Father & Son Project - Sound System Install GMC Yukon 2 12's - Speaker box Video 1

[@meade916]

14 people had a shitty dad who never taught them how to ride a bike, throw a baseball or work on cars. Don't take it out on me! LOL :D

[@th3unn3rv3d3]

I don't get it either man. Haters gonna hate I guess. Looks good and the boy is learning the trade, nothing wrong with that.

[@philrab]

Thumbs up for being a father. Teaching your son, having him do the work, passing that knowledge down. Looking forward to this build, and hoping we see more from your boy in the future.

[@headlessjoker98]

That's is one lucky ass kid to have you as a dad. U seem like the coolest person ever.

[@HarrisonPlaysCoD]

Passing on the skills - you're a great dad, and this is great to watch!

[@meade916]

he is fun to work with because he pays attention! thanks a lot! :)

[@xumot]

meade916 but still assembling box with nails. What's up with that?

[@meade916]

Tomas Sabalas and? i used a few screws...to hold the brace in. LOL. You don't need screws to build a box. Just clean cuts, glue and nails. Look, now i just passed on some of my skills to you! You will thank me later (if you build boxes and own a nail gun/compressor)

[@xumot]

meade916 I've had build few boxes for subwoofers and all of them were build with glue and screws. I don't have nail gun and even if I had one, I would never use it to build subwoofer box, EVER. I've build box for my Cerwin Vega 12SVC and although it's ported box (less pressure compared to sealed box), vibrations from speaker would crack that box open in long run. Well, maybe not, but I really wouldn't want that. Anyway, I see I won't make a point here, so all I can say is, good luck using that box and hope it doesn't split open in long run :) Best regards to you and your son. Peace.

[@meade916]

Tomas Sabalas glue and nails is all you need. You don't need screws at all. The glue does all the work. Ask any experienced box builder (even though you are talking to one). You can take my word for it or you can continue to do it your way. Keep wasting your time, it makes no difference to me.

[@thegreendoormx4441]

Steve, mad props for getting your son involved in this part of your life. It's good to see the tradition is being carried on. Keep up the vids with him, its cool to see a father & son team.

[@thugmelo]

people can say what they want about you but you can tell how good a family man you are and that alone gets my respect. Im sure you work hard for everything you have so props too ya for showin it off cos theres no better feeling than being proud of something you know you worked hard for!

[@TheJukebot]

A couple years back I put the same setup in my Mustang. Two P3 12's on a P1000.1bd, except in a sealed enclosure. It is cool to see how the models have changed over the years. I build the box with my father too, and I'll always be thankful for the times we got to build together. I'm sure your son feels the same way. Keep up the good vids Meade, I'm looking forward to seeing how this turns out!

[@liled936]

Simple but really clean he's doing a good job

[@meade916]

yup he is! i think!

[@gerardogomez4125]

@@meade916 lol I think.

[@DonovanLeach]

Nice work! I love working with my dad, he's taught me everything along the way, from packing wheel bearings on his F-250, to putting a new floor pan in my car. Glad you guys are doing the same!

[@kyleshelton1636]

Kid is awesome, just like his dad. Reminds me of my dad teaching me to work on Yota's. He's lucky to have you. And he's damn good at using the tools he's provided to build a killer system.

[@MrForkyfingers]

I was heartbroken to when the video ended, I want to see it finished!! I really like how simple it is, Great job Steve.

[@edgarmedina9992]

That's awesome you're teaching your son. Best thing you can give to your kids is a skill. Kudos!

[@jameschurchill8847]

Father and son builds are the best. I remember doing the cady Devile with my type r 12 s on 2100w.

[@techexamined]

Just got done watching the '73 Chevelle Nightmare fix.. hell of a series and you are one hell of a good friend to fix that for him. Glad I found your channel and I am subbing to see how this turns out! GREAT GREAT work!! Wish I lived in Cali to have you work on my car.

[@rhkips]

That's awesome! I still remember building my very first pair of speakers with my father when I was 9 years old. Been hooked ever since! Really eager to see how this build turns out! Can't wait to see more!

[@otoniellopez-borquez9144]

I cant wait to do my son first instal when he grows up. Great install Steve and those haters hate because they can only dream of what a system sounds like.

[@masonliebminger9746]

You are probably the best father known to man, good on ya steve!

[@ActionHank]

Glad to see your son following in your footsteps and getting his first system put together. Can't wait to see it when its done :D

[@Tusuperbis]

Sweet build, especially for us down to earth folks that don't have thousands to spend on a build. Cool you guys doing father/son build also!

[@JTSpencer]

Great to see him putting in his own time building his truck. Can't wait to see how it turns out

[@Dustinkolt]

Nothing better than a father son project

[@theclocker]

Steve, I want to give you Kudos for your front kink panels !! We know your the King on the subs, but your kick panels are the Prime Rib in the business. You remind me of Foose where there are so many details that you never see ! I come from TOW league - old school - Cadillac Hurst AKA Terminator - He was the king back then. Keep rockin and posting!!

[@AustenPeeples]

That's awesome! You have to really appreciate that father/son time! Cool to see. Can't wait to see the rest of the build!

[@volvofreak86]

Watching your videos makes me realize how much i miss having subwoofers in my car, unfortunatly i cannot afford to get some, was happy enough that i could get a new head unit

[@juanrocj0o9htu43ri0k]

u should get some basic like alpine I see them go for around 100$ for 2 alpine type s not the best but they will do the work

[@volvofreak86]

I know about cheap sound systems, used to have them alot, but at the moment i can't even afford those, and as my situation is at the moment being unemployed, i just gonna have to wait extra long

[@juanrocj0o9htu43ri0k]

damn bro sorry to hear

[@chrapladm]

Should be proud of your son for this build. Awesome to see. Great video and look forward to the update.

[@royguimaraes5658]

Looking really nice can't wait to see it completed. I had 2 12 inch P3 for a month didn't really like them took them out went with 2 12 inch alpine type R 4 ohm. I wired them down to 2 ohm now putting out 1 ohm on 2 t1000 sounds 100% better than the P3.

[@drumbasher]

No better way to spend time, than with your kids. Great job to you both!

[@jdub90081]

man i know your son probably worried you to death about putting a system in his ride i know i would lol!!!. Big PROPS goes out to you meade and all the fathers out there who take the time to pass their knowledge to loved ones! this video reminded me of my dad and i working on my system a couple years back, i cherish every and any moment he spends teaching me!

[@CarsCatAliens]

Very cool man.. As he gets older, your boy will appreciate things like this even more ! makin memories man.. Its what its all about.. Keep on, keepin on bro

[@redrebel66]

Nothing better than building something with your son! Especially some audio. Thanks for the inspiration on the trim panels. I was thinking of something similar but hadn't really come up with a complete plan until now.

[@aibecertain3239]

Can't waite to see both of your sons doing install video's one day , Awesome mentor Steve..

[@liro213]

Damn time goes by he's already graduated. That's a hell of a start!!

[@deadlygaming7992]

Wow even simple box builds look nice. Can't wait to see the rest of the videos

[@dalewinner6121]

Father son build, love it. Keep up the good work Meade family!

[@cgpitbull34]

So cool to see you spending time with your son on something you both have in common, alot of parents waste alot of time never doing anything with there kids.keep it up man:)

[@mrpaintballer02]

It's nice seeing a father and his son spending time, mines not i'm my life(deadbeat) and i hated missing out on stuff like this, btw Nice work on the install so far! i just finished my girls setup she has two RF P3 12's D4 on a NVX jad 1200.1. octo port box tuned at 36hz .(4.5 ft^3 too big i know, with a 1.5 inch baffle) but for what it is, it gets down.

[@marksapollo]

Nice, I like the use of that bendy stick thingy to transfer the curve onto the cardboard, very handy. I like a setup like this, nice mids and highs in the front with a sub or two in the back.

[@onipaka]

your son has really grown from the tahoe build. Cant wait till he does his own crazy build.

[@nolanwagner3435]

awesome father-son project Steve! looking good so far & can't wait to see it when it's finished

[@redexpman]

Very nice build Steve! Makes me wish I had the stuff to make a box for my new car (2014 Mazda 3) but living in an apartment I just don't have the space to work. Can't wait to see the rest of this.

[@DylanK811]

Super clean build...looks like he's got pretty good building skills too. The empty space on either side could make for a nice secret compartment.

[@slimshaynie369]

Your work is always so clean. That's why your the only car audio channel I subscribe to

[@lx5.069]

Nice Steve...got your little man puttin it down...he's doing good work...

[@Tony2Pockets]

Awesome vid a lil quality time with dad learning something and having fun

[@michaelmorris5481]

Really nice first system,I didn't have that type of system until they second time around.. Great video gives us fans some insight behind the scenes... Really cool father Son project..

[@rozayvon704]

No matter how simple are beast the vids you make someone always have to hate. Haters gone hate.

[@Lapeno1088]

yah boy looks like he knows what he's doin yall keep doin yo thang!

[@sabrom]

I have one of those P/3 12" in a ported Rockford box and that thing is "BRUTAL"

[@erick308058]

Wow man, I like the way you guys do your builds. I want to do a build of my own but I never done one. I want two p3 12's for my 05' Cadillac Deville. Your son did an awesome job!

[@SSArt98]

*Awesome to be able to do this with your Son, he seems to be very handy with the tools too!* ~ My Dad's showed me how to sign up to the Legion's drawing(s) & how to wait patiently while he ran into bars. lol Oh, he took me to my 1st River Boat too, I had very little $ was busted in 2 hrs, we were there another 6hr's, I sat. _(I took my Dad later in life, to my 1st ever NFL Game that I had to work my butt off to get the tickets, Colts vs Packers_ - _Peyton vs Brett_,Green Bay won)_ *_Anyway, cool to see this Father/Son project, can't wait to see it finished & rocking out!_* ~~ *James*

[@mrp19285]

Hell yea man! You can def tell he's picked up a thing or two from you! Awesome job man!

[@gravlin216]

You always make me wanna go and redo my whole install.

[@nwbasshead]

Can't think of a better way to spend time with your son! 😉

[@HIMheartagrams]

Looking sweet! I'm working on a box for my two Type R 12s for my tahoe and I think I'll try doing that same top piece idea so it looks that clean, never thought of that before! Tell your son (and you lol) I said keep up the good work!

[@benzelliot]

Meade916 love your work, you inspired me to enter the world of car audio. I learnt a lot from your videos. Can't wait to see whats next. Also cant wait to get my RF P3 15" up and running in my new car

[@drillsergeant623]

Cool video! I still got about 3 years to do this with my boy. ✌️

[@grippin]

Great stuff and congrats to him on the good grades and graduation.

[@TheRonaldinhoMan]

Looks good so far man, really clean. Good to see you helping him out too!

[@clydefischer]

Cool start to a fun project! Pass the torch along!

[@brettlyjonesin]

Those P3's are awesome great bang for your buck I have 4 of em on a 2500 watt soundstream rubicon n they take it like a champ banging daily

[@ricocrockett370]

I can't wait till my kids get old enough

[@meade916]

GUYS! for anyone wanting to know where to get the green bendy thing, here is a link. www.mobilesolutions-usa.com/store/p56/25%22_Flexible_Curve.html

[@kingmonkey4661]

Steve My Brotha ! xD

[@MrKoa24]

Just was about to ask, thanks a lot steve you da man

[@Teamkustom]

404 Page with that link ^

[@nwbasshead]

Sweet!

[@jays4forces]

Think for the bendy thing doesn't work

[@billybabab2754]

Steve you always do an amazing job with your builds. Keep it up man.

[@danial09255]

Love the video i wish my dad was super into car audio and had the knowledge you do.

[@Xx1SailorScoutxX]

I like where this project is going. Nice job!

[@FuzzBall1616]

Man Steve I really want a system done by you in my bronco! Great looking work as always

[@jiggyjake32]

You're a cool dude. I hope to do the same thing with my son next year. Keep up the good vids. I enjoy watching.

[@peperulez1]

Nice build. Can't wait to see it finished

[@ExclusiveTint-CarDetailing]

Excellent video great team Father and Son makes me smile.

[@turboman7683]

Good work steve im sure your son is happy with the install

[@itsmemaaaark]

Good shit Steve! Damn your boy has grown a lot! Can't wait for the end result!

[@jpsaudio08]

nice clean and i dont remember your son being that damn big...lol feels like i literally watched him grow up cant wait for build vid 2

[@joevillan892]

Really nice I can't wait to see how it's gonna look!

[@newluck365]

That's awesome can wait to help my son with his ride! I got 3 more years I hope they go slow. .lol

[@nickmiller9677]

1:54 thats why I buy fosgate. Huge power and amazing sound.

[@JacobFrey]

Very cool box setup. Love this one!

[@th3unn3rv3d3]

Those are some nice amps. Just look like they are very clean.

[@tekniquesportz]

love watching your build vids

[@russellclan5randomness12]

Like father like son. love it !!!!!!!!!!!

[@DubstepEnjoy]

Such awesome way to spend time together :) Looks like an awesome project! Keep it up!

[@951mendoza96]

Nice steve cant wait to see how it turns out

[@TPoww]

I really enjoy these type of videos

[@MrKalula]

Perfect Up bringing right there must say son is very lucky getting an excellent skills from the LEGEND

[@biggblack3170]

I wish me n my dad could do something like this....... awesome install!!

[@focused313]

Great vid. Finally saw a great process of making a beauty panel.

[@TC623D]

maaaaan I wish i had a dad like u steve lol Only father son projects me an my paps did together dealt with FIXING his damn buick when it broke down smh! Good stuff bro, just bought a (W7 13) two days ago(expensive AF), I like it, but I have a feeling I'm gonna like it a lot less after hearing those P3's after your done.

[@bruce4695]

Such amazing work guys so clean 👍

[@TIMBEREDWOLF95]

I like how dad works with sons. Father and son time I like that right their

[@GTiGuy316]

That's looking pretty damn good.

[@MrTrick450]

I wish my dad would have helped me but he said I was wasting my money so I learned every thing I know on my own

[@aarondett]

Your son got some mad skills

[@mrmadmike427]

Holy shit Antheny is getting big !!!!!!! P.s nice Father and Son build too 😊

[@Coldaslife100]

the green bendy thing is ... my precious ....

[@richarded22]

i thought ur son was gona get the civic and this just made me feel old i have been waching u sence he was little wow and he is out of high school

[@spicynoodles11]

this is gona look so sleek when its done i can already tell

[@meade916]

we hope! thanks man!

[@MrGroundpounderz]

wow this came out real nice. simple and clean i love it !

[@WShade]

I love how meticulous he is. Awesome!

[@barker271980]

can't wait to start my sons first build

[@zp1944]

Fuckin right! Nothing like seeing a kid using the skills he learned from his old man

[@mcelroy2092]

Love the progress keep up the work you 2