FAST Removal Of MAJOR Imperfections On PAINT! This Is What Was Used!!!!

This video Shows what can be used to remove major imperfections on painted surfaces. Auto paint correction can be difficult and time consuming....this may help. G 360 -Farecla G360 Super Fast Compound easily glides over the surface while rapidly cutting to remove P1200 sanding marks-saving time and money. Transparent in use, the operator is able to see these marks disappear permanently. Use the product on a clean, cool surface. Then use an electric or air buffer set between 1200-1500 rpm, applying light pressure. In each step, apply enough (dime size) compound to the paint surface to work a 2 x 2 ft. area. For best results, use enough compound to keep a thin wet film on the surface for several passes.
Additional features and benefits include:
Removes P1200 or finer scratches
Use on all refinish clear coats and OEM paint
Heavy viscosity for reduced sling and easy clean-up
Utilizes easy glide technology
Farecla G 360...www.amazon.com...
Follow The Apex Detail Support Group on Face Book for any questions, concerns or if you are in need of general detailing knowledge whatsoever!! / 946245059134747
Follow Apex Detail on INSTAGRAM for more exciting projects!!
/ apexautodetail
apexautosurfaceprotection.com
Apex Detail Support Group (FaceBook) / 946245059134747
#fareclacompoundg360 #paintcorrection #autodetailing

[@apexdetail85]

This is body shop safe as well...what do ya-all think?

[@TheCeki1982]

Farécla products | Surface Finishing Specialists are certainly not bad. Whether it scores better than Sonax? Personally and purely personal, I see no reason to prioritize this brand. On the other hand, someone who has learned to work with Farécla will have found his niche in this. Here in Belgium this brand is less known, 3M and Sonax can be found everywhere. In addition, Nanolex, Poorboys, 3D etc. Still a nice upload.

[@Mdetailing]

We like them in europe. They also have upgrade the G3 to G3 premium witch is step 1 plus step 2 on one.product according to their numbering on their product line. I suppose something like 1 step like sonX 05-05, koch f6 e.t.c Maybe you like it if it is available.in usa

[@delawarecop]

I personally found that Roar920 cut's the fastest and leaves the best finish after removing peel with 800, but make sure you keep it wet, otherwise it burns FAST & DEEP into the paint.

[@omarsmobiledetailing7287]

I would like to know what kind of wool pad you are using thank you.

[@bigd9848]

Looks like a good system. I would use it for a vehicle that has a terrible finish. I love products like this and I appreciate your knowledge.Thanks Brian ✊

[@kevincampbell8298]

A friend of mine has a body shop. He uses their products exclusively. He does a lot of custom paint and show cars and he swears by it. Says it saves him time as the compound cuts so well. It saves him sanding steps.

[@Wyldebulldog58]

Would love to see the comparison between this system and the 3D 500 and 520 system

[@TheCeki1982]

The combinations are also figuratively endless. Various pads, machines, etc. A quick calculation is shown below. With which we can state that there is no conclusive answer or solution. Elements to choose from: 8 Elements chosen: 2 Number of variations: 56

[@zzhughesd]

Can you use black pad lower speed more G360 other than the fine for a step 2 or gloss?

[@protouchcarcare4444]

I’ve been using G360 for a few years. It cuts like a demon. However lately I’ve moved to 3D ACA510. Costs and dusts less. I’d still rate G360 as a better cut than ACA510, Koch Chemie H8 and H9

[@apexdetail85]

If I stop and load up the pad again after 60 to 90 seconds...I have no dusting.

[@brettklesitz9626]

Cut nibs with 3" 2000 grit BlackIce, If you need to match orange peel hit with 6" Q775 2000 Super Flexible Film and Interface pad. Then hit with G360 with Coarse Waffle pad, G360 with Fine Waffle pad, done. Hands down the best process. Water based, cleans off with water, doesn't harden like concrete in door jambs and no silicone or wax fillers that hides scratches.

[@David-Godin]

Interested on how you think that it compares to Sonax or 3D?

[@apexdetail85]

It is up there with them in the top 5.

[@ETPAK]

I used this product. Very messy, much dust, fuses with molding. It didn't work for me and i used many different pads. Just too messy and dusty. I forgot once to wipe off from molding and that was a mistake. It just didn't came out after drying. So i stopped using it. Took a loss of $500. Sitting on my shelf for the last 5 years. 7 bottles of this company.

[@apexdetail85]

Sorry to hear that. I had no dusting as I blew off the pad and loaded it up again every 60 to 90 seconds.

[@ETPAK]

@@apexdetail85That is nice. I used this product 6 years ago. They might have upgraded their product. I was very excited when i bought this product. I used it and disappointed. But once again that was 6 years ago.

[@tommyholt3465]

I’ve been adding a bit of Xtreme Solutions lvr ice to my m105 to cut down on dusting and increase cycle time while I finish the bottle off. I’d give this a shot if you want to use up the old product.

[@edsonherald3720]

I Think It Left Some Haze Behind After Polishing (Black Foam Pad) ! I Don’t Know If It’s The Point of View From My Sofa ! 👍🏼👍🏼👍🏼

[@apexdetail85]

My lens was dirty...Check again when measuring gloss.

[@jamiegregory5718]

Nice video. Im an amateur but i find i get alot of dust and the compound is snotting up on my pad when im using farecla products.

[@texfromro]

ideally you should tell what car the test panel is coming from. It is one thing to correct a soft(ish) clear and totally another thing to correct a super hard german clearcoat. I had a couple of BMWs over time with clearcoat so hard I could barely sand them. It was a pain to polish them....

[@gvman6464]

My kia stinger had a months worth of las vegas dirt on it. I told dealer do not wash. It was mistakenly given the old speed wash and the clear coat it now trashed. Spoke with service manager who said he was an ex-detailer and was told an automatic car wash is what caused the damage. He then said that a hand wash can't cause scratches to the paint and that the pressure washer that they use gets all the dirt off before they hand wash it. Brian after watching this video i would say the scratches in my clear are 2500-3000 grit equivalent. If someone who stated they were an ex detailer said this to you what would you think? He said it was a fact that you cannot scratch a car's paint with a hand wash. The only fact is that it has not been through an automatic car wash.

[@danlc95]

He could telle me two ways to Sunday that he's an "ex detailer". Saying b.s. like that proves he wasn't worth his salt.

[@M.E63]

Never used farecla in U.K but here they are very cheap , some of there compounds are as little as £15 for 1kg which is around 20usd, the g360 is more expensive , around 45usd but the finishing one is around 25usd for 1kg

[@richardseem7948]

Awesome video and product review. Going back 2 the beginning with the sandpaper chart.love it seems like a solid product

[@WilfredGreen-ov8bh]

is it a better cut than any sonax or jescar?

[@ShineYourLightDetailing]

Quite impressive Brian, thank you so much for the video! 👍🏼👍🏼

[@kimnewling5728]

Hi Tim

[@ShineYourLightDetailing]

@@kimnewling5728 hey Kim!

[@betametabravo3547]

Wow!!! Good stuff! Thanks!!

[@davidvelez6923]

Use it in combination whit the GMop pads and your going to switch to Farecla ... And you are the most demanding for quality and purest ..

[@RJ-nf3jm]

Might be glossy on the meter but looks like holograms and haze left in final shots. Also, several questions posed by people below that aren’t answered. You should answer, as they are good questions, especially about aggressiveness and possible burning and questions about your beloved euro pads.

[@apexdetail85]

I answer all questions....just not one at a time. I run a few businesses as well. Dont have time to stare at a computer all day. :)

[@RJ-nf3jm]

I appreciate the time and knowledge you share freely with the world and have no idea how you manage everything. But you do it well, and you do respond. Thank you and best always.

[@mylordass8120]

I first started using Farecla back in 1999, it was the most aggressive product on the market at the time, it litterally felt like sandpaper and dusted a ton and was not nice to wipe off! and good luck getting the staining out on plastics and rubbers.... i can see it has changed a heap.

[@FadetoBlack1463]

Sonnax Ultimate Cut maybe? Because of the way it finishes.

[@as680783]

Yeah. I use that and also Cut and Finish, NP 03-06. The Sonax NP, besides a great cut, leaves a gorgeous gloss!

[@danlc95]

@@as680783 - Those were my favorites from the Sonax line.

[@pauldolman]

great video, i'd be interested to know how the g360 finish system they sell compares to your g3 fine, have you tried the g360 finish?

[@leonnagy4538]

Thank you. Can i use the g360 compound with sonax perfect finish??

[@thalisalovetekenen]

Hey i would love to see a battle whit 3d one vs zvizzer one and 3d aca 510 and 520 vs the labocosmetica audance and fiero 😁

[@MikesAutoDetailing]

Fantastic review, great video

[@LilRick96]

Oberk system, Sonax ultimate cut and PF or CarPro Ultracut

[@poloshectman3985]

Really makes me think twice about paying almost $2k to correct paint my fairly new car and 2-step ceramic coat it.

[@djdecember1]

Farecla proven to be superior when used on Hard polyester and polyurethane aircraft paint

[@gooniesmikeysd]

Thank you so much for making videos like these. It's a perfectly cotrolled testing environment that is quick, informative, and takes all the guess work out of things for mobile detailers like myself. You are a total class act - thank you again!

[@patriklennartsson9099]

I have used farecla no for over a year. I mostly paint and buff large turist coaches and time is money, this is effective and very fast. The best product i ever used.

[@WestfieldFreshAir]

Great video. Looks like fantastic products as well.

[@gritfalls2111]

Another great review! Always straight foward, to the point, and informative. Thanks!

[@peterjurenovskis5933]

I love your work on ‘non retail’ brands Brian! Truly eye opening.

[@lorenreyes2855]

That's quite the turnaround Brian! Very good 👍 Thanks for sharing!😉

[@dtail4u]

Excellent video as always, but i didnt like those Green Bay packers color towels. I thought you would be using those Steelers colors.👍🇺🇸👍🇺🇸👍🇺🇸

[@apexdetail85]

Right on!! lol

[@sylvainmarier4818]

Very impressive. You know the problem is Brian ?? You bring us a better products after we bought the one you shown few weeks/months before 😂😂 No seriously, great video and it would be very nice to see the comparaison between 3D, Xtreme Solution, Koch K and this product.

[@apexdetail85]

If the ones you bought are working....stick with them.

[@andrewhaynes09]

Great video! Im having a lot of issues getting the scratches and hazing out of the paint of my 2019 Toyota Tacoma with midnight black metallic paint. Would you recommend this product? If so - what pads would you pair with? My most recent (not so successful) attempt was with the following products: Griots synthetic clay mitt Adams strip wash Griots G9 DA Rupes DA coarse compound Rupes DA coarse wool pad Rupes DA fine polish Rupes DA fine foam pad Any help or advice would be appreciated!

[@davidvelez6923]

Menzerna 3800 whit Finishing Pad ( Maguires black Pad)

[@jdisdetermined]

Sounds like two separate issues. What do you mean by scratches left behind? Are you talking deeper stuff not fully removed or is it not even removing swirls? Either way that usually means not enough cut. If even swirls aren’t coming out, you need to up your cut. Turn the polisher speed up, slow down your arm speed and use a bit more pressure. See what that does. The rupes pads are fine, you can stick with those. Really deep stuff is usually a wet sanding job, and unless you’re *positive* you have plenty of clear left, be very careful how far you go with those. You’re also leaving haze behind, which can mean the polish doesn’t have enough cut to clean up after the compound, but it means it’s not finishing down well in some fashion. That is often due to softer paint. Are you working clean? Are your towels and pads fresh and clean? Are you cleaning your pad after every section and/or changing pads frequently? Working clean and residue control is a huge factor. Toyota paint can sometimes be soft and finicky. Are you using the yellow or white Rupes pads? If you’re using white, try the yellow first, see what that does. Some soft paint actually finishes better with a stiffer pad. If you’re using yellow, try the white first. Try yellow then white. Try using more polish, try using *much* less. Try doing just a single pass instead of several. You have to find what makes the paint happy. The Rupes liquids aren’t the absolute best, but they definitely work.

[@ntonytay]

Has a hard time polish out scratch from 1500 using DA. What speed is ure using for the DA?

[@apexdetail85]

3rd speed setting.

[@coreymerritt7742]

Hi Brian would it do alright with the 50/50 Uro fiber on a da I’m still not comfortable using my rotary thanks

[@apexdetail85]

Not quite as aggressive ...but absolutely.

[@moescardetailing6836]

what dou you think about the G360 when you compare it to the ACA 500 in terms of cut?

[@apexdetail85]

Quicker cut...but shorter cycle time.

[@oursulaert]

Thank you Brian

[@Nick-ue5bp]

how do you like these compared to the blue and yellow rupes compound/polish?

[@apexdetail85]

I am honestly not the biggest fan of their polishes....I do like their pads however.

[@MNpicker]

Very intriguing 🤓👍

[@SittingWithDogs]

Great video Brian

[@larrydavisj]

Impressive.

[@moisesperez3693]

How much did you say ? Sounds kinda HIGH

[@apexdetail85]

2.2 pounds for $65

[@mikeyp2447]

Should be great for older Corvettes!👍🏻

[@apexdetail85]

I think so too!

[@craigandrus327]

Very impressive. I can see it being used on harder clear coats.

[@apexdetail85]

That is what we use it for.

[@Ecdetails]

Brian where does this land on the compound chart ?

[@apexdetail85]

Top 5.

[@Ecdetails]

@@apexdetail85 oooo what are your top five I know Sonax cut , 3d 500 xtra cut what are the other ones

[@lifeofbrian9511]

Very impressive!!

[@mayursinghcharan9329]

❤❤❤❤

[@richardpalmer4936]

What pad is the blue one you used on the da?

[@apexdetail85]

To cut? Or finish?

[@richardpalmer4936]

@@apexdetail85 both please

[@ExclusiveTint-CarDetailing]

Any cut and polish will work using the right pads and experience

[@marioskosmidhs9454]

Any pad will work if you have experience

[@apexdetail85]

You can correct with hand lotion with the right pad. Efficiency and speed is what I am referring to.

[@aboutmyfathersbusiness8324]

Seems really aggressive. I'll stick with the lighter TW compound. I like to take off the clear coat in nanometers😀 You only have so much clear before pulling color. Thx for the review!

[@joefro9473]

1ST TO COMMENT!!!!

[@404notfound.....]

1st from 🇨🇦

[@kimnewling5728]

I like simplicity. 2 bottles. In your opinion, do you think the fine cut would be good on soft clearcoat for a enhancement? Good video.

[@1stfrompuertorico568]

1st

[@as680783]

Putin bot.

[@1stfrompuertorico568]

@@as680783 😄Who you?😄