If Your Push Mower Won't Start, Do This! A step by step guide to getting your push mower running.

[@talkingcargojunkremoval]

This man deserves a standing ovation. Lots of people on KZbin will only share knowledge if you'll pay for it. I wanna say thank you because you've saved people a bunch of money 💰. But I've always wanted to learn small engine repair. Jets ski's, lawn mowers, zero turn mowers. It seems like it's always the most simplest thing that stops an engine from operating. You got my utmost respect bro. 😎👍🤙☝️

[@FarpointFarms]

I appreciate that! This is one of the reasons why I make these videos it to help others.

[@wicketandfriendsparody8068]

Yeah he does YUB NUB LOL

[@The_Matrix_I_Am]

This comes off as overly pestimistic about youtube. I do find several videos of people helping others.

[@peterpan7025]

Hh

[@chummer2060]

Just bought our first house. Parents got us a lawn mower from an estate sale. I tried to start it up and it acted just like yours. I messed around with the carburetor and it came to life. It died again half way through mowing. I think this is what I need to do next. Pop it off and give it a good clean. Thanks for the great info!

[@FarpointFarms]

You are welcome, good luck with your new home. Have fun and make it yours, don't worry about keeping up with the neighbors, just make it yours

[@Jojotheowl1]

I was trying to start my mower for 20 minutes exhausted and disappointed I googled why my husqvarna mower wouldn’t work. This was the first video. I did exactly what he said and BAM! First pull the mower started right up! Thank you so much!

[@FarpointFarms]

Glad I could help!

[@mchance818]

Old gas in the mower was the issue. Drained it, put new gas in and it started right up. Thank you!

[@FarpointFarms]

Glad to hear it!

[@sotgdallas214]

Can’t thank you enough. Went from a mower that wouldn’t start to fully functioning. Changed the spark plug after the carburetor clean because it was starting and dying. I’ve never done this before and you made it simple.

[@FarpointFarms]

I am glad to hear that you were able to get your mower working again!

[@rachaelbruesch6306]

We live in a small town in Washington State & this will save us a 90 mile drive both ways. Thank you! 😊

[@FarpointFarms]

Glad I could help!

[@ProLibertate2008]

I have this exact mower and have been messing with it for 2 years trying to figure why it wouldn't work right. Exactly what I needed thank you.

[@FarpointFarms]

I am glad that I could help you

[@enrikuar6324]

Very nice, good info, straight to the point, no bad jokes, no anyoing music... love it!

[@FarpointFarms]

Thank you for the kind comments. I try to get to the point versus the videos that never do

[@PapaRomeo068]

Just wanna throw a huge THANK YOU for this video. You easily took me step by step into getting my mower running like new again!!! 10 year old mower starts again like I just bought it! Thanks again!!!

[@FarpointFarms]

That is why I make these videos, thank you for the kind words

[@kennethholmes7097]

80in and 😅w have to

[@gregorygreen8578]

You’re the best! This was the best video and easiest to follow along side by side. Thank you. I can scratch this off the honey do list. I even fixed my neighbors mower and earned the money it took to pay for my parts lol. Simple and free. I appreciate this video a lot. Thanks

[@FarpointFarms]

Awesome! Thank you for the kind words and I am glad this helped save you guys some money!!

[@josemares1519]

Bro for years I get my lawn equipment service by someone else,now you explained it so good I want to do it myself

[@FarpointFarms]

Just take your time and you will be just fine. Those repair companies will be doing the same thing, save yourself $$

[@dogdue4588]

You can do it!

[@JRay4Him]

Thanks, my mower wouldn’t start no matter how many times I pulled on it. Watched the video, followed along on my mower and it’s back up and running. Thanks again. I sent you a small token of appreciation.

[@FarpointFarms]

I am glad to hear that I was able to help you fix it- Thank you for the token- I really appreciate it

[@JasonHeil-pl1hj]

Wow! This is great! The instructions were precise and helpful! While I was dreading it before, I feel like I am now ready to attempt to fix my non-running lawnmower. Well done! Thanks for sharing this.

[@FarpointFarms]

You got this!

[@samwdavis]

If it's a relatively new mower, this is probably pretty good advice. If it's an older mower, and your diaphragm is stiff, you just went through all of these steps for NUTHIN because it still won't start, because he didn't go deep enough into the carburetor.

[@pengliu9987]

This video is very heloful. My lawn mover stopped working after 9 years use. I followed this video to clean the carburetor, which fixed my mover and saved me hunderds of bucks.

[@FarpointFarms]

I am glad that you were able to fix it-no need to waste money

[@kevinkiss6673]

I have similar mower. Followed his instructions step by step. Very simple/easy honestly. One yank of the cord and Boom, got my mower running.

[@FarpointFarms]

Great to hear! Glad it helped!!

[@jyroaz06]

I had a lawn mower sitting for 3 years and with good reason it wouldn’t start. I followed the instructions and started right away. Thanks!

[@gregre052]

Mower will rarely start. VERY RARELY!

[@David-jk6rs]

I don't normally comment but your video is very well done and fixed the problem with my neighbors mower. It also allowed me to find the cause of the problem. He has dirt in his gas can. Thanks so much for your time. I just subscribed and look forward to watching your other videos.

[@FarpointFarms]

Glad it helped- it is comments like this that makes it worth while. Thank you

[@juanitabrooks1811]

What do I do if the dirt is in the actual gast​ank of the mower?? @@FarpointFarms

[@jacksilberman269]

Superb instructional video! Unlike other videos I checked out, yours is Concise yet no steps whatever skipped over. Thank u SO much!

[@FarpointFarms]

Thank you for the kind words, I try to make videos that anyone could follow.

[@judygredler2598]

Thank you for an informative video. I'm ready to have my push mower running again, and after seeing this video, I am confident that it will be. Gather my supplies & go to it.

[@FarpointFarms]

Just take your time and you will be fine.

[@ronaldcumpsty5605]

Followed your advice and steps to cleaning the carb, mower was really hard to start. Now it starts first pull, all for the cost of half a can of cleaner and no waiting for it to be repaired at the local dealer. Thanks a lot.

[@FarpointFarms]

So glad to hear it worked and that it saved you time and money as well!

[@trevorf7748]

This video just saved me a bunch of money . Very well done ! Easy to follow and the camera angles were perfect ! Much thanks !

[@doloresmedina638]

thank buddy from joe from los angeles

[@melissarowell1503]

I can't believe you didn't have to replace the o-ring on the bowl. I thought they tended to get stretched out of shape. Thanks for the lesson.

[@FarpointFarms]

Nope! If it ain't broke, don't fix it. The o ring was ok.

[@bayloruniversity5812]

Thank You SO Much! This helped me fix my mower and right before the holiday coming up, my grass was going on about 2 feet high with all the rain we had here, so yeah, thank you very much.

[@FarpointFarms]

Glad I could help!

[@johncasey5817]

I just followed your instructions in this video and now my lawnmower is working again. Thank you so much for your help.

[@FarpointFarms]

glad to hear that you were able to fix it- Take care my friend

[@guebaradelivery769]

930 last night, I got the mower working. Good video sir, ty

[@FarpointFarms]

Glad to hear it!

[@jenniferfireheart2578]

Just fixed my lawn mower just by watching this video. It's running better than it ever has!!!

[@FarpointFarms]

Glad to hear it!

[@torbreww]

Thanks for this video. You saved me a ton of money. My mower is now starting perfectly.

[@FarpointFarms]

I am super glad to hear it!

[@SIdspoon]

Thank you Bother. You saved me a lot of time and money. I watched your video and then went step by step, pausing the video along the way. And after I finished my mower started on the first pull! Thank you Brother for sharing this valuable information. I appreciate you.

[@FarpointFarms]

This makes me so happy to hear! Makes it all worth while to film them.

[@roypeer3725]

Thanks for the informative video, Eric. It truly was a real help! And now after getting my mower going again (because of your help here), my wife has dubbed me "the lawn mower whisperer". Don't worry, I told her the credit really belonged to you! Anyway, thanks again!

[@matthewtrickel1354]

This was perfect-minus running to the store and gathering my tools, it took me about 20 minutes, and a mower that wouldn’t start ran like it was brand new. Great video, thanks!

[@FarpointFarms]

Glad it helped!

[@twinkie3793]

Great step by step guide. If people would take care of there lawn equipment they would not have problems.

[@FarpointFarms]

Even with good maintenance things can still happen.

[@twinkie3793]

Yes thats true

[@DrPhillipMcCracken]

Thanks for the vid. I abbreviated by pinching the gas line, removing the bowl, cleaning the jets and I'm back in the game, baby!

[@FarpointFarms]

Glad to hear it!

[@markaes]

This is my problem 95% of the time. Even with ethanol free fuel I still have to clean my carb a couple times a summer. Depending on your model/engine it might be really easy to access without taking any parts off. On my last 3 mowers and snowblower (Husqvarna, John Deere, Simplicity) the carb was right there on the side-- all I have to do is clamp the fuel line and and unscrew the carb bowl. Easy to do in less than 5 minutes. I also recommend adding a fuel line shut off for $1 and fuel filter.

[@FarpointFarms]

good tips, even if the fuel is ethanol free- it still will contain a bit of ethanol - I add a fuel stabilizer to help with it.

[@cahurst1]

I have not been using my Pushmore for over a year. I’ve just been using the John Deere and my Weedwhacker. Thank you for making this video! I can now use it!! I barely had to pull the string and it started right up. Thank you thank you thank you and thank you again. You are my hero.

[@Dallas-Rife-UDX-347-Tennessee]

Nothing like a Sunday morning with the Farm Family 💪🏼🇺🇸. Good morning everyone

[@GVII300]

Thank you for making this video. You were extremely informative and and because of you I was able to get my Husqvarna mower started after a year and a half of sitting up. Very well done sir, thank you very much and God bless. 🤙🏽🇺🇸

[@FarpointFarms]

Glad I could help!

[@rksmith5273]

Thank you for posting. I will give it a try. I assume this process can be used for my pressure washer too. Perfect instruction without any nonsense and to the point. You have earned another subscriber.

[@FarpointFarms]

You are welcome! I hate videos that spend 5 minutes talking about the weather, their kids, or their dog. "Just show me how to fix this thing! " So I understand you 100%

[@merevazquez9519]

You just saved me a lot of money. Follow your instructions and my lawnmower started like new. Very good video 👍👍👍

[@FarpointFarms]

Glad I could help!

[@YllaStar95970]

Great btw tip, to NOT clean out with a pin, but just allow the spray to do its work.

[@FarpointFarms]

Great tip!

[@courtneychappell6572]

I got one for you

[@courtneychappell6572]

Spray will not work

[@edwardroberts2425]

This video is awesome. I was able to follow the video I fixed my Craftsman 6.75. It was not starting. After I cleaned the carburator it started on the second pull. Thanks so much!!!

[@FarpointFarms]

Glad it helped, I hate to hear that people spend money to have others do this simple (mostly) fix

[@shughes5725]

It worked!! Started right up. Thanks.

[@FarpointFarms]

Glad I could help!

[@CrazySuperZebra]

Thank you so much for this video I watched it twice to make sure I got it. I went outside and cleaned it up and that absolutely the issue it started up immediately after i cleaned it.

[@FarpointFarms]

Comments like this is why I make these videos- I am glad that you were able to get yours fixed

[@SteveTeo99]

So straightforward! What a great result too. Just a light pull, starts right up and runs with strength. It never started this smoothly or ran this well when we got it new from Sears!!!

[@FarpointFarms]

I am glad to hear that it worked for you.

[@dwconrad7776]

I am in awe. What you did in less than 20 minutes would take me all day! Subbed!!

[@FarpointFarms]

That is years of work as a mechanic, there is no shame in taking all day to do it. Anyone can do this job, just take your time and you will be fine

[@alexb119]

Lifesaver! It was super easy to follow along. Thanks for mentioning all the bolt sizes.

[@FarpointFarms]

Glad it helped!

[@edrobertson8304]

I subscribed. May be the tutorial I've seen especially on this type of repair. Keep it up the world needs guys like you. Thanks, Eddy

[@edrobertson8304]

May be the " best" tutorial I've seen on any repair. Thanks again

[@FarpointFarms]

Thanks for the kind words! The cost of these mowers has gone up a lot since I made this video. I really hope it saves people a lot of money as the years go on.

[@bigbizz3503]

Dont throw your mowers away if they dont work. Its cheaper to fix them than it is to buy another one.

[@FarpointFarms]

Agreed, it bothers me so much when people blame the unit when it breaks down. Simple maintenance will help prevent it. I maintain my equipment and still have the occasional problem, it is the nature of it.

[@dukeofnj62]

Just followed your video and fixed my mower. Many thanks!!

[@FarpointFarms]

Glad I could help!

[@johnblanton9845]

Follow up on the “ Husqi “ with the Kohler motor , followed your advice and replaced the air filter , runs like a champ. Mower was given to me because “ it don’t run no more “ Amazing what people will toss instead of doing some inexpensive maintenance.

[@FarpointFarms]

A little know how goes a long way, I am glad that yours is running again!

[@richardmorse5307]

Your video was very good as I’m going to try to get a Craftsman mower with a Honda engine back to life after sitting in a shed for 2 years. Thanks for posting!

[@FarpointFarms]

Glad I could help!

[@stormman8393]

You presented that so well. You're a natural at it, great video.

[@FarpointFarms]

Thank you so much!

[@DirkDiggler1620]

You made this super easy to follow along. Appreciate you sir

[@FarpointFarms]

You are very welcome, I hope it worked out well for you

[@dannylinc6247]

You need to empty the fuel tank and rinse it with clean fuel and dump it. Check it's screen and blow back thru the fuel supply hose for the carb. If the fuel sat for years, you're going to find it has changed while it sat in the tank. It's best to run them out or drain them if they are stored and going to sit. Then clean and gap the plug to .030" Start with fresh fuel on assembly. Find out about your autochoke for it needing attention to operate freely. This one just had a little debris he saw while spraying the carb out. But there are other ways this job can turn. Everything went great here.

[@Handler7775]

Thanks mate, had the same problem and now it’s back running! Thanks heaps 🙌🏻🙌🏻

[@FarpointFarms]

Glad it helped!

[@FloridaRadioMan]

So I knew I was about to do this very thing but haven’t worked on a lawnmower in a long time.. Thank you for posting this! I knew it was super simple anyhow but just seeing someone else knock out cleaning the carburetor before I went and took the same task on was nice!

[@jeffbyam]

Very good quality video and instruction. One thing i normally do is remove the bowl gasket...carefully...before spraying brake cleaner everwhere. Or at the very least try to avoid hitting the rubber gasket with brake cleaner....as i have found that brake cleaner can distort/ruin rubber. Apparently carb cleaner doesnt hurt rubber as much. Well done!!

[@FarpointFarms]

Thank you for the kind words, I try to make videos that anyone can follow

[@johnblanton9845]

Just picked up a “ huski “ with the same issue , but it has a Kohler motor , good info , now the fun begins. :)

[@FarpointFarms]

Good luck!

[@brendahilsercop6731]

@@FarpointFarms ddfv

[@Kat0294]

Thank you for sharing your knowledge to help people. Great tutorial!

[@FarpointFarms]

Glad I could help!

[@Tater26013]

Eric, I had the same issue, I cleaned the carburetor and I also had an issue with my spark plug being fouled beyond wire brush and I replaced that, and gave it a new air filter and an oil change and its good to go to cut the areas where the riding mower can't.

[@FarpointFarms]

Thanks for sharing!

[@kelsyec5419]

i took the lazy way out and replaced the spark pluck … worked like a charm 😮‍💨

[@FarpointFarms]

sometimes that is all it takes, other times, it is more indepth

[@Dallas-Rife-UDX-347-Tennessee]

5 minutes in one of my springs would have catapulted across the floor finding it’s way to the eternal Bermuda Triangle wormhole and vanish , joining the other nuts, bolts , washers n sockets I’ve mysteriously lost over the years I couldn’t find after literally keeping eyes on it as it bounced across the concrete 🤷🏼‍♂️

[@FarpointFarms]

That does happen to the best of us.

[@richardluce775]

Mine just launch into Low Earth Orbit.

[@markvirts5883]

I have that problem with 10 mm sockets. Always losing them.

[@Leon79ification]

🤣🤣🤣🤣🤣

[@tysonhenry37]

@@markvirts5883 lol. Everything uses them too!!! 🤔

[@vernonwilliams1261]

Excellent video! Lawnmower works great. Thank You

[@FarpointFarms]

Glad I could help!

[@terrencegibbons3351]

I knew I could trust a guy from the mountains on NC

[@FarpointFarms]

There are some good people up here,

[@djwill9166]

Awesome video! Thank you for taking time to showing us!

[@FarpointFarms]

Anytime, thanks for watching

[@urbangamehunter2531]

Great diy for everyone out there (including myself) that leave their mower sitting for too long. 👍🏽

[@FarpointFarms]

Thanks 👍

[@leehansen4750]

I have a snapper mower and every fall after mowing is done I run the mower until I have 1/4 or less of gas in the tank. I put it away and in the spring I add fresh non ethanol gas and it starts up right away. Once in a while I add starter fluid so I don't have to yank the cord so often. I've used this method for years on my snapper, a Toro, a back pack blower, edger and generator. Running the engine until dry will let seals dry out and perhaps leak. 🤔 This has worked for me for 20 years and I've saved a lot in gas, and ware and tare on the engines, gasoline, and noise!

[@russdrummond7292]

Install a fuel tap between tank and carby and run the carby dry at the end of each mow session. Add fuel stabiliser to your stored fuel and you’ll shouldn’t need to remove the carby again.

[@azekuka3478]

Every time you run out of fuel, air enters the carburetor.The engine cannot be started.I have to unscrew the carburetor sump nut to emit gasoline.

[@Mike-po2kj]

@@azekuka3478 mine ran out of gas now won't start. Is that nut the one under the float bowl?

[@ekarouts]

Worked like charm! Thanks for making this video. It was really easy to follow along and the only thing I didn’t have on hand was the carb cleaner. Had to make a run to the store to get it but it was well worth the trip.

[@FarpointFarms]

Glad it helped!

[@raptors3164]

Outstanding, I currently am having the same problem, so I'll do as you did, thank you for sharing. 👍👍👍👍👍

[@FarpointFarms]

I hope it works out well for you.

[@jacm7256]

Knowledge share is power. Thank you for sharing this very informative and effective way to resuscitate my 20 year old 3.75hp mower. I almost bought a battery powered unit but I thought I should check youtube first and see if there is a clear way to fix it. Your video did it. So well done and easy to follow. Many thanks.

[@FarpointFarms]

I'm so glad I could help you save some money!

[@jamienoel]

Forgot to let my 2 cycle mower run out of gas in the fall and need to take the carb apart again. The gas usually evaporates and leaves an oily film. Easy enough fix.

[@randyyeung9285]

So true! In my case hard starting has been result of ethanol blended gas gunking and corroding my carb, and usually takes a thorough clean before I can use my mower at the start of the season. A few years back I got sick and tired of the annual carb teardown, and since learning how to separate the ethanol from gasoline, been using only ethanol free gas in the mower. I do have to buy premium gas since removing ethanol drops the octane, but the mower and trimmers don't seem affect much with lower octane. Starts now every time first pull.

[@FarpointFarms]

Good to hear, I still would recommend a stabilizer as "zero" ethanol gas can still have a very small % of it in there. Better safe than sorry if you will be not using it for a while.

[@rbheiss]

Nice video! I cleaned my carb last year which kept me going but I wasn't as in depth as you were here. So now that it's time again to think about mowing I'll be a bit more through this time around. The mower is old now but I'm sure I can get another season or two out of it! Take care, Rolland

[@FarpointFarms]

i bet with a good carb cleaning you can get more than a few years of use.

[@Barbarian1956]

Learned a new trick, will use brake cleaner to clean my carbs now. Nice work

[@FarpointFarms]

brake cleaner also makes the best wasp spray- they are dead before they hit the ground- Wife is allergic so that is our go to.

[@Barbarian1956]

@@FarpointFarms Thanks for the tip.

[@bosesudeep]

What a fabulous video! THANK YOU SOOOO MUCH for taking the time to make this video. Very well done!

[@FarpointFarms]

Glad it was helpful!

[@stephaniesmith6696]

Thank you for your instructions on cleaning the carburetor, I followed and it worked.

[@FarpointFarms]

Great to hear!

[@GuysPlayingWithTools]

Nice video, watching you work, I had no doubt it would start right up.

[@zburzycki]

I really appreciate this video man! my mower has only been sitting a couple months so I figured it was either gas, which I changed out, sparkplug which I'm still gonna check or the carb. cheers!

[@FarpointFarms]

Glad it helped!

[@Hawk170122]

“There ain’t no gas in it!” 🤣

[@barneymm2204]

"See there Scooter? Thinks of the simplest thing first."

[@Hawk170122]

@@barneymm2204 🤣🤣🤣🤣🤣

[@p.r.e4life412]

😂😂😂😂😂😂😂

[@serenap.1041]

🤣🤣🤣🤣 love that movie!

[@Slt3g]

THANK YOU! This is my mower and I'll be cleaning the carburetor tomorrow! I'm sure this is what the issue is! 😊

[@FarpointFarms]

Good luck!!

[@frankc1430]

I use seafoam in all my small engine machines. It eliminates a lot of carburetor cleaning. Not to mention seafoam is also a fuel stabilizer.

[@frankc1430]

@DownintheHoller actually I use seafoam all the time. It keeps the fuel system clean.

[@davidmoran4471]

I use a 50/50 mix of seafoam and Stabil 360 and a shot of seafoam in the plug hole. Pull the engine to compression stroke, to close the valves and good to store.

[@frankc1430]

@@davidmoran4471 you don't need to mix 50/50. It says right on the can of seafoam that it is a fuel stabilizer. And I definitely wouldn't put it down the cylinder. It's not an oil. If anything you're washing the oil off of the cylinders which will cause corrosion in your cylinders and rings when sitting for long periods.

[@philiplombardi5057]

Eric shows how to clean the carb and fix the mower! FYI; exact same repair for snowblowers for us northerners. Thanks Eric!!!

[@FarpointFarms]

Anytime-

[@robbieevans6536]

95% of the time it's the main jet at the bottom of the float bowl if it's been sitting around a long time...Don't even need to remove the carb to get at it.

[@vlmmnadet1304]

It is better o actually do it, not o do so is more of a laziness or neglect.

[@Seaknot56]

Sometimes you don't have enough time to do everything. Just at least try the jet you can get to instead of being lazy and not even atempting. Also if you are doing everything make sure you don't forget that float jet!

[@Seaknot56]

Good tip robbievans536!

[@garytucholl7699]

I tried the jet…made no difference. New air filter, cleaned the jet, cleaned the gas tank, put in clean gas. Still won’t start.

[@robertwilliams4208]

Spark plug?

[@PolarBear1386]

Will be doing this in the next day or so. Thanks for the clear and easy to follow video. My trusty 2008 Toro gave up late last year and after some basic steps (filter, spark, etc.) didn't work I figured I would be needing to deal with the carb next. Did the same on my edger a few years back but I am glad this carb has significantly fewer parts.

[@FarpointFarms]

I hope you are able to get yours started. Just take your time, and you will do just fine

[@eddymumford4086]

if mine don't start i scrap it and then buy some beers 🍺🍺🍺🍺.... just kidding 😂

[@FarpointFarms]

If you scrap it, you can't afford to buy beer and a new mower. This way you can do both

[@eddymumford4086]

@@FarpointFarms I will get $15 dollars for it for scrap... then I will find a nother free mower on garage day WIN WIN 😁

[@gregre052]

Gotta smile. It is pretty much an 8 hour round trip. Thanks even if the trials are not quite aross the finish line.

[@FarpointFarms]

OK

[@skipdow3]

Did I miss something ? I don't remember you tightening the bolt on the automatic choke . The shiny one. Or did I blink at the wrong time ? Good video. I plan to try this tomorrow.

[@talkingcargojunkremoval]

He did homie. 😎👍🤙☝️

[@kylesylvester6139]

Dude you rock saved me a lawn mower. Thanks if I ever see ya beers on me. Cheers.

[@FarpointFarms]

Thanks for the offer- I am glad I could help you

[@Chuckbreakseven]

Got the mower running today after no luck all summer, took literally only half this video to get me moving again. Thank you.

[@FarpointFarms]

Glad I could help

[@mrbluesoles8749]

Thanks for this informative video. I’d also suggest that you check your air filter first. My carburetor was clean but a dirty air filter was keeping my mower from starting.

[@FarpointFarms]

Great tip!

[@rwadley15]

17:10 don't know about you, I always have the hugest grin on hearing the sweet sound of an engine running on the first pull. Great video.

[@FarpointFarms]

oh yes, me too!

[@Ranjer-os5wr]

many thanks for posting this.

[@FarpointFarms]

You're welcome, I hope you were able to get yours started

[@GeeTrieste]

Through trial and error I suspected and usually did this, usually in place. But this makes it far more formalized and clears up many of the black art mysteries that build up as repair superstitions.

[@FarpointFarms]

No mysteries here

[@juanitabrooks1811]

And thx 4 showing us where that little gasket goes, my goodness 😳

[@FarpointFarms]

You're welcome

[@jessicadealba654]

Thanks for this video! Worked to get our lawnmower going again after not using it for over a year.

[@FarpointFarms]

Great to hear!

[@ghambino1]

Excellent video and you just gained a new subscriber.

[@FarpointFarms]

Thank you sir!

[@stevejackson7899]

Thanks for your video! I'm now gonna go try what you showed me to do.

[@FarpointFarms]

Good luck!

[@hlisboa58]

Eric that was very informative. You make it look so easy and smooth. I know that my husband get do this. He is very handy. Nice video and information. God Bless.

[@FarpointFarms]

Thank you for this- I was trying to make it in a way that anyone could do the repair

[@jswagg1826]

Thank you for sharing. I had no idea what to do and your video was absolutely perfect!

[@FarpointFarms]

Glad it helped!

[@johnivan5456]

Thank you for your video. Very helpful

[@FarpointFarms]

Glad it helped!

[@johnivan5456]

I'll be trying a couple of things tonight to see if I can get my mower running