Falcon BMS 4.37 Tutorial - Ramp Start

[@fisgasfighties]

On the JHMCS alignment process you must be on NAV mode, the page won't work if you're on A-G mode for example.

[@2BachShakur]

These are probably the best tutorials for BMS on YT. Can you do one on the mission editor/tactical engagements?

[@fisgasfighties]

@@2BachShakur thank you for your kind words and for the idea! I'm not very good with creating missions in the tactical engagements, but I'll try to study it more to make a tutorial about it.

[@mukshagames]

أنت رائع يا صديقي. شكرًا لك. شاهدت فقط من باب الفضول ولكن بعد الشرح يجب الاشتراك.. وأنا في انتظار المزيد

[@fisgasfighties]

@@mukshagames I Google translated your comment, thank you for your kind words!

[@mukshagames]

@@fisgasfighties Thank you also waiting for more

[@fisgasfighties]

@@mukshagames hopefully I'll have a new one ready in a few days

[@mykey39]

Really liking your tutorials! Keep them coming!

[@fisgasfighties]

@@mykey39 thank you for watching!

[@CTFlyer7]

What happened to anti-aliasing?

[@fisgasfighties]

@@CTFlyer7 what do you mean?

[@CTFlyer7]

There's no anti-aliasing here? Jagged edges.

[@fisgasfighties]

@@CTFlyer7 there might not be, I have to check my settings.

[@yungtwiz]

Any idea why my HMCS wont turn on no matter what I do? My knob is fully clockwise and I've tried just about everything. Do I need to be airborne?

[@fisgasfighties]

@@yungtwiz it should work on the ground as well. Are you using a shortcut to activate it?

[@kevinbryan1187]

I follow you and did step by step but I get EQUIP HOT? AC is ON...? what am I doing wrong?

[@fisgasfighties]

@@kevinbryan1187 did you set the air source to norm before starting the engine?

[@kevinbryan1187]

@@fisgasfighties I will double check...How can I move the Arm rest to see? also I run TWO monitors not sure how to see your videos and PAUSE while I start plane like you do

[@kevinbryan1187]

That is the issue...Arm rest for me hampers my view...So Once I get to NORM on airsource and then Oxygen ON I should be good

[@fisgasfighties]

@@kevinbryan1187 good to know it's resolved!

[@andrewa837]

Great tutorial. Is there any disadvantage to turning on all the hardpoints/avionics and CMDS switches before/during JFS?

[@fisgasfighties]

@@andrewa837 thank you! I heard that there is a possibility of having problems due to electrical spikes as the engine starts. I never put that to the test myself so I'm not sure how often this occurs.

[@carderetoasecas88]

I have a silly question, Is there any way to look around in 3d without head tracking? i can't find any binding/axis

[@fisgasfighties]

@@carderetoasecas88 press and hold the right mouse button, then move the mouse around. When I make tutoriais I don't have any head tracking activated and this is the method I use.

[@barriefrench3371]

I am seriously contemplating picking this up...see i am getting an itch 😆 clear skies to you all

[@fisgasfighties]

@@barriefrench3371 I really think you should! Happy flying!

[@Privateer91]

Totally love your tutorials. Just one thing: at the end of the video, the master caution was still lit. Was it because the ejection seat wasn't armed?

[@fisgasfighties]

@@Privateer91 thank you! Yes that's why it was still on, I normally only arm it just before getting on the runway

[@Duvstep910]

can't wait to see the link 16 tutorial

[@fisgasfighties]

@@Duvstep910 it's on "to-do" list but I haven't used it often enough to be able to confidently do a tutorial about it right now, maybe in time. I can recommend a tutorial about it from @AviationPlus that's really good.

[@boysen01]

Really great tutorial, thanks for putting it together. I was kind of capable of ramp start in 4.36 but they added some steps since. This covered those perfectly ! Btw, do you know how to get rid of the blinking radar altimeter box in the HUD - or stop it blinking ?

[@fisgasfighties]

@@boysen01 thank you for the kind words! During the tutorial, when I'm activating the avionics, I put the radar altimeter on standby. Flip that switch to the top position to activate the radar altimeter, the blinking will stop and your altitude AGL will be shown there.

[@waffelsandwitch]

Fantastic content, hope you are panning a dynamic campaign guide...I hope:)

[@fisgasfighties]

@@waffelsandwitch thank you! Yes a guide on how the Dynamic Campaign works is something that I plan on doing in the future.

[@K.Marx48]

wtf does "NOT SOI" means on my left mfd?

[@fisgasfighties]

@@K.Marx48 it means that the MFD where that message is shown is not "Sensor Of Interest". So whatever inputs you do on the controls for the MFDs, use the cursor or the TMS buttons, won't be applied on whatever page is on that MFD. You can make it SOI by pressing DMS Aft/Down. Does that make sense?

[@K.Marx48]

@@fisgasfighties absolutely makes no sense

[@fisgasfighties]

@@K.Marx48 get on my discord and I'll try to explain it to you via DM discord.gg/btfUBPtu

[@K.Marx48]

@@fisgasfighties I mean the TMS is the cursor on the MFD to lock on targets right? It used to be the arrows on the keyboard in the older versions of falcon but now doesn't do anything anymore.

[@fisgasfighties]

@@K.Marx48 yes you use TMS Forward/Up to lock targets on the radar, or to do point tracks on the TGP, but only when they are Sensor Of Interest. You can see that they are because they have an outline around them and the other MFD will display the message that you were referring to.

[@akulaxbms1905]

which theater to get this Have Glass skin?

[@fisgasfighties]

@@akulaxbms1905 I'm using the default Korea theatre and that's a block 52

[@PablosCZ]

Aha, so they use millibars in Korea. My BMS ATC always gives me inHg. Guess I have to switch it somewhere in settings. 😅

[@fisgasfighties]

@@PablosCZ actually they have me the QNH in millibars because that's what I have configured in the config file. They will give you the measurement in whatever you have configured, I don't think it's down to whatever is in use in that location IRL.

[@youssefidbella5979]

thanks so much dude! please don't stop these tutorials you are doing them in a perfect way so easy to understand and learn, for example TFR I watched many videos I couldn't make it work correctly then I never use it but your thanks to your last video I'm working with it now easily. same thing with LGB I learned new stuff!!

[@fisgasfighties]

@@youssefidbella5979 thank you so much for your kind words! I'm glad the videos are useful, hearing that they helped someone who was struggling with a system or weapon is awesome!

[@carlopelzen6515]

Good and interesting tutorial, thanks!

[@fisgasfighties]

@@carlopelzen6515 thank you for watching!

[@Hardpawnimage10]

Did the update for the link 16 already come out? I still cant use the mids knob

[@fisgasfighties]

@@Hardpawnimage10 yes it came out on update 4. www.reddit.com/r/falconbms/s/IisOZnkaMT

[@Hardpawnimage10]

​@@fisgasfightiesOh cool, too bad there are no automatic updates in the launcher

[@fisgasfighties]

@@Hardpawnimage10 yeah you need to run the updater manually.

[@Hardpawnimage10]

​@@fisgasfightiesThanks, i did that but now my controls are reset and i dont have a backup, is this normal?

[@fisgasfighties]

@@Hardpawnimage10 unfortunately if you didn't save a backup the controls will revert back to the defaults