Failure To Extract On Glock Style Pistols, PSA Dagger and Micro Daggers

[@Shelfka]

Took me a trip to the range and stripping my C-1 slide down with someone much more knowledgeable than I to figure out this was my issue the other day. Thank you for getting the info out there for folks!

[@rejectcase8712]

Just got back from a range day and had this failure a number of times in each one of my mags so I'm gonna go try this out to see if this could be my issue.

[@Foxbodys4life]

Then next step in order would be to field strip/clean and oil inspecting the extractor for a broken tip. Sometimes there can be some metal shavings in the slide channels that can case these as well. Just giving you some extra pointers to check if you still have some problems.

[@rejectcase8712]

@@Foxbodys4life *hangs head in embarrassment* it was the right screw, it was a thread and a half too long. i tried to pull my extractor plunger out and it wouldn't budge until i loosened it. so i took a file too it and Bam. instant fix.

[@MirageTactics]

Great tip. Had to file the screw supplied by PSA and is now working

[@Samyouell11510]

How’s the micro running after till this time? I know the issue in the video is a common thing for 43x/dagger micro guns.

[@Foxbodys4life]

It’s been great since I switched over to 124gn and up. It’s my edc.

[@Smokinteesllc]

Solved my problem with my 407c on my dagger compact thank you so much

[@Texas4me08]

Experienced same issue. Thanks for your help. Any issue with slide not locking back on last round or with mag in?

[@Foxbodys4life]

I almost never have an issue with the slide not locking back. Just watch your grip, you might be riding the release.

[@m4oni]

my micro dagger still does it, even without a screw in the right hole. (failures to extract)

[@Foxbodys4life]

Contact customer service, they may ask to send it in. You can also try getting an oem Glock 43 extractor and see if that helps. But if it’s a C-1, they don’t like lighter loads, 124 and up works the best.

[@motorcitymadman146]

My dagger had this issue after installing the screws PSA gave me. I contacted PSA and they v told me to file some threads off. I asked them to send me the correct screw and they complied but we will see what i get. Does your saftey plunger have a hole in it? PSA told me it won't affect reliability refused to replace it. I purchased a glock factory one. PSA is shaking up the market but customers service is a bit shaky as well as QC

[@Foxbodys4life]

The only hole is the spring pocket, but I don’t see how any hole in the plunger would cause any problems. As for the screws, you may still need to file off some depending on what they send.

[@motorcitymadman146]

@@Foxbodys4life the hole is in the safety plunger that blocks the firing pin not any part of the ejector operation

[@motorcitymadman146]

@@Foxbodys4life PSA said their Engineers are working on the issue. Its obviously a manufacturing /Quality control issue. As for it not causing problems. I can make your trigger drag as it moves over the imperfection in the safety plunger. You cant polish a hole out. I just bought a Glock one and replaced. If you bought a new safety plunger and it had a hole in it would you not want it replaced with one that is perfect?

[@Foxbodys4life]

@motorcitymadman146 must have been a bad batch, none of mine have a hole other than the spring pocket.

[@So-eg3to]

So are the optic holes drilled all the way through ? How are the screws interfering

[@Foxbodys4life]

On the right side yes, you can see the plunger when the plate or optic is removed.

[@Natezoinks]

Excellent info, thank you!

[@alxzymers5986]

oh i just shot my Dagger in half for ejecting a casing perfectly behind my eye pro. i shot it while saying “MY SIG would NEVER“ and has never has 😊

[@ARP_king5.56]

Bro your screen is not on the right size but great explanation thanks having same issue

[@Foxbodys4life]

lol I was playing around with the Ray Ban Metas. They don’t record vertically.

[@ARP_king5.56]

@@Foxbodys4life oh i got you , i think you can adjust the size here in settings somewhere , but I wanted to see closer , im having a issue not sure if ejecting or ectracting i have to pay close attention to the videos , seen some people change guide rod and spring and extractor n ejector

[@Foxbodys4life]

@ARP_king5.56 this is the most common, but sometimes a new Glock extractor does the trick.

[@ARP_king5.56]

@@Foxbodys4life yea fam ima sub to your channel