Adding more Weight to the 9620R

[@KALI1080]

So there is an important alignment needed for the driveshaft between the transmission yoke and the PTO clutch housing. There is a procedure using special tools to measure vertical alignment of the clutch housing and the transmission yoke. There is also horizontal alignment that may need to be adjusted by moving the transmission side to side. Last thing to check is to see if the PTO clutch housing needs to be shimmed to make more room for the new driveshaft. You may want to ask your dealer if you can borrow the tools to do all of those alignments. Deere started to do that on tractors after model year 2015 to resolve complaints of vibration and noise coming from the PTO.

[@FarmingFixingFabricating]

Did I not show and discuss that???

[@KALI1080]

@@FarmingFixingFabricating That may be in the next video?

[@christinelosos7556]

Andy, I don’t post much but I’m a loyal follower. The purchase of that service / crane truck keeps proving its worth all the time. An excellent purchase and you make repairs look really easy. Ed

[@bobblenuts]

Andy, your video content has always been excellent. Lately, I think your content is so good, a 45 minute video is not enough for us junkies! Loving all your videos, keep them coming. Thanks for sharing your unique shop projects. 👍👍👍👍👍

[@paulcrocker2837]

Fantastic video,, you always make me feel like getting my hands dirty, and the truck having all new lines looks lovely,

[@KevinRichardsIH]

I saw the C5 sitting there. Figured you were getting that done. He does a good job sandblasting and painting frames.

[@chuckyc6912]

Hi Andy top notch video. Always interesting stuff

[@sonnybeachdb9821]

Your service truck is becoming so handy with the crane I'm thinking about updating my old truck(its shot)to something newer with a crane like yours. Thanks for showing me

[@mikegozdziewski3289]

You all amazing, Jarred stays at it. Great family

[@rw3dog]

The truck frame looks awesome. That service truck sure is comIng in handy.

[@martinboilard2265]

Hi Andy ! good job everybody ! Thanks for your time and have a good everyone at the farm ! 🙋‍♂️

[@vaughantomlin7816]

Another great video Andy. Look forward to every video

[@PaulTighe-e2n]

Andy you guys are amazing to be able to do that kind of work on those rigs

[@nicklambing9268]

Some very nice problem solving and patients with the tasks at hand! Keep up the great work. Nick, North West Farmer (Oregon)

[@jamesmorrison1884]

Nice work Andy enjoyed your video thankyou sir have a great day.

[@ronaldfeuerstein435]

Tks for sharing. Hope Miss Alex didn't give you a eye roll about her truck clamps? You better pay closer attention to her repairs! She probably will fired you next time. LOL.. The service truck is coming in real handy.. huh

[@georgekuiper3066]

Great Job Andy, Excellent Work @

[@kevinrutt5949]

Well one thing for sure now you will have top noch now Andy you guys do such a great job keeping all your equipment top noch which is really cool and you guys have the knowledge to put all back the way you need it . Which is really righteous keep up the great work Andy say hey to the family

[@terrydarow8401]

Nice job guys of being safe and taking care of your equipment

[@steve-k3y9h]

Another great video thank you to you, your family and staff. Your knowledge is amazing thank you I enjoy all your videos.

[@klousy58]

That's thing is a beast. Awesome videos

[@philglover2973]

Awesome video thanks Andy very much appreciated top job top team 💯🚜🚜🚜🚜🚜🔧🛠️🔧🛠️🚛🚛

[@patrickerger7271]

Andy always interesting. Great video 😊

[@280813jb]

The truck looks really good.

[@JonDingle]

Great work young man!

[@donniehodge2548]

The service truck was a good choice Another good job Andy 👏

[@jong7641]

Hey Nate; great thought for the day. 😂 "Go buy a lottery ticket."

[@MWestern-m4g]

The Service Crane is one fine tool. Beats using the A Frame! That bearing stretcher really works nice. Much better than a torch stressing everything up. Thanks for the views. Do buy a Lottery ticket. Go crazy and buy 2.

[@kevinkevlar8050]

Nice work Andy as always👍

[@iaingibbs9589]

Looking good job doing the job your there 👍 👌 👏

[@Sladen01]

I'm a ex oil rigger from manitoba canada that truck looks like it might have been a winch truck

[@smoothbore4377]

Ya just gotta love a crane.

[@drbill44]

Another interesting video. I always struggled getting broken bolts out with those style extractors. Look into a set of Blue Point extractors E1020

[@derekgilbert2884]

Andy great job on video's keep up good work 😊😊😊😊. Like you said got shaft again from John Deere moving forward need ask them for Vaseline 😅😅😅😅😅😅.

[@WilliamL-j4x]

sweet bearing heater....see lots of shows at dealer shops with guys using old crock pots or deep fryers to heat bearings.......

[@Sladen01]

Almost looks like a old fast trucking truck

[@stephensteen9058]

Please vent the shop during crane use, that is all excellent video andy

[@kal3rd]

Great video the c5 is going to look great when Jared gets done with it the service truck is coming in handy for a lot of jobs are you using left handed drills the remove the broken part👍🚜

[@robertburt9071]

When you bought this tractor How many hours on it Thanks 👍

[@x_Dude1]

C5 will look pretty again.

[@Pushy8366]

There’s one thing about a tri drive Andy when you lock everything in you will go in places you shouldn’t can’t steer them but they will go I’ve drove a few trucks in the oilfields that were tri drive.

[@m.j.l.abulle9107]

Pretty daunting job fitting that pto , a heavy drive to go in an awkward spot thats for sure .

[@PAYNEKILLER..]

I had a DriveShaft come off a F350 7.3 6 speed, swung around and smashed the transmission in half. That was a rough day.

[@280813jb]

Your lucky day getting that bolt out.

[@knowltek]

Time for a drive shaft hoop there hot rod..haha..😂😂..six minutes to midnight rebuilt K Dub express..be better than new there after Andy..🎉🎉🎉..cheers

[@dogwoodish]

how many calves would be born on your farm in a year ?

[@FarmingFixingFabricating]

A couple

[@Failure_Is_An_Option]

@FarmingFixingFabricating Did you get that PTO kit from JD? Only reason I ask is I'm a little surprised to see everything painted. At least in my experience when replacing most of those parts in a repair situation they often are not painted.

[@FarmingFixingFabricating]

Yeah from John Deere

[@richardradawetz8788]

Old bj s oilfield truck. 100 s of em in Alberta in the old days

[@danielelliott1570]

Great job ! Do you ever take a vacation?

[@FarmingFixingFabricating]

I haven’t in awhile

[@stevebearrows5092]

They make stainless oil pans for the cummins

[@JuliaPillis]

Will you let us know a cost for this job when you are finished?

[@FarmingFixingFabricating]

The tractor?

[@JuliaPillis]

The tractor added parts

[@FarmingFixingFabricating]

@ $28,000

[@Coop-h1d]

@@FarmingFixingFabricating unreal $$$$$ I was guessing $18,000

[@tacydit]

Has your Easy Kleen pressure washer been a good one? I want to buy one.

[@FarmingFixingFabricating]

Yes it has

[@tacydit]

@@FarmingFixingFabricating thanks 😊 Andy

[@Northernman68]

How's the new parlor coming along??

[@jerrymurphy6673]

There yAll go again repair thank you

[@shaddowland3811]

What part of Farming do you enjoy the most

[@beckyumphrey2626]

I think he really like the shop work.

[@beowolfgang]

Chopping i guess ;-)

[@mikegozdziewski3289]

Question? Do you all stop for lunch

[@FarmingFixingFabricating]

Tea for lunch

[@MichaelBrandao-v2m]

Andy, are you gonna repaint the cab?On that five hundred

[@FarmingFixingFabricating]

No

[@bair24]

What becomes off the pump does it get relocated?

[@FarmingFixingFabricating]

PTO clutch assembly has scavenge pump in it

[@nickroberge7278]

When is the Mack getting the same treatment as the C5?

[@rossnolan2883]

😊😊😊😊😊

[@steveharrington301]

👍

[@chadkanz5958]

I am very pleased with r purchase of service truck😢

[@dangeissinger4906]

Is the John Deere truck dead?

[@danielyoder5928]

Andy, that nipple should be available from an industrial supply house. You could get a heavier wall thickness to prevent it snapping off again.

[@FarmingFixingFabricating]

That factory one looked heavier

[@danielyoder5928]

@FarmingFixingFabricating Andy, schedule 80 pipe should have a internal diameter of about 0.125" (1/8") if it is 3/8" pipe. If it is 1/4" pipe it would be about 0.119" . It appears it snapped under vibration. I replaced a bunch of schedule 40 nipples on a rock crusher because of vibration. That cured the problem of them snapping off. Hope this info helps.

[@mikesfarmmikesfarm3977]

is camera shy nate a family member ?

[@beckyumphrey2626]

No

[@steveb6103]

I'm going to guess that you will never be without a service truck with a crain again.

[@garychamberlain8462]

A Kenworth would not have all of those holes in the frame from the factory.

[@norcalray7182]

Would turning the tractor have helped?

[@FarmingFixingFabricating]

I wasn’t sure if that would have helped or not

[@richardradawetz8788]

Cm870

[@FarmingFixingFabricating]

Yes

[@mweisen1001]

Where is the hydraulic pump going to go now

[@beckyumphrey2626]

It gets deleted.

[@richardradawetz8788]

Built into the pto box

[@mweisen1001]

Thanks guys

[@jeffreykerr8034]

Easy-out are a life saver if used correctly

[@edwhite6250]

👍