RANT !!!! HOW NOT TO RUN A BUSINESS

Triple Lens Endoscope amzn.to/47OcTD9
70mai Dash Cam amzn.to/3S8D3uJ
Bulletpoint Dash Mount amzn.to/4blxUZ4
Patreon www.patreon.co...
This is my Rant on a recently order part that took forever and I had to file a Paypal claim against.
DISCLAIMER: Due to factors out of the control of BackCountry Wrenching and Bsk Garage, we cannot guarantee against improper use or unauthorized modifications of this information. BackCountry Wrenching and Bsk garage assumes no liability or responsibility for property damages or injury incurred as a result of any information contained in this video and all other videos produced by BackCounty Wrenching and Bsk Garage. Use this information at your own risk. BackCountry Wrenching and Bsk Garage recommends safe practices when working on vehicles and/or with tools seen in this video. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not BackCountry Wrenching and Bsk Garage Be safe! This video and description contain affiliate links, which means that if you click on one of the product links, we receive a small commission. This helps support the channel and allows us to continue to make videos like this. Thank you for the support!
#rant #anger #1stworldproblems

[@danhambrick6331]

Jerry,I thought you were overdue for a rant...😁😁 I went through the same thing with a knife.When I turned the company over to PayPal,they expedited my order and I had it in 3 days... Unreal......

[@BackCountryWrenching]

Sad for this to happen

[@SteveRobReviews]

More and more businesses are going under because they get exposed for bad customer feedback. It's self-inflicted most times as ya never know who is mentioning to others the bad customer service 😉

[@BackCountryWrenching]

That’s so true Steve

[@jeremyjmailloux]

Extreme Tools was almost as bad when I tried to order a 55" Pro series top and bottom box like 5 years ago. Started at $3300 and free shipping. almost 4 months later they tried to charge me $4200 and $700 shipping (Edmonton to Ontario). By that time I was pissed told them to shove it and bought a brand new 54" Snap-on Masters series with bedliner powertop the same day for $8088. People ask why I spent so much on Snap-on, it's because my dealers customer service is second to none. Multiple times she's gotten in her truck and driven 1.5 hours one way to drop off a tool I've desperately needed. 👍

[@BackCountryWrenching]

You can’t beat a Snap On tool box for sure…. My Snap On tool rep was lazy he didn’t go out of his way for nothing

[@jeremyjmailloux]

@@BackCountryWrenching Yeah I traded in the 54" Masters on a 120" Epic Mr.Big with dual workcenters and bedliner powertops. Absolute dream box. I just dread the day I have to move it. 2400lbs without tools. 😆

[@kenuber4014]

WTF Jerry? You got a "Red Light" alert in the beer cooler!! Lol

[@Ulford]

Love your rants, Jerry.

[@danhambrick6331]

I picked up that same kinetic rope around Christmas but haven't had a chance to use it yet..I looks to be pretty nice, especially for the price....

[@timkalal6983]

I agree with you Jerry,it’s getting to be crap with a lot of businesses,Amazon is a big one for me,there service is complete crap in my area in the states,$140 membership fee and everything takes forever to show up,complete garbage,and right now I’m in my 4th week waiting for a refund on a item I bought in early December.

[@BackCountryWrenching]

Really Amazon here is spot on always get my stuff same day or next

[@timkalal6983]

@@BackCountryWrenching I certainly believe you but the service is not the same everywhere, I have family in Kansas and there service is like yours.

[@timkalal6983]

I’m in North Dakota and the service is complete garbage.

[@barrycriswell8967]

Ive had Amazon for 8 yrs or so and yes fees keep going up but i order alot and have only had problems with 3rd party's . Gotta pay attention

[@timkalal6983]

@@barrycriswell8967 waiting a month for a refund on a item sold and shipped by Amazon, what do I need to pay attention to again??

[@whateverrobert]

I totally agree. I had a similar situation like that but no taxes duties. But yeah get the krap together listed for sell buy then ship yup. When people let ya sit and check shipping dates.

[@toolshedadventures]

As I have gotten older my patience for companies grows thin to the point where I simply can't be bothered to chase or pursue a company or person for something. If you value your business and my time you will ensure I am updated or have some means of resolution if something doesn't work out. Small businesses don't like bad reviews or feedback and if I have an issue I will find a way to do so. I have had companies reach out asking if they can correct my issue after leaving a bad review and I just ignore them.

[@BackCountryWrenching]

Getting older and losing patience must go hand in hand

[@admin_OutdoorEd]

Bullet point products are great, love mine in my JL. I got stitched up by Quadratec recently. Ordered some skyjacker springs with some other parts. The springs added $200 in freight to the order. The site said in stock, but 6 weeks later still hadn’t been sent and was told they are on back order. I cancelled the springs and was reimbursed for the cost of springs but not the freight difference. Tried to argue that they didn’t change the freight after cancellation but they refused to hear it. A$$holes. Always love mother f@ckin beer time👍🇦🇺

[@BackCountryWrenching]

That’s brutal I’d be pissed

[@buckchase1]

Thanks for the vid!! I can't wait to get my TJ out of the garage this Spring (got the rear axel out of her now) and fresh new engine. MFBT from northern Maine

[@BackCountryWrenching]

Putting in a different rear axle ?

[@daves3016]

My guess on the oil leak is the rear main seal retainer gasket, i see it all the time, the upper part that covers the back of the cam leaks, gasket gets brittle.

[@BackCountryWrenching]

Very close

[@unusualaquariumecosystems5805]

Re the screws, buy a telescopic mirror and magnet set, life saver.

[@bauertime]

That screw fell right in the way of your blender door.

[@cgindustrial1859]

Hahahaha...your Rants...just like years ago!! I hear ya...I am drifting back toward brick and mortor for that very reason

[@BackCountryWrenching]

Right?

[@fedorp4713]

That mount probably cost more than some vehicles I've purchased.

[@BackCountryWrenching]

Most of your vehicles should have went to pick n pull

[@brbadventurer]

17:56 Wow, how handy is modern tech? That is an amazing tool. I have 2 quick tech questions. I picked up some mud tires on 17" Rubicon wheels, can the Rubicon TPMS be programmed to my Sahara computer, or should I dismount the tires from my Sahara wheels and swap the TPMS modules? 2nd question can your scanners change the PSI limit so it starts flashing below 32 PSI vs 35 PSI?

[@BackCountryWrenching]

Depends different years use a different frequency of TPMS. If they are the same frequency they can be programmed to them

[@simonilett998]

Very common on LS engines for the rubber strip gasket around the perimeter of the rear crank seal carrier/retainer plate to leak. Often mistaken for an oil pan or rear crank seal leak. Either way, it seems like pre-shitshow might be trying to live up to her bigger sis's name, and unfortunately looking like you might be releasing the sadness and dropping the trans out to fix it😥

[@Teh-Jones]

Wow, 3 months for that happy horseshit, smh... Love the rants as always..

[@BackCountryWrenching]

I know right

[@leakyjeep5.9]

Why the %$@# are they changing the size of gd usb? Holy fn hell.

[@BackCountryWrenching]

USB C is faster and can carry more current

[@davejames2015]

I mean maybe it's the oil pan gasket but... not really looking like it but how long would the top end leak leak when sitting.

[@daves3016]

he has redone the oil pan a bunch of times iirc

[@BackCountryWrenching]

That’s the million dollar question

[@offtheclaim1468]

You think with being able to leave reviews companies would get their shit together...a few bad reviews and that could be the end of a business...especially something specialized...

[@BackCountryWrenching]

It’s crazy how waiting this long for something is considered acceptable to them. If it’s not ready for sale then don’t have it for sale.

[@chrisl7511]

My guess is oil pressure sending unit

[@BackCountryWrenching]

That would be a logical guess for sure

[@PhatboyHD88]

So jerry whats the plan ? Your selling all your jeeps in 2 years ? Or keeping one of the 3 ? And why are ya selling them ? And if you are keeping one of the 3 which one ?

[@BackCountryWrenching]

Selling the JK and TJ and getting a 4x4 van or Colorado

[@edwingolddelirium]

Take with you a land anchor for off road.

[@BackCountryWrenching]

I’ve always wanted one

[@edwingolddelirium]

@@BackCountryWrenching they are easy to make, just choose one in google pics

[@Graveltrucking]

You waited that long to get that? WTF. Now you can make your Only Fans videos in your Jeep 😂 You know that screw you dropped in the dash will be chaffing on a wire shorting it out lol. In the next video we are going to see you have the dash of the car stripped out 🤣 That’s a lot of oil leaking out if you could dooche it down with brake cleaner then run it to see where it’s coming from. Have you got a plugged up PCV system, have you tried running the engine with the oil fill cap off possible blow by?

[@BackCountryWrenching]

That screw is lost forever and will hopefully make its way to the floor eventually or cause electrical gremlins down the road

[@jeremyjmailloux]

MFBT!! 🤘

[@shayneb3327]

Surprised they didn’t use the Covid card on your long delay getting your order. Seems many companies are still using that excuse!!

[@samsanderson7159]

Bulletpoint is nice stuff

[@BackCountryWrenching]

It sure is