barryrose8360]

I’m on my third radiator, first two OEM, this last one after market. All three had the same bullshit petcock

[@BackCountryWrenching]

I don’t understand the reason why…… why even build the rad with a fake one

[@siliconvalleyengineer5875]

Ive cut the shit out my hands before on sharp edges on sheet metal hose clamps, it was good to see you bought the hose clamp vice clamp set.

[@BackCountryWrenching]

The hose plier set is a life saver