Fanhome Build the Knight Rider KITT - Stages 47-50 - The Dashboard Electrics

[@WorldofWayneUK]

If you enjoyed this video or some of my other content please consider pressing the SUBSCRIBE button and hitting the BELL next to it so you get notified when I release a new video. You will find all the links and information you want in the expanded video description. If you have any questions or comments please leave them below. You can also see my behind the scenes video logs on my Patreon at www.patreon.com/worldofwayne

[@davidspencer8373]

Like video

[@robertkeatings9480]

Hi Wayne can I have sages for batmobile up 27 so far need more cheers

[@1975aeiou]

I just finished stage 48, and I am quitting for the day. Will tackle 49 and 50 tomorrow morning. I might have already said this, but I’ll say it again, that I would be completely lost on this build without your videos. They help so many times to make sense of what the booklets depict.

[@rickgregory9616]

So once again, we have to remove that which we assembled to install that which could have been installed when we were at that stage. Oh, well... GREAT video! I enjoy stages that take a long time to assemble. Makes you feel like you've done something. BUT you have more will power than I have! I would reconnect the wires to the board just to make sure they all work (again) - and to see what it looks like!

[@ZenStudiosCO]

I think it’s a lesser evil. I would rather plug in all the electrics and test them all to know they work before installing them elsewhere in the model. It’s a bit of a pain but I’d rather feel that pain now and know everything is working rather than have to tear it apart later. Just my two cents

[@stevenwheaton874]

Lots of wiring work there but, I'm going to be thrilled to see all that working. Thanks for sharing this with us Wayne. See you next time.

[@TheAquabears]

That box you installed at 14:34 is a tiny little replica of the special effects control circuitry box for the scanner light, as installed by Universal on all the TV prop cars.

[@WorldofWayneUK]

😮

[@TheAquabears]

​@@WorldofWayneUK visit The Knight Rider Historians youtube channel sometime and have a poke through their videos. They own a lot of screen-used pieces from the show such as electronics (including several versions of that control box), complete cars and the FLAG semi trailer (currently being restored).

[@rangeroverl322]

That was pretty tough. Their magazine photos aren't the best . Thank god we have your videos for support/instruction 👍👍

[@procta2343]

one hell of a stage that! you have a lot of patience, but then again i think this sort of thing is supposed to be relaxing if i am right.

[@Duane.McFarlane]

I received and build this pack yesterday and I had to plug them back in to see what it looked like and I can confirm it is amazing but some upgrades would make it look even better, like the voice box doesn't flash when he talks and one of the screens looks crap but ive heard that model modz are working on a screen upgrade, apart from that it's amazing

[@milanondrak5564]

Goth car is coming on nicely. The use of resin in electrical components is a process known as potting.

[@sprueVerse]

I’ve always loved this car! You have the patience of a saint!

[@WillsWorkshop]

Great video Wayne thought it was going to be a simple set of stages at first but took about 2+ hours for me to do, surprisingly I managed to get the footage down to a 30 minute video 👍

[@RiksModellbau]

Oh, there is a cable.. oh, another one...a cable...looks like 100 cables 😮 You've done a good job 👍😊

[@edwardbellamy5154]

excellent build once again Wayne

[@williamtrask1582]

hey wayne i like your ending all the diffence sci-fi crafts

[@fatdan120a]

cant wait too see finished result, love the content Wayne :)

[@sheldonlee9440]

Great as always, I can't wait till I'm this far into it.

[@spidersprue]

Now I doing these builds it is one of my pet hates to fix something and then later take them out however I am enjoying the build great video as always JP Ps then take them all out for the dash mod 🤣🤣🤣

[@andrewparkinson8244]

@WorldofWayneUK I have noticed when connecting scanner labeled A to the circuit connector A with all the others connected the scanner doesnt work at all .yet if i move it to the connector next to B it does work all the time until i turn it off

[@ccllvn]

hi I am watching from Germany

[@ziggythedrummer]

Just rewatching this one as I'm nearly at that stage now, just had 35-38. Noticed you used resin to secure the LEDs into the lower dash console - but doesn't that part get replaced with Mike Lane's monitors mod?

[@blackpanther696936]

Only if you get the mod

[@Theelectroasd]

Well Done for this great video and also for your channel! I am having a small question. Since those models , like KITT, needs so much time to finish, where exactly do you store them in order to protect until they finished and probably added them in a case? Do you have any tip on this ?

[@WorldofWayneUK]

I buy large plastic containers and keep them stacked in those. One container per build

[@Theelectroasd]

@@WorldofWayneUK Thank you very much for your reply! 🙂

[@punchy72]

I did consider buying this but now I’ve seen what’s involved, glad I didn’t. There’s a lot to do and would be quite tricky. Good job though!

[@silverscreenreviews8521]

Wayne, my cable F doesn’t light up… Iv ordered a new one, that doesn’t either… does yours light up now? Or will it light up at a later stage maybe.? Or any ideas? It’s plug is the biggest on the board so I haven’t put it in the wrong place.

[@WorldofWayneUK]

Mine works

[@silverscreenreviews8521]

@@WorldofWayneUK 🤔 hmm

[@dennisschodeberg6671]

OMG this is just a test to see how much wires we can deal with.

[@eddywells5689]

Great vid 🍺🍺💞💞🙏🙏👍🐕🐕🇦🇺🇦🇺

[@angelamoore8685]

Hi there Mrs angela moore Where did you get kitt the Knight rider build?

[@WorldofWayneUK]

Fanhome.com

[@paulwilcox9919]

Can you send a link for where to get the resin and UV Light. Thanks. These videos are very helpful...

[@WorldofWayneUK]

It’s in my Amazon store. Link is www.linktr.ee/worldofwayne

[@markk3140]

Hi Wayne brilliant video helped alot were did you get the uv light from thanks been looking for one for along time

[@WorldofWayneUK]

Amazon. I think it may be in my store

[@blackpanther696936]

I have one question. How does the brake pedal work if when pushed down it goes away from the switch?

[@WorldofWayneUK]

The switch is behind it. As you push it down the lug pushes down I to the switch

[@junerusty2854]

Brilliant

[@jameshebert5430]

👍👍

[@paulwilcox9919]

Sorry for posting here. Are you gonna build The Tumbler from Hachette ?

[@WorldofWayneUK]

Yep. I am building it

[@mackenzie_frenzy6933]

hey Wayne I've got a question for you. what is the name of the company who is doing the eagle moss builds that people have started. I need it to finish Eleanor and ecto1. Thanks again and the car looks great.

[@WorldofWayneUK]

IXO we will have news on how to continue before the end of the month I think

[@mackenzie_frenzy6933]

@@WorldofWayneUK thank you Wayne and have a great weekend. the bus is looking amazing

[@waynekbond007]

Hi, Wayne is there an issue with circuit board as you know of ?

[@WorldofWayneUK]

None that I have heard. I have heard you need a good new set of AAA batteries or funky things start happening

[@waynekbond007]

@@WorldofWayneUK yip you defo need them been through 3 sets already......OK I like playin with it lol scanner stopped working rang them they said yes there is an issue with some of the boards they'll send out a new one so my build has stopped til that arrives lol

[@rickgregory9616]

@@waynekbond007 If you install Model-Modz Power Mod, you won't have battery issues

[@waynekbond007]

@@rickgregory9616 that doesn't resolve the problem buddy

[@rickgregory9616]

@@waynekbond007 Yes, I see. It appears to be a problem with the boards. I thought it was battery-drain. Sorry you're having problems. Hope this is resolved for you quickly.

[@robertmyers8352]

How many issues are actually in the KITT build?

[@WorldofWayneUK]

110

[@robertmyers8352]

@@WorldofWayneUK Thank you good sir 👍

[@davidspencer8373]

Like video

[@migustoes23]

Hi sir I'm a bug fan I watch all ur videos.. I have a ?? For you. Do u have the detention of the case for this car and the fast and furious car...?? Thanks

[@WorldofWayneUK]

No. Next stages should be out the week

[@ziggythedrummer]

You know how 80s this car is when you see that the small piece (50B) is a rear ashtray 🤣

[@dogwalker666]

Looks great but at £1,100 it's way too expensive.

[@williamtrask1582]

except for that wire that look like it pinch watch out

[@pooluop]

just put my subscription on hold for 3 months so Stages 47-50 will be 3 months late as christmas is upon us. financially budget is just not a good time

[@silverscreenreviews8521]

How many people here in the uK have the ‘Knight industries’ writing on their steering wheel? Mine hasn’t :/

[@WorldofWayneUK]

I need to check mine

[@Andys-qs1uv]

Dont wanna know what the back of the dashboard of the original car looks like with all those wires🤣🤣

[@frederiqueheremans6119]

check this out bro to make it more realistic

[@barrywhitlock141]

This is a fiddly issue. but I am looking forward to receiving my pack and I will be extra careful with the wires

[@fipsassmussen1046]

if i buy the parts in shop stay it at every 14 day 1 exemplare ? all 110 parts ??? than i need over 4 years to get the modell done.. thats absurd ! fanhome can me give no answer they say can only say about online abonnement something.. lol

[@WorldofWayneUK]

It’s not available in stores. If it was it would be weekly so 110 weeks. 2 years

[@colossalgambit70]

Umm, Wayne,, that's not an engine, just saying