How To Use A Lishi 2 IN 1 Pick For Chrysler 8 Cut Locks

Step By Step instructions On How To Use The Lishi 2 IN 1 Pick For Chrysler 8 Cut Locks.

[@patricklucas8008]

This is an excellent video, i feel very confident thanks to your simple and clear instructions. Please post more videos on lock picking.

[@thepeoplesreviewer7164]

Is it just me or are dodge vehicles the easiest to pick with lishi? Anyone?

[@Physhi]

For lube I use Prolong. I've never looked back after using it once.

[@Truthcanbeconfusing]

Pretty cool. I tried picking a 2011 Compass with no success, I'm new to this tool. I used my EZ Reader. Worked like a charm. I want to Lishi for other vehicles though

[@earthlyng_official4599]

Im also having trouble with a 2011 compass...

[@robsonmarcio7917]

Have any diference between cy24-cv and cy24.v2 ?

[@Ghost_Os]

Lishi or Accureader - What do you personally prefer? I know having both is the best of both worlds, but if you personally could only have one type - which would you choose?

[@outinthebackyard7579]

Try using less tension you will be amazed how much easier it will pick.

[@musicchanal6507]

super

[@asdrty258]

Tension torque? About 2 grams-cm?

[@antoniohenrique5638]

Boa tarde! Qual máquina você está usando pra cortar

[@MiguelLopez-gh5yy]

What is the difference I see the Triton it's cheaper can you tell me please. Thank you.

[@dandydonslife9869]

Cool great video, where is good place to get the lishi?

[@mseiler34]

Where do you find these metal key blanks? I would like to try the first cuts on the cheapest key possible.. Thanks... I think your videos are very helpfull!!!

[@Fatherandsonlocksmith]

Are you talking About the Lishi Pick ? International key supply $39.00

[@mseiler34]

Father & Son Locksmith No the metal key(non immobilizer) blank to create a try out...

[@Fatherandsonlocksmith]

International key supply 10 keys for $3.90

[@mseiler34]

thanks Man, keep the videos coming I am learning a lot from you...

[@thepeoplesreviewer7164]

@@Fatherandsonlocksmith INTERNATIONAL KEY SUPPLY will only sell to licensed locksmith dealer. But, you can also buy them directly from a locksmith for a slight higher price

[@aaronrowland9784]

I had a question for you with the different Lishi tools. After picking the lock, using a gm10, or ford 8 etc, and it's time to decode the lock, often the arm goes to a 3 as an example, but if you put a little pressure, it can go to a 4. How do you know which is right.

[@Fatherandsonlocksmith]

On the Ford, GM & Chrysler lishi when I decode the lock I use very little Pressure were ever it stops that's the number I use.. I use more pressure on the Nissan 10 Cut lishi I'm doing a video right know on HU100 lishi pick and decoder and that is super easy ..

[@Fatherandsonlocksmith]

If your not sure if it's a 3 or 4 check with your accureader for confirmation.... I do that sometimes

[@gregoryfowler8681]

or run your numbers though a code program like insta code live and it will tell you if those are good readings.

[@Fatherandsonlocksmith]

I use fill online lockcodes.com ..

[@thepeoplesreviewer7164]

I input the info into my mini condor key cutter and then press "FIND BITTING". If numbers are correct, then machine will pop up missing wafer number and code. If incorrect, it'll beep and nothing happens or it will pop up next 15 possibilities. That's when you know you've pulled the wrong numbers.

[@dirinkunci4515]

Pagi

[@kedarkarapurkar9380]

Good jiob bro

[@assumattool]

Hlo no new video up load

[@chandusingh1209]

Exalent bro

[@tonysudano778]

So are you supposed to hold them upside down like that?

[@earthlyng_official4599]

i think hes doing that cause the handle makes it hard to hold tension.. itll do the same thing..

[@MiguelLopez-gh5yy]

What key cutting machine are you using?

[@Fatherandsonlocksmith]

3D Pro Extreme.. I just preordered the Triton

[@ocrun6765]

What about #1 - you left it with "?". I've taken apart and there are definitely 8 wafers.

[@Fatherandsonlocksmith]

The ignition has cuts 1-8 The door ....has cuts 2-8

[@ocrun6765]

Thanks for explaining. How can I know the #1 ignition cut without taking apart the ignition cylinder?

[@christopherburgos8379]

There's only 4 possibilities.. Example : ?2342341 1 2 3 4 One of theses has to work... Understand..

[@ocrun6765]

I do understand I can guess and cut up to 4 keys in doing so. Just wondering if you had a better idea since you have experience with this. Thanks for the answer.

[@christopherburgos8379]

Is use lockcodes.com / Fill online

[@OscarGarcia-ky2fr]

What about if the ignition is not the same as the door? How do you decode from switch?

[@thepeoplesreviewer7164]

Some ignition switches can be lishi picked but in other cases you have to remove ignition switch and disassemble, to carefully read wafers by wafer.

[@earthlyng_official4599]

thats what the decoding is for...