Farmall Super C Implements on the Farm

Farmall Super C Implements on the Farm. Antique farm tractor in operation on the farm. Old farm tractor in operation on the farm. #farmallfanatic #antiquetractors #farmall

[@earlschultz7880]

thanks for this video, I just got my C going and it is good to see you explain how to use it. I am 71 and just learning... was a city slicker most of my life and love using these old red tractors!

[@FarmallFanatic]

Just be careful on hill slopes

[@AaricHale]

Your going to have a good time playing with all your new toys ! I agree with you if you plan on keeping the disc might as well go through it and do it right . It looked good behind it . I hope you have a great evening !

[@retiredispose8980]

One of our first tractors , when Dad bought our small farm in 1964 was a Super C. It was set up like yours and we ended up with the same plow, same disc same sickel bar mower but we got one extra a two-row fast hitch corn planter. I spent many hours working with that little tractor and the small equipment. We only had 93 acres so it wasn't like we needed bigger stuff. Really was a good setup.

[@chadstrutzenberg9171]

Thanks for the dose of super C!

[@goodrichfarms8795]

Did your implement seller, Elwood have a black & white suit on, drive a Retired police Dodge Monaco, sing the blues and have brother name Jake ? 🤣🤣... Great video FF, The Super C will look great on those new pieces of equipment!

[@FarmallFanatic]

That's what I asked him.. I'm waiting for an answer ahahahahahahaha

[@goodrichfarms8795]

@@FarmallFanatic 🤣🤣

[@guydaubenspeck9206]

When you get that apart Mr fanatic you will find that the spool that matches that pillow block has rings cast in it and they will pretty much hold the dirt out. I have a 9A here that my granddad bought new probably in the late 50s or early 60s it has always been kept in except at peak times in the spring and then when we were planning wheat in the fall we used that as our main disc here till about 10 years ago and we bought the McCormick tractor and we needed a bigger disc to cover the wheels on it and I kept a 9A and I still use it in my knowledge I do not believe that we have ever replaced a pillow block or a spool on that one and we had one here we got from the neighbor it was a transport as opposed to the drag and I replaced one in it because they had broken it but I think this one that we bought new originally has never ever had a pillow block or a spool replaced. That disc covered probably 30 to 40 acres of corn and small grain ground a year here for all those years and then went off the farm a little bit here and there for custom work it didn't do too much with it because you had to load it on a hay wagon to move it. I have a nearly new woods here now transport with big 22-in blades notched in the front smoothed in the back and we do our main amount of disc in with it but it is more of a cutting disc in the finishing disc if I want a nice finish anywhere I'm sitting down or something like that I either use the disc then the s time harrow then the car washer or somewhere in there after the heavy disc I'll go in with the light one if I'm looking at like somewhere I'm sitting down or something I want to smooth but like I say that 9:00 a.m. I don't think that we have ever replaced a pillow block or a spool keep it greased takes lots of Grease but it really work well it's much more efficient and easy to work on too then the newer style because the newer ones you have to take your displays all apart to get the bearing these you just drop the pillow block and pull them apart

[@FarmallFanatic]

Yeah it won't be bad changing these bearings

[@TAHDAHFarm]

You will be glad you put new blades on if you go to all the trouble of taking it apart. I like the idea of the barn being open on both ends. If you need to, you can always hang a tarp up.

[@FarmallFanatic]

It's so convenient to be able to drive-in and drive out

[@bobpaterson1845]

Really good collection of implements your puttin together there 💪 roll on spring time 👍💥🏴󠁧󠁢󠁳󠁣󠁴󠁿

[@FarmallFanatic]

You know it 👍

[@davebruins8623]

I just love the look and sound of these classic tractors.....thanks for keeping them going.

[@nathanalmond8280]

Nice. You will enjoy your equipment for the super C. I have the quick hitch equipment for my 140 and I enjoy using it for the gardens.

[@bobkinney7913]

Probably the most versatile tractor of all time

[@FarmallFanatic]

I agree

[@taylorpillow5603]

I used to have a scoop for my Ford wd. I used it for digging trenches and smoothing out my drive way.

[@johnnycampbell5234]

Cool, new toys! Absolutely love the C, just located one up the street from me, it’s in its working clothes but it runs drives and has decent rubber for 1700 American, should I pull the trigger?

[@AllisChalmersMN]

Do it!

[@FarmallFanatic]

Yes

[@MarkWYoung-ky4uc]

Congratulations on finding that much fast hitch equipment this quick FF! My experience is that GOOD 1 point implements are getting very scarce can't say about 2 point. I'm with you on leaving both ends of the shed open. In your case, you can pull tractors in from both directions. If you only had 2-3 tractors, you could park them in one end and implements, trailers ect. in the other and not have to move tractors out to hook to them. By the way, I filled up my touch control with the old HyTran and it works great! Thanks for your help!

[@FarmallFanatic]

I found some too, and that's what I added to my hydrotuch loader tractor 👍

[@MarkWYoung-ky4uc]

@@FarmallFanatic HyTran is just like Farmalls...it gets better with age...😁

[@FarmallFanatic]

And Wine 🍷 ahahahahahahaha 🤣

[@leonardgordon1748]

It’s always interesting to find out what new toys you got for your boys. 🚀

[@dehavenfamilyfarm]

Nice collection of implements!

[@mikekorth1733]

Really like the way the C sounds well all of them really, can't wait to hear you putting them to work.

[@FarmallFanatic]

Me too 👍

[@PaulOtis]

always good to get more toys! Now you have to doll them all up!

[@americanaxetoolco2076]

Nice set of toys! Make a great produce farming tool! Set a cultivators and you’re in business

[@FarmallFanatic]

No doubt... This will make a great food plot tractor for deer hunting

[@americanaxetoolco2076]

@@FarmallFanatic hell yes it will!

[@christopherbrosz5003]

Congrats on the toys. Tractor does you no good of you don't use it. Those old Farmalls are happiest when they are working.

[@FarmallFanatic]

I agree

[@randallstewart8487]

That leveling link works when you make the second pass your right tire drops down in the furrow from the previous pass and tractor now is unlevel with rear plow higher than the front,the leveling link tilts plow so both are level and at equal depth!

[@FarmallFanatic]

Right on

[@salchicharey]

I have the 2 point scoop as well and my research showed that they were made for the 300 with 3" points. Mine were cut down to 2.5" and the reshaping was done well. Maybe yours is different. I am sure you know by now but the axle clamp is where you hook up the trip mechanism for the sickle mower.

[@FarmallFanatic]

Yep 👍

[@henryofskalitz2228]

I wish the fast hitch took over instead of the 3 point so much easier too hook up and take off

[@FarmallFanatic]

John Deere wanted to purchase the rights to it...IH said no...dummies

[@tbishop6726]

Yup it was one of IHs bad decisions not allowing the use of the fast hitch

[@henryofskalitz2228]

@@tbishop6726 it was superior to the 3 point in many ways, lighter implements and less engineering needed for them, less materials used, easy attach and disconnect, and many many more. The only 3 point style i like is the oliver 1650s with the fast attach bottom 2 points

[@johnnycampbell5234]

Couldn’t haul all that in the Ranger FF? Had to have a Dodge deliver it??🤣🤣🤣 just poking fun, I like Ford trucks too

[@jamesmorrison1884]

Nice implements I dont think that bearing would be open on top my opinion. Thanks the video have a good night.

[@FarmallFanatic]

I'm gonna get at least 4 or 5 and change them out

[@jamesmorrison1884]

@@FarmallFanatic Can you still get them?

[@casedoumasr656]

Back in the day we had Farmall 100 with bolt on sickle mower .and my bother had Ferguson T 30 and a 3 point mower and his plugged up alot and I with the Farmall did circles around him 🤗🇺🇸💣

[@ihus9950]

There you go👍

[@johnnycampbell5234]

You got your grease in my dirt! No you got your dirt in my grease! 🤣

[@FarmallFanatic]

You caught that

[@lynnhavenfarm8514]

Got an auction possibly the 13th. I'm hoping to get to it and hopefully get some more implements

[@FarmallFanatic]

Do you know what they are selling yet?

[@lynnhavenfarm8514]

I'll be going up that way to the wrecking yard this weekend and I'll stop by and look around. Might video it if theres intrest in it

[@lynnhavenfarm8514]

You would have a field day exploring a place near me, theres acres of equipment

[@tommys_trucks_trains_tractors]

I had a Cub hauled here 3-4 years ago from CT by U-Ship

[@FarmallFanatic]

Nice

[@gusthefarmer5608]

I have one of those earth scoops that is 3 point mounted and it sure works great for filling very large holes in a road

[@FarmallFanatic]

Yeah when the weather is better I'm going to mess around with it a little bit

[@paulpochan9631]

That's a "Tumble Bug" on a fast hitch ...yes, check out Squatch 253....he moved a lot of dirt with his pull type. Up, Down, All Around(from "Ups and Downs" by Paul Revere and The Raiders)........

[@FarmallFanatic]

Then what? Drink Brim?

[@paulpochan9631]

Yep while you're watching 253...fill it to the rim....."Are they real....no they're Memorex..."

[@hturbo1007]

Farmall, that's called a tumble bucket. Squatch does have a pull type version.

[@FarmallFanatic]

I've never used one

[@hturbo1007]

@@FarmallFanatic I've never used one either. But Squatch does have a video of him using his pull type version with his super M last spring leveling a pad for his future building.

[@FarmallFanatic]

@@hturbo1007 Yeah I'm gonna go watch that

[@seniorelectrician6831]

I see you were catching up on old comments Yes Squatch has a tumblebug, you can do leveling or cutting with it.

[@FarmallFanatic]

Ahahahahahahaha 🤣 yea I was

[@brokenwrench1]

the one sqautch pulls is a rolling tumblebug you load it and then trip it and it rolls to empty these were originally made to pull with a team of horses.. the plow has high speed mowboards and sharpenable shares dad took ours to a blqacksmith and when they needed it they were repointed.. a good amish blacksmith can restore these. when they get worn down you have them hard surfaced black smihed welded. the disc. is supposed to have a slightly smaller rear outer blade which is a furrow coverer.. when i worked for the iH dealer i assemkbled 370 ans 470 models from a bundle of frame parts , a stack of blades and a crate of hardware. we tightened thr gangs with a sledge hammer rail road wrench. thye dealer had the entire set.

[@oliviahentges2890]

Nice bunch of implements! I have a request of you. Could you please shown in detail hooking up the sickle mower? I have one and tried it on my 460 farmall and can't get the sickle bar to lift up. I saw that bracket you have. Is it for the mower? I don't have any brackets so if you could help me I would sure appreciate it.

[@FarmallFanatic]

Absolutely

[@johngoodwin8889]

Thats a tumblebug that is used for moving dirt like and modern earthmover or pan scraper

[@Wilber-vm1dy]

How many acres do you have in crops

[@FarmallFanatic]

140

[@williamsnipes7608]

That cycle bar mower will be nice. Put a handle on that disc blade and you'll have a battle axe.

[@KampsKorner]

Man now that I see all the toys, I want something with a fast hitch. Either a super c or a 200

[@FarmallFanatic]

most definitely

[@henryofskalitz2228]

Get a 450 all the power you need and then some

[@tomyoung8719]

Is there room for a Cub Lowboy in that stable?

[@FarmallFanatic]

Man it's tight now lol

[@jeffscott811]

Your correct he has a tumble bug scraper

[@jameskropf2493]

I'm puzzled on the type of muffler you have on your 400. Is that a John Deere muffler?

[@FarmallFanatic]

Universal

[@richardwilkens4577]

Looks like the C is going to have plenty of work to do

[@jameskropf2493]

If it works, it works. I've just never seen an oval muffler on a 400. The pipe looks narrower too.

[@FarmallFanatic]

It wasn't one I preferred it was a universal and that was the only 1 the parts store had at the time so i said screw it

[@tenpennyfarm1373]

I have a farmall 300 that I am working on and was wondering what is the best oil that you recommend for the rear end and gears?

[@FarmallFanatic]

This is one corner I cut. Buy TSC 85w90 and run with it 👍

[@Firemandave911]

Hey FF What do you think of changing my B to a wide front end??? Pros and cons???

[@FarmallFanatic]

It's really just a personal preference, I had a neighbor that did it they just took the front end off of an A

[@snowman1194]

i think squatch's one he calls a tumblebug , i could be mistaking its been a long day lol

[@FarmallFanatic]

You're correct

[@davidcampbell1306]

Pond scoop is what we called them

[@coletaylor6078]

Would you do hafe concrete and hafe gravel for the next shed

[@FarmallFanatic]

Yeah I consider that

[@tbishop6726]

I would think open on top and dirt will fall in all day long and stay in.

[@LauraBruno33]

New toys, red power💥

[@vrgurl178]

The scoop has been called a Fresno back in south west Okla. some times with a long hadle and was pulled by a team of horses. A little before my time. Now you know the rest of the story ! Ok.Hawk

[@bobkinney7913]

Can't hide those toys in the nightstand drawer.......

[@brenterickson1695]

Need a loader for that Super C? I'm your huckleberry if you do..........

[@FarmallFanatic]

What do you got the 1000?

[@brenterickson1695]

@@FarmallFanatic I'll look over the weekend.... Took it off a Super C I had and will have back again soon.... Kind of miss that tractor....

[@ACfairgrounds]

Or fast hitch implements expensive

[@FarmallFanatic]

Not too bad just rare

[@crocketteerden6240]

It looks like your drag needs a scraper blade

[@FarmallFanatic]

Or 2

[@mcleanfarmsryan3897]

Jeez farmall I don’t know how big your farm is but I think your gunna need a bigger farm for all this equipment

[@FarmallFanatic]

I mean I'm trying not to buy more tractors but I can't stop myself

[@mcleanfarmsryan3897]

@@FarmallFanatic so you have classic tractor fever and there ain’t north wrong with it I’d definitely be okay with more tractors

[@canadianHAWK3]

To me that is awesome .

[@Josiahdrews1466]

Just outta curiosity what song is in your intro

[@FarmallFanatic]

I think it's called ticket to nowhere

[@williammatzek4660]

3 PT dirt tool looks like a tumble bug.

[@FarmallFanatic]

It is 👍

[@lynnmitzy1643]

💪❤️ Boom

[@duckcotnerantiqemachinery9516]

Squatch has a tumble bug

[@FarmallFanatic]

That's what I thought

[@duckcotnerantiqemachinery9516]

@@FarmallFanatic I have only ever seen one of those in person at a tractor show

[@dannygoin6552]

👋👋👋☕️☕️☕️🇺🇸🇺🇸🇺🇸👀👀👀