Fallout 76: Settings You Need to Change ASAP & Quick ini Fix for fps and Input Lag.

[@cycleboy8028]

They need to let us reset the "enter/exit Power Armor" to "P" so that the events that need us to "hold E" to activate don't have us pop out of our PA if it is interrupted.

[@user-xt6bf2dq8t]

You can change keybinds

[@Galactic-nq9yv]

I always thought voice control for people with mics would be cool, like you can just say "exit armour" or something and it'll exit.

[@13r12ad]

Not everyone plays on PC. Some people actually play on consoles.

[@Galactic-nq9yv]

@13r12ad Where's the need to bring that up though? Clearly this is a discussion for PC, this game was made originally made for PC and some people don't play console. Keep the chat fair brother

[@13r12ad]

​@@Galactic-nq9yvNowhere in the title does it say solely for PC players. Plus a lot of the settings he is showing are available for both.

[@ПавелВанин-ю9ж]

Keep in mind, that iPresentInterval=0 may cause you another problem. Indoors, while wearing PA, your character may sometime stop responding to move buttons and appear as stuck. The workaround usually involves turning headlight on \ off. This is due to framerate sometimes going haywire without lock and game engine tries to sync freezing your character.

[@AngryTurtle]

Good tip!

[@T-362]

Same issue may happen if you got too high FPS (more than 120, mostly happens in instance areas). Setting FPS cap for the game to 110 FPS helps (in your amd/nvidia soft).

[@ПавелВанин-ю9ж]

@@T-362 Good advice. As an "install driver only" guy, I keep forgetting you can cap FPS using gpu software.

[@xdarknbloodx9590]

OOOHHHH, that's explain a lot, everytime i'm indoor, get stuck in the middle of a giant mansion for nosense. I was thinking it may be a pebble that they forgot to remove.

[@Dazzxp]

@@T-362 Good idea i'll try that, i'll set the fps target to 97 to keep Gsync on as my monitor is 100Hz

[@FlowingAqua]

I didn't expect to learn anything from this video, but the grenade targeting and hud opacity were options that I had not considered changing regardless of knowing that they exist. Thanks!

[@shonstoowort9707]

Same here

[@BSEUNHIR]

Turtle, please do not suggest ipresentinterval 0 without limiting fps. On capable machines, this can easily lead to scenarios where framerates in interiors climb over 400 fps, making you immobile. It's important to limit the fps of the game for this reason. 120 at most. 90 for most people. 60 for budget gamers. Use settings in your GPU driver to limit the game's fps.

[@Roalethiago]

I was going to comment this, indoors i get over 300fps and get stuck when i forget to activate the msi afterburner.

[@viciousfish6145]

I agree, for me it was the first thing I did when I got the 3090, global settings limit to 144fps, but most people will not know this. he did however mention this in his earlier video from 2 years ago, where he shows you how to set it to 60fps. This is the setting that could prevent high end systems from destroying your graphics card in new world and other games without an internal limiter.

[@BlackDim100]

100% confirmed. Must limit FPS on decent to good machines first.

[@MacTaipan]

Why do high framerates make you immobile?

[@bacon098]

I have 30 fps with vsync and 40 without lol

[@DJ-cm3dp]

Another cool tweak if you add these lines to your fallout custom ini it will remove all delay when fast traveling, meaning you will not be frozen for a few seconds but able to move instantly. [Interface] fFadeToBlackFadeSeconds=0.2000 fMinSecondsForLoadFadeIn=0.3000

[@Eternitycrazy]

Thank you so much man, this irritates me so much and I didn't know it could be changed, I love you 🫶

[@Mmichaa87]

hmmm weird but still the same for me, i have custom ini, but adding these lines does nothing.

[@Eternitycrazy]

@@Mmichaa87 works for me man, did you really add it to custom.ini?

[@Mmichaa87]

@@Eternitycrazy Ahh i got it to work, since i have Windows store version of the game, for some reason its renamed to Project76, not Fallout76, so my ini file called "Fallout76Custom" had to be renamed to "Project76Custom" so its all good now

[@Swilleh]

Can confirm it works. Thanks man.

[@RdX66628]

for amd users, if your textures are somewhat a mess or you are clipping thru it. go to your adrenaline software and change the tessellation settings for fo76 to override application and test 2x , 4x and so on if it fixes it. I usually stay at 4x or 6x. hopefully it helps.

[@ozzzies1]

Ty for this

[@davidpiel2824]

Why Override application and not just setting it to use application? (I use AMD Optimized since day 1)

[@pokerusseller]

I've been playing fallout with input lag and just general lag for years now and could never figure it out till today. Thank you so much for this vid!

[@GrandTickler]

shadow distance to medium or low (and reduce actor fade) helps a lot with low FPS in places with lots of buildings. even if the gpu isnt even peaking. which is the main culprit of poor framerates

[@turbowtime9611]

I turned shadows off completely.

[@rudyregehr6231]

something to note about area looting: there are some occasions where the list of items you can take isn't complete. there are things missing. this seems to happen most at ghoul events (moonshine, guided meditation, etc.). i noticed it because at these events there was ammo i wasn't seeing in the area list but i could see it when looking at individual body inventory (even on one right next to the one i was doing area looting from). you can still get everything by using "take all" but sometimes i don't want to just take everything.

[@Sivarius]

Is there a way to increase the small yellow square that leads to my selected quest? Or maybe change the color to like pink or something? It blends in with yellow lights and stuff

[@GAMarine137]

BGS, please add an Auto Crit toggle. So we no longer need to press the space bar for autos.

[@turbowtime9611]

Reassign Jump to L-Alt and put something heavy on your spacebar

[@abaddon646]

Found even better way. Use power toys to change spacebar with any other key and assign that key as jump in game. You can keep using spacebar as jump and have other key pressed down 😊

[@turbowtime9611]

@@abaddon646 Thank you!

[@turbowtime9611]

@@abaddon646 I have a rock on my keyboard (F6) in hopes of it auto critting without pushing anything but everytime I push my spacebar for jumping, it messes it up, then I have to reset the rock.

[@frostydelusions3066]

Capped fps to 60 in Nvidia Control Panel and that cut out 99% of random crashes.

[@VoreoSabrae]

The save interval trick is also an honorable ini mention. I set that up to save nearly every minute simply because internets often unstable, got tired of actually lost progress. Also is there anything we can do about the "magic mirror" effect that happens with tree leaves.

[@paulbyrne6062]

Thanks Turtle I was very skeptical of an ini quick fix for more frames (there are no free lunches mentality) I tried it and the difference is enormous, its not just was the frame counter says, the smoothness, graphics quality and 3d immersion clearly took a significant step up.

[@sergtrufanov5565]

Borderless window is a must not only, because it have somewhat better perfomance, but...that you can close your frozen game without a problem! Its like 1 of 4 times i launch the game, it freezes before loging in and ctrl-alt-del doing nothing. It also can freeze sometimes after exiting the game. Have no problems during gameplay, only start or exit lol

[@okonkwojones]

Yeah saaaame, for awhile i had to alt tab, then hit windows key to pull up the start menu, log out and then log back in, but such a pain.

[@okonkwojones]

Also helps to let the tv pattern intro run for about 2 seconds before hitting space when you launch, and then another 2 when you get to the menu. For reason mashingtoo fast seems to cause that crash

[@blackthorn7298]

I didn't know about the grenade setting. It was driving me insane to manually reselect the head every time I hit a grenade in vats. Thanks for the tips!

[@Frantheman-ub5np]

I love VATS hitting grenades. Using the cross bow with explosive mod makes bigger splash damage. Enemies seem to dodge em too fast.

[@Deathwish777]

i did that and now while in power armor i cant move when looking down or while in a building. i get out of thew armor i can move just fine, so i have to set it back.

[@AngryTurtle]

it can happened when you fps goes too high, simple solution is setting fps cap to 120

[@johnmarks9287]

What would be the benefit of changing that ini file (10:05) on a machine like mine (Rog Strix i9 14900hx, 32gb ram, rtx 4080 12gb)?

[@okonkwojones]

Ty for doing this, I followed your old ini tweak video back in the day to make it run/look less garbo but got a new computer, so I really appreciate this update!

[@goesman81]

thanks for the video turtle, Iam running this fix since you first a video about custom inis, with windos 11 i have the unfortuanate Problem with encountering micro freezes ever few minutes (game freezes sound goes on, an after a few seconds game relaoads, graphics run super fast and i have to deal with everything that happend in the freezes) i found videos on YT that say it has to do with Multi core prozessors that go over quad core ( i have a 10 core), and disabling cores in Task manager should fix it, it improves the situation for me but dont fixes it. if you had a solution for it i would highly apreciate it, as especially running low health builds is a challange as proc perks like serendipity dont seam to work while in the freeze phase. PS: i send you a trade offer on your discord (as the dark poet) have a look at it would love to give something back for all the help you give us :)

[@IslarfPokemon]

Turning off camp weather, and changing world music to 1 was a big improvement for me

[@renanpereira1445]

what the world music does?

[@IslarfPokemon]

@@renanpereira1445 it's actually quite loud

[@renanpereira1445]

@@IslarfPokemon ooh now i get it. i thought it was setting related to the radios on the CAMP. Yeah, I turned the world music all the way.

[@lumberfoot_jpg]

Been playing for years and didn’t know about some of these settings! XD

[@ToirMD]

I did the ini change, and while it improved the smoothness of the game, it also increased the terrain I got hung up on. I had to constantly bring up my hotkey wheel and dismiss it, or I would be stuck on terrain inside buildings and sometimes outside in the main world. It's probably my particular hardware setup, but it's not an old computer by any means. I built it two years ago.

[@AngryTurtle]

what fps cap do you have setup?

[@ToirMD]

@AngryTurtle It doesn't say. I think that's because I'm running borderless window.

[@AngryTurtle]

@@ToirMD you need to set fps cap with your graphic card settings

[@ToirMD]

@@AngryTurtle DId that, it worked. I stopped sticking to everything. Thank you!

[@nsimmonds]

Aw man I was all set for the intro theme.

[@BongerZ013]

I'm only finding this video now. Thank you for the tips!

[@BLegit196]

Coming back to FO76 after years of suffering on 30fps console. Now on PC and the experience is waay better. Your videos have been really helpful for catching up. Thank you.

[@viciousfish6145]

So I had watched your earlier video (from 2 years ago maybe) saying to put "ipresentinterval 0" in the custom ini file, which I did. I still never got above 80fps., after watching this I searched for it and found it in the original ini file set to 1, I removed this and now get 144fps which is the limit I set in the nvidia control panel as a default (my monitor max fps). So it looks like it acts on the first mention of the variable, and not later ones. I had already disabled vsync and triple buffering globally in the nvidia control panel as my monitor is gsync compatible and never gets tearing. you may think that from 80fps to 144 would not be a great improvement, but it most definately is immediately noticeable, not so much the fps, but the response is so much sharper, and the lag is almost gone. Thank you for getting me to check my earlier changes. I did wonder why I only got 80fps max when both the cpu and gpu (3090) were running at most 30% utilised. I am still not getting much above 50% utilisation on an ultrawide 3840x1600 native resolution, but hey that's the fastest it will go, why render frames faster than you can display?

[@DaddadxGaming]

Thanks again for the tips, tried it and fps wise it's a huge improvement for me especially since i don't have a high spec pc. The change in jump key will take a while for me to get used to but i got killed a bunch of time because i cant jump during vats so it's still worth it. Gonna try this on my SD as well

[@kevinw.3330]

Question being visually ipaired how do these setting effect my game plat

[@AngryTurtle]

what is game plat 🤔

[@kevinw.3330]

@@AngryTurtle I ment to say game play

[@AngryTurtle]

@@kevinw.3330 that I don't know

[@ZanewhiteV]

Yeah with Hud opacity always have that thing way lower to have a better look at everything more and all i need is to barley visible to see my stuff

[@mattt233]

I also saw a post saying to turn off certain cores for the game. It virtually eliminated the stuttering and input lag.

[@chilliflake1122]

Thank you for your video, before that I played fallout 76 only 55fps and I think my laptop is not good enough, until I change that to 0 my fps come to 120fps what an amazing changes

[@risingg3169]

Thank you so much! The game is free for a few days I wanted to try it out and I got ~70 fps with a 4070ti and 7800x3d. Barely using 30% of GPU and 9% of cpu. Something had to wrong and thankfully just changing the 1 to 0 made all the difference I needed. Thank you once again

[@AngryTurtle]

if you will experience getting stuck in place for no reason you will need to set fps cap at 120

[@risingg3169]

@@AngryTurtle I have it capped already on 100fps but when I get hit sometimes even while moving I randomly just stop and start smashing the movement key just to try and move away lol is this normal?

[@NaqOnTwitch]

I cant find the ini file in my files. Only different configuration settings

[@NaqOnTwitch]

Edit: never found it but if you have a lower end pc, you can turn off grass rendering entirely. Helped get me to 60fps

[@Dazzxp]

Oh that's interesting about the options, advanced mods, that should make it easier to determine what's on the weapons and the grenade targeting as if you set something in VATS to head and it locks on a mine it will change back to torso so then you need to change back to head again and flicking the mouse wheel tend to over shoot what you are after. As for mouse well I use default because I have changed the sensitivity directly on my mouse from 2000dpi to 3500dpi, I think I need to turn off mouse acceleration in windows as I am suffering from sharp movement and over shooting, wish there was a an option for that in game as i like it in windows but it's a problem in game. I play the game from Microsoft store and have to use full screen as if you use borderless it half's your frame rate, from 100fps to 50fps which to me is unplayable.

[@VetriVade]

Wish console gamers had more settings to choose from

[@kuro_c137]

Unfortunately disabling presentinterval causes me an enormous amount of screen tearing when inside a building that no option or fps cap is able to solve

[@kuro_c137]

On another note, the shadow rendering distance is very very high even at low settings. I would advice you to try lowering that from the .ini file. Im currently testing with fShadowDistance=10000.0000 fDirShadowDistance=10000.0000 and the game seems to stutter less, but more importantly it takes less time to load other elements and structures. (note that standard values for low and ultra setting are 60k and 150k)

[@dluten100]

I found I had to limit my FPS in my GPU's software to match my refresh rate of my monitor. Otheriwase, when I'm in power armor and inside a building my charator locks up and won't move. Once I set my FPS to max of 144, it works fine.

[@FozzY__20]

Holy smokes! That's completely different game! Thank you a lot!

[@shakur0605]

First time install steamversion and in the .ini ipresent was 0 at default

[@AngryTurtle]

what's your pc?

[@thoriumgaming5356]

Wow the ini file modification is game changing. Thanks a lot, great advice!

[@timurdos]

Come on, it's a known fact the game runs like shit in borderless window compared to exclusive fullscreen. For mid-range PCs: Change graphic preset to medium (presets have some setting in them that can't be changed in *.ini). Set actor fade to max (so you can see enemies far away). Set shadows distance to lowest, they eat the most resources. iPreset to 0 like Turtle said (but limit fps for F76 in you GPU control, Bethesda games are tied to FPS, so if it's too high the game will go crazy) Set Fullscreen (not borderless, your FPS will drop significally, for me it was minus ~40 fps) The rest is up to you.

[@peterenis4752]

Ok.... but how to handle the the character not wanna move then at the indoor location?

[@AngryTurtle]

for most new graphics cards you can set fps cap and from the fact you're experiencing this issue In guessing you have new graphics card

[@Humpypants]

set your gpu's fps limit to your monitor's max refresh rate and you're good to go

[@Junkzillabox]

Most probably your framerate is too high.. cap it to like 120 fps in your graphics card setting and it should resolve that issue.

[@Master_Smurf]

well i did what you said and i have a super PC now my fps goes to 1590 FPS no the 0 is not a mistake. and the geme is freezing any way to set the FPS ?

[@AngryTurtle]

if you have nvidia you can set fps limit directly from card settings

[@monsterdream14]

Doesn’t the normal .ini resets after every update ? Shouldn’t you change those settings in custom ini ?

[@AngryTurtle]

it doesn't reset, custom ini at least in my case can't override the prefs ini

[@Retroprofrank]

mr turtle ,, this only removes the 60fps cap on game right?

[@AngryTurtle]

it also removes input lag, if you want 60fps setting fps limiter and removing vsync should give smoother experience

[@Retroprofrank]

@@AngryTurtle I remember many years ago I went into the I and I and took the cap frame rate off and it was the same thing by turning a number from 1 to 0 .. I did it however I figured afterwards that the monitor I was using was only maximum 60 fps .. and felt a little bit weird .. if this is a different line I should try it out thanks for the tip

[@Kid47483]

Thank you Mr 🐢, didn't notice there are so many new settings.

[@jeyjey2446]

After i changed the pref.ini, my character started to bug inside of buildings :( ...hes simply getting stuck to nothing

[@AngryTurtle]

what's your hardware?

[@drdodgemodz2277]

Cap your FPS to 140 or 135. Bethesda also copied this bug over from FO4

[@jeyjey2446]

@@AngryTurtle 4090 + i9 13900k...

[@jeyjey2446]

@@drdodgemodz2277 i tryd that, even if i feel stupid about having a 244hz screen and capping the frames so low.. But it didnt fix the Problem. Even tryd 60fps

[@loryt690]

Guys ask bethesda to add a fps limiter so we don t have to go in games files, and please ask also for a upscaler like fsr or dlss. This things are easy to implement features and will help every one a lot. Now I m talking to you Turtle, as content creator of this game you will have a huge impact on devs and on the comunity, ask for some good change with also the others content creators, I think the fps limiter is a base line till is a base setting in evry game now since 2017, upscale tecnologies will also be a great thing for everyone, for bust fps and for make possible play a lot of ppl that have old hardware. Thanks to everyone that will do any pressure on bethesda to actually care more this game

[@bacon098]

My #1 tip is to turn off grenade targeting. This applies to other things like creature eggs and such. It's one of the things that switches vats off of headshots, and as a gun fu vats spammer, it is very inconvenient.

[@sait6666]

Oh wow, I didn't know about the ipresent=0 trick .. what a difference!

[@jookeringa]

wow, I turned the ipresentInterval config off and now the game is running at 200+ fps... what config was that?!

Turns off vsync. It isn’t a good thing. Physics break after 144 fps. You should cap it at 144.

[@AngryTurtle]

it's very old vsync system

[@kreacher4728]

I target thowables to shoot at the feet of enemies.. no bouncing around.. almost like an impact grenade.

[@Dazzxp]

Hmm had to turn iPresentInterval=1 back on, at 0 it seems to turn off vsync and i am getting around 350-400fps and the game really doesn't like it, keep getting stuck

[@AngryTurtle]

what's your graphic card? for powerful pc setting up fps cap at like 120 fixes that

[@Dazzxp]

@@AngryTurtle RTX4070 Ti Super running at max setting 3440x1440 and a Ryzen 7 5800X3D Processor. I have decided to go with the FPS lock of 97fps as it's a 100Hz monitor so 120fps i will get screen tearing. Seems fine with that the graphics card is snoozing at 40% utilisation and base clocks so it only using around 80watts of power. I use MSI afterburner to monitor what's going on.

[@billy_cross]

Hard while it is annoying and it doesn’t take up a lot of pretty contrary to what you said it gives way more information. The regular hot doesn’t give you really any information except your health. I did learn from Beno that deal with the bad part out grenades in mine side didn’t know that it’s so annoying and freshly had some of theplants where all over the ground

[@sorciak]

highlight corpses is 1 of best options for me, is there mod for highling corpses for fallout 4 ?

[@stefani.5737]

Natively, no. Power armor and a variant of mentats highlights but only living creatures. Awkcr mod however allows you to mod eyeglaases to highlight corpses ( it also introduces more underarmor options and allows wearing armor pieces over most clothing. ARMORED BATHROBE HELL YEAAAAAH )

[@diminios]

Huh. I thought we had to lower overall graphics settings to low from the menu, and then manually increase all the settings to whatever we wanted (ultra for textures, etc.) for maximum effect.

[@Paul-ng4jx]

I’ve got the ROG Ally extreme edition I love the power of this thing

[@JStrength]

Was just watching a video on how to optimize my Xbox. Hope some of this works for us too!

[@michaelmott1498]

Link?

[@Dade13305]

No glowing bodies for immersion purposes.....but also no visible pip boy menu and power armor hud because screw immersion......👁️👄👁️

[@maryannemason10]

I love camera shake 😎 super immersive 😅 things get crazy 🤪

[@alexvillalobos8245]

what happened to audio?

[@peterturczi7601]

Turtle! Changing this setting (ipresent to 0) overheated my vga while playing fallout 76! My pc almost flew up! I changed it back to 1, and the problem was gone. I'm using a RTX2070 (i know its old, but not 10 years old) Thought U should know about it.

[@AngryTurtle]

what fps cap did you set?

[@peterturczi7601]

@@AngryTurtle I did not :D :D I see the problem now. Thanks! I should have read all the comments below...

[@jacobwilson7673]

Dude i was just about to ask how did you get specific numbers on stats from mods for your weapons! Thank you!

[@jacknorton3096]

Wtf the ini change is insane!!! Hard stuck at 55 fps now I’m over 200💀

[@Jacob1ill]

Still cant get rid of random stutters, and i think 90 percent of the player base has this problem, bethesdas old engine i guess. Never a problem on any other game!

[@maikhatespeople2138]

i play on a alienware laptop from 2013 , works like a charm

[@everybodyshouldenjoylife1234]

game is very laggy on ps4 slim, no solution? or buy a ps5?

[@The_Watcher_0127]

great video, tho iPresentInterval was already 0 for me, even tho I never changed it

[@LeonScottKennedy7]

I found an angry turtle today and I thought about this channel

[@broncfreak5210]

the reason for bethesda locking fps is because if you run more than about 200 fps the game grenades and you cant move when in an instanced zone. dont get me wrong i still unlocked it but i had to manually set the max fps in control panel manually.to 175 and im sure bethesda is locking it to be safe. however i feel they should lock it at a higher fps that 60. even 120 would be good for majority of players

[@KurtacusRex]

@angryturtle Love your videos, but for content like this I cannot follow your advice with my add and limited monitors. EVERY. step I have to pause, alt tab, find in the game, tab back because I forgot, etc. PLEASE FOR ACCESSABILITY SAKE PUT A WRITTEN LIST OF SETTINGS IN YOUR DISC IR COMMENTS. IL watch the video, get the list on screen, and them adjust. 100x easier for your viewers than this rambling tab nightmare you are subjecting to me sir. Mad respect for your presentation and knowledge, but THIS. SHIT. NEEDS. A. WRITTEN. LIST.

[@skullsnbones5285]

is the leveling system broken or what! It appears to take longer to level up, highly noticeable near the last 1000 xp before leveling, it takes forever even using relish, tone, sleep, brainbombs! what gives!?😕

[@cartridgepad]

still no settings for the actual server youre on.

[@Drogbeorn]

My computer barely plays the game. Low and everything off except subtitles

[@WyattsVlog]

How to get more than 60fps?

[@timurdos]

what GPU do you have?

[@808gamerhawaii]

Welp after changing the ini setting i was rewarded with having my pc crash every time I open the game...even after changing the settings...thanks for that

[@AngryTurtle]

maybe your fps goes too high did you try a limit in your graphics card settings?

[@808gamerhawaii]

@@AngryTurtle I did, idk I had to change around the fullscreen and reset the present settings within the ini to be able to start it back up. cant play the game in fullscreen without it crashing again but im sure if do a full reinstall would fix it

[@butterpants5711]

Full screen works way better for me went from 60-50 fos to 120 FPS. My pc is 6 years old maybe thats why? Try that guys.

[@seccosec]

“Unless you’re experiencing crashes”…………… Myeah just every single time…😂😂😂

[@TheSeanyJC]

Borderless n windowed cap my frame rate to 55 in fullscreen I goes to 165fps

[@shubhamgoyal4325]

No field of view setting on ps5😢

[@tit4nu]

Enter game, set Windowed Borderless, exit game, set iPresentInterval=0 in the ini file, open Nvidia Control Panel, manage 3d settings, program settings, select fo76(if it's not present in the list add it), set max frame rate to 120 OR lower depending on your PC. Enjoy.

[@Jun1oR1101]

And make the .ini file READ only when you're done adjusting it!

[@VORASTRA]

There's no point. The game won't change anything in there unless you specifically go in settings and try to change something, and all of this will reset once you restart the game because you set the files read only. I keep mine unchecked, and iPresentInterval is still 0 unless I change graphics settings.

[@Seven_Actual]

Unlocking frames break the game assuming you have a decent video card. Interesting note on Linux the game runs at your screens refresh rate. Flawless. On Linux I run 165fps with zero issues. On Windows I have to limit frames to 80fps or movement breaks in interiors.

[@AngryTurtle]

Fallout works on linux 😳

[@Seven_Actual]

@@AngryTurtle Yes. Since Steamdeck. Most games do.

[@philistine3260]

I'm on widows, I only get stuck in interiors with over 200fps. Capped it to 160fps and been perfectly fine

[@Thecalsone]

Can you fight CrazyRussianHacker on a fist fight?

[@VORASTRA]

I'm still surprised "advanced mod description" is even a setting. It should be always on, it shouldn't be it's own .ini variable. Just show all the info for everyone by default. Interesting info about fullscreen. It is dx11 game, not dx12, it should work better with fullscreen and other people are also claiming they have better performance in fullscreen. You just skipped over shadow distance? It is the most intence graphics setting there.

[@Achrom1337]

Very Helpful !

[@pablitro2001]

The ini fix is one for character, or the change is for all of them?

[@AngryTurtle]

for all

[@garrettfarnam4567]

Anyone else get increased lag after changing the ipreset setting?

[@dannytaylor50]

Turtle please help me with my fixer build I’m not seeing the number that I should

[@Jingejj]

Awesome, thanks!

[@Moosemanity]

thank you you are a Legend

[@NekoLoliChan]

Please make a video about how to edit the file for camera to fit in tiny places and out of radius , i dont have steam version yet but i want to edit that when i get it

[@lolwtfldr3]

Thank you!

[@OhioCarl]

I was disappointed to find my ipresent was already set to 0. However I bet my laptop still needs switched.

[@Eternally_Ninja]

First message was deleted for some reason... try lowering shadow draw distance in preferences.ini I doubt you notice shadows 10,000ft away nevermind 90k and its a huge performance boost. fShadowDistance=90000.0000 fDirShadowDistance=90000.0000

[@viciousfish6145]

Make sure it is only present in the file ONCE. I had 2 lines, one said 1 and the other said 0, I deleted the line that set it to 1 and hey presto, it worked, however this does depend on your graphics chip, laptops have slow graphics chips due to heat dissipation and battery issues. you are better off with a desktop. Most laptops are aimed at buisness users who never need to use 3d.

[@vhaossa3486]

No more custom .ini or Nvidia tweaks needed? Should we undo them if we followed your previous video for this?

[@AngryTurtle]

it's still good to do all of those to further improve the game, the one I showed here is just the most important of them all

[@Giedrius_Savickas]

Settings changed in ini files are separate and invisible from ingame settings menu. Ingame you don't have as much power as in ini files.

[@GrandTickler]

id force vsync off in nvidia control panel (if youre used to having it on) besides doing the ini tweak in this video, then use rivatuner with scanline sync of MINUS 180 (-180) to force the screen tear line as far as possible to the bottom or top of the screen rather than the middle. u may need to change this number to get better results for yourself though, but as long it can maintain 60fps it should be good. u can leave the fps cap alone since scanline sync will automatically cap your framerate to your monitor HZ. this will give you all the benefits of fast responsive mouse and good framepacing, with as little as screentearing as possible

[@donovanattano3898]

mine dont say ini -.-

[@AngryTurtle]

it's just hidden file extension is always there

[@13attman]

you should try and get a 2nd mic for your new setup the audio quality is noticeably lower

[@philt4346]

top Turtle tips, ta!

[@victorsimo5454]

Thanks !