Failure Mode and Effect Analysis (FMEA) | Quality Control Tools | Lean Six Sigma Tools

[@amittivari1062]

Nice video & your technic for teaching is great sir. Thank you so much

[@ShakehandwithLife]

Your welcome, and thanks for the appreciation.

[@benoevabeta8878]

Good video, was easy to understand, even though I am new to PM. Thanks for sharing this.

[@ShakehandwithLife]

Welcome🎉

[@sunillalwani9646]

Very nice.. FMEA was not clear for me but you have explained very nicely .. thanks a lot.

[@ShakehandwithLife]

Welcome🎉🎉

[@satyanarayana8676]

Good information abt fmea, useful video thanks.

[@ShakehandwithLife]

Thanks and welcome

[@sabaripandian116]

Very good techniques

[@ShakehandwithLife]

Thanks and welcome🎉

[@nagendrarajput8236]

I enjoyed a lot ur video.its very helpfull........thanks......

[@ShakehandwithLife]

Welcome

[@SarathKumar-mo8kg]

super sir, very informative with examples

[@ShakehandwithLife]

Thanks and welcome

[@ajaybabufarm7892]

Very nice information brother Thanks a lot for such information

[@ShakehandwithLife]

Welcome

[@yamahashimi1864]

Thank you very much (From Afghanistan)

[@ShakehandwithLife]

Welcome🎉

[@sreepranavam]

thank you for the video.. sir, u explained very well

[@ShakehandwithLife]

Pleasure, ur welcome

[@rajeshsalunkevlogs5007]

Simple nice explained

[@ShakehandwithLife]

Welcome

[@drbalarajujakkula2360]

Thank you sir for uploading the video. In the video at last RPN value was reduced value, in that how can we select manually S O D factors? Just prior to selection of S O D factors in second time you have mentioned the remedial action to improve. Action not at implemented, if suppose implemented again we need to conduct the re-examination. I didn't get clarity.

[@ShakehandwithLife]

Once you have calculated the RPN value, you need to prepare a corrective or preventive action plan, after implementation of the corrective and preventive action you need to again check whether the RPN is reduced or not. What remains for the clarification?

[@MaheshNerkar-w6z]

nice explanations

[@ShakehandwithLife]

Welcome 🌹

[@lily_3421]

I am from automotive industry, however I was still able to easily connect with the example you chose. Loved the way contents were organised and delivery of the same. Please keep posting such generic videos. Question : Do you have any videos on FTA (Fault Tree Analysis) ?

[@ShakehandwithLife]

Thanks , will make a video on FTA soon

[@singlewindow7515]

See my videos. Your opinion will be very helpful for me.

[@bveeresha88]

Ok

[@yuvaraj1824]

Nice sir

[@ShakehandwithLife]

Welcome🎉

[@rajpandey1008]

Am I not wrong 3 types of FMEA 01) system FMEA 02) Design FMEA 03) Process FMEA

[@ShakehandwithLife]

Of course u r right, system FMEA study the failure of a process under the multiple process in a system

[@ngocdhbk123]

It is very easy to understand when compare with reading docs. Thanks you so much. Could you please make video to present about FMEDA for VLSI ?

[@ShakehandwithLife]

Will try

[@H2O1167]

Thank you for this video. Do you have any presentation for Asset Risk Ranking?

[@ShakehandwithLife]

No, sorry

[@sivakumar-ul9kb]

Really good. 4th edition when u make a vedio sir?

[@ShakehandwithLife]

Very soon

[@uub249]

what are mandatory input documents for process FMEA??

[@ShakehandwithLife]

Design or process diagram, severity ranking table, occurrence ranking table, detection ranking table, cause and effect diagram, test methods, CAPA

[@MI-gr6lg]

Very nice explanation. But if you could zoom into sections you are referring to at different times, it would help.

[@ShakehandwithLife]

Thanks for sharing ur suggestions

[@AhmedKhan-jf4wg]

Is there any method to identify failure except fmea???

[@ShakehandwithLife]

You may use corrective action, fault tree analysis, but fmra is good one.

[@hemantpatil5337]

Sir, What is the acceptance value ( In-between failure mode and Action taken ) of RPN OR Through hold RPM -? Can you pls confirm.

[@ShakehandwithLife]

Watch this video on fmea in hindi kzbin.info/www/bejne/hYaueo2knJaIaMk

[@sanjeevkumarbathe]

can AIAG sev,occ,det rating guidlines can be used for HR,PURCHASE AND STORE IF not then what to do

[@ShakehandwithLife]

Take the example of Absenteeism in HR function, prepare the severity, occurrence, and detection table for the HR functions related to the absenteeism, find the severity of absence of the person, occurrence ( how often it is happening or what is the cause of absenteeism) and detection ( what are the current control for the absenteeism). Calculate the RPN value for absenteeism, take necessary corrective action and find the new value of RPN. Check whether it reduced substantially? Severity may vary according to the department.

[@sanjeevkumarbathe]

DOES WE HAVE TO MAKE SEPARATE TABLE FOR EACH FUNCTION , IS THERE ANY TABLE WHICH CAN BE USED FOR ALL FUNCTION

[@ShakehandwithLife]

For severity, occurrence, and detection, there is the requirement of a separate table for each, but according to function it depends upon the severity of the functional loss in the process due to any kind of failure

[@ashishkumbhar6667]

Please make a video on control plan

[@ShakehandwithLife]

Content is under preparation

[@vishwasjadhav5134]

As per standard RPN values in between or acceptance value of RPN

[@ShakehandwithLife]

👍

[@marotikendre5840]

Hii

[@akashrai1156]

Sir please provide full lecture of FMEA and ppap

[@ShakehandwithLife]

Under production, keep watching

[@tanuingle6857]

Sir can u pls explain the potential failure for lathe machine? CNC and drilling machine

[@ShakehandwithLife]

You need to discuss the operation of that machine

[@tanuingle6857]

@@ShakehandwithLife means can u pls explain

[@ShakehandwithLife]

Process of drilling of die

[@krishnasiddhartha9474]

how to decide S,O,D values after recommending actions

[@ShakehandwithLife]

Same way you can calculate the S, O, D values based on the table you prepared for the severity, occurrence, and detection of a failure,

[@singlewindow7515]

See my videos u will get correct answer

[@manideepkulukuri2496]

sir everything is good but why didn't your fill class column

[@ShakehandwithLife]

Classification depends upon the product.

[@ishantguleria870]

do u have any institute where u teach quality documentation ???

[@ShakehandwithLife]

Providing in-house at company sites and open house training when scheduled u may check www.shakehandwithlife.in

[@chetanpatil5875]

Where is the example of equipment FMEA?

[@Er.Yogesh74]

Sir can u share a ppt

[@ezhilarasansathiyamoorthi4731]

Thanks bro

[@ShakehandwithLife]

welcome keep watching

[@prabhatthakur7513]

sir is it necessary that recalculation of RPN should be under 100?

[@ShakehandwithLife]

Not necessary but try to reduce as much as possible

[@ezhilarasansathiyamoorthi4731]

Update six sigma green, block,yellow,blue belt video

[@ShakehandwithLife]

Sure, will do. Thanks for your valuable suggestion

[@RajuN-t7g]

Use clean fonts calibri ... it s difficult to read

[@ShakehandwithLife]

thanks for ur feedback

[@RaviKumar-rt5qr]

Vell explained

[@ShakehandwithLife]

Welcome

[@haripradeepr429]

more than add ..... more than 10 add *****of

[@ShakehandwithLife]

🤔

[@waysthe9661]

Hết hồn với bọn Ấn độ nói tiếng anh

[@ShakehandwithLife]

Please write in English

[@sajeevmangat]

bad pronouncing

[@ShakehandwithLife]

Ok