FC200 vs VVDI Multi-prog. The best Original ECU /TCU programmer under 1000 euros.

[@vladalexandrucojoc921]

New grafic with Plus and Minus, even the novice users understands the comparison. I had in mind the fc200 but i didn't buy it, i had writen you about the multiprog and now you made a great video. Thanks for your time that help us to see beter a tool .

[@YOYODiagnostic]

you are one of the subscribers who always posts. I got a lot of encouragement from you. I always try to keep in mind the demands of subscribers like you. This is my way of saying thank you to those who support me.

[@vastorana74]

Thank you again for your videos. I bought vvdi multiprog when released and have just seen unbox vids. So glad to see see a video with someone actually giving useful information. Keep up the great work. Very much enjoy what you do. Thank you

[@YOYODiagnostic]

Thanks for your support 👍

[@abreiz1]

Perfect timing Yoyo. It is like you heard me as I was confused about my purchase. Always informative, stright to the point and helpful. Keep the good work and Thanks a lot as always.

[@YOYODiagnostic]

My pleasure. 👍

[@medhamoud4492]

We really respect your hard work and your attitude to share that information and your knowledge. I hope you succeed in your life. All my respect

[@YOYODiagnostic]

Thank you. 😊

[@planetpowersteerings3502]

Thank you for the detailed comparison of the two tools. It is very helpful to have a side-by-side comparison to better understand the features and capabilities of each tool. I am working in an EPS rack repair service and am looking for a suitable tool that has EPS module MCU read and write capabilities. Can you suggest a tool that would be a good fit for my needs?

[@YOYODiagnostic]

Hi, I have no way to answer this question because I don't know which MCU is in these EPS. You should know better what MCUs are and then make a comparison with what these programmers offer.

[@nickmak3162]

Thanks for the video. I’m going to consider the multi prog, I wouldn’t have known about it if not for this video. Also learned about the VCX tool from your other video. Really helps to save money when starting a small business. Thank you

[@YOYODiagnostic]

👍

[@osvaldocostanogueira7171]

Great video, very clear and direct to the point. ❤

[@YOYODiagnostic]

Thanks 👍

[@Omar-mz2oz]

Thank you very much ! For your time and for your explanations! All your videos are great ! I was thinking to buy a cg9s12 thanks for open my eyes !!

[@YOYODiagnostic]

👍

[@scorcher617]

You had my support at unboxing videos I hate them always have for the reasons you said if you don’t how it works don’t show me I don’t want to learn with you , I want to know if it works and I like that you show us. Thanks

[@YOYODiagnostic]

@@scorcher617 Thanks for your support 👍

[@jamesgarrard4361]

Always you tell no bull shit and the most important details thanks YOYO

[@YOYODiagnostic]

@@jamesgarrard4361 👍

[@jackgates6949]

I use AT-200 (older version of FC-200) and only need for BMW DME ISN reading. Is there any advantage to this new VVVDI for me and my limited needs? Great video and LOVE the accent!

[@YOYODiagnostic]

No reason to buy it. 👍

[@jackgates6949]

@@YOYODiagnostic Thank you!!!!

[@markchin8044]

15:39 best part of the vid

[@albinoantoniojimenezparril4437]

muchas gracias por este video la compre el otro dia despues de ver tu video ahora queda seguir investigando muchas gracias por tomar tu tiempo en hacer este video muchas gracias y sigue asi ayudas a la gente para seguir trabajando

[@Deltarom]

Wish to see a comparison with Flex as well specially for Mercedes. Thanks.👍

[@YOYODiagnostic]

Ok.. I take it in mind and I will make sure one video with Flex too. 👍

[@franciscodiez5825]

Another Awesome video, thanks for sharing! Really appreciate all your videos, always looking forward to the next one. What program/software would you recommend for the checksum?

[@YOYODiagnostic]

I usually use it from the programmer. If I write with Flex i use that. If it doesn't work I go to tuning software. They are the best .

[@aboxofchocolates5901]

4:30 The names of the brand are in Chinese character order. I guess it is because the software was developed in Chinese first then translated into English.

[@YOYODiagnostic]

True. All these aftermarket programmers are Chinese companies. (Launch, Autel,VVDI, CG, Xtool, Topdon, Thinkdiag etc.)

[@Korstee]

Nice informative video as always. Kudos. The Multiprog support list contains Continental Simos 8.3xx ecu. But your comparison suggests that it is not supported. Can you confirm?

[@YOYODiagnostic]

@@Korstee lock when I make this video. All these companies are making a lot of updates every week or month. If I make a video 1 year ago it's not valid anymore. Always ask the company from where you want to buy that product 👍.

[@SpringvisualTk]

Amazing comparison, thank you so much, I never expected such detail comparing abilities per make!! Please continue if it’s not too much work, I bet you did it since you were curious yourself, I also invest a lot more time when I have personal interest comparing and researching Also, since you compare to FC200, I assume multi-prog does all by bench Feel free to ignore this: how important is checksum correction? Is it worth getting Kess/Flex just for that? (I’m a locksmith and rarely do ecu work)

[@YOYODiagnostic]

Exactly as you assumed, the first time I entered the menu to see what it can do. I don't enjoy talking about a programmer if I don't know what he does. I had 1 month to return it if it didn't cover my need. Thanks for watching 👍

[@miqbal1981]

another beautiful comparison👌

[@YOYODiagnostic]

👍

[@jaymoney4265]

I think the multi prog is great, but it seems like xhorse dropped the unit, but none of the solderless adapters that are offered with the mini prog and vvdi prog are not available yet. I asked support, but they don't give any answers.

[@YOYODiagnostic]

@@jaymoney4265 True the support is very bad. Thanks for info 👍

[@АбдуАбдушка]

Thank you for your video is very interesting and useful and tell me which one to choose multi prog more coverage works better

[@YOYODiagnostic]

It's up to you. If I have to decide I will go for Multiprog, but it's your money you must decide.

[@Chris-y4w8p]

Also can multiprog read locked rh850 on the vw clocks

[@eye-ann4937]

Maybe xtool vs SMOK coming soon?, keep up the good work, thanks

[@YOYODiagnostic]

I don't promise because I don't have Smok. But if I find a friend with this programmer I will.

[@siyaonline]

VVDI Multi-Prog is the best especially when you have an option of reading chips and MCU's and also be able to read immo data

[@YOYODiagnostic]

👍

[@diyleonmotors10]

Hello YOYO! Thanks for the Video! Another great information. keep up the good work! I have just one question for both programmers. Do the programmers do also a CVN (Calibration Verification Number) Correction when performing the Checksum Correction? CVN is important for the inspection in many Countries now since 2018.

[@YOYODiagnostic]

Hello. Not at the moment. I'm sure VVDI will have this option. This programmer has a good start.

[@Unbekannt-ov5gb]

Multi prog kann kein med Steuergeräte lese bereits ausprobiert 😢😢

[@YOYODiagnostic]

Danke für Info. 👍

[@Unbekannt-ov5gb]

@@YOYODiagnostic bitte heute kam ein Update runter und ich konnte med 9.1 lesen davor war es nicht möglich

[@YOYODiagnostic]

@@Unbekannt-ov5gb 👍

[@canoaslan1011]

Can you atleast do some unboxing for the fans at Christmas time?

[@YOYODiagnostic]

I promise you I will do unboxing but I will also make a test 😊

[@jorgemat8080]

I use the fc-200 and i have a question for you. On a bosch ME7.5 for Audi to do immo off when it asks to load pflash which file do i choose? When i read and save it read eeprom, flash, and extflash. There is no pflash. So i'm a little confused as it loads both eeprom and flash and accepts the file size. Thank you for any advice.

[@YOYODiagnostic]

This ECU has eeprom ST95040 external you can read separately . Or you can use eeprom ( DFlash) read with FC200

[@jorgemat8080]

@@YOYODiagnostic thank you.

[@YOYODiagnostic]

@@jorgemat8080 👍

[@robkerobke669]

I want to buy multiprog, but I don't know if it will work vag edc17/med17 data procęsing clone ecu.thanks for answer

[@YOYODiagnostic]

@@robkerobke669 for this job FC200 it's the cheapest programmer and make also. Checksum correction

[@islanddiagnostics3925]

If I had to choose between the HexProg or the Multi-Prog which one would be better?

[@YOYODiagnostic]

I don't have HexProg. Sorry I can't answer your question.

[@irfankhalifa5647]

@YOYODiagnostic Can this repair bmw/Mini FRM too?

[@Doctor_88]

Im interstend to

[@NGL_Voxify]

What functionality did you test? Just b/c they have big list means nothing ...fc200 cant do the lot of functions of listed ecus

[@YOYODiagnostic]

@@NGL_Voxify to be able to test all these ECUs I need one more life on this planet. when do you think I can test all the functions myself. I use several programmers and it is impossible.

[@NGL_Voxify]

@@YOYODiagnostic u make fun of people unboxing........what you, yourself reviewing on these units?

[@YOYODiagnostic]

@@NGL_Voxify I think you are talking without knowing. I buy my own testers and everything I use. I'm not paid to unpack products that I don't know how they work and then return them back. I'm not even a seller, I'm just a simple person who works in a company as a diagnostic technician. you don't like, change the channel, just like on TV.

[@HelgiThorisson]

Great comparison.

[@YOYODiagnostic]

Thanks

[@filipefernandes777]

Does the MULTIPROG do what the VVDI prog already did as well?

[@YOYODiagnostic]

Similarly, the only plus is ECU reading and writing

[@ADDAUTOMOBILESERVICES]

Pls what do you think about dc706 obdstar

[@YOYODiagnostic]

It's a bit more expensive than Vvdi so I wouldn't have a reason to buy something like that. Vvdi multiprog has a very large database when we talk about Eeprom and MCU. The second thing to mention is that I'm not an Android fan of programmers, I prefer Windows operating systems. To be able to modify those data, I always have to export the data to another device and after modifying it, copy it again. for me this is wasted time.

[@ADDAUTOMOBILESERVICES]

@@YOYODiagnostic thanks boss

[@ADDAUTOMOBILESERVICES]

@@YOYODiagnostic wish you can compare dc706 vs multi prog

[@YOYODiagnostic]

@@ADDAUTOMOBILESERVICES 👍

[@reirizjose]

Hi, do u know if multiprog can read and write bmw isn in ecu??, thanks

[@SpringvisualTk]

It will read and write, but not modify the data, they are working on custom scripts that can do things like that in a click, but it’s not ready yet. Read, send to a file editor person, write

[@reirizjose]

thanks a lot

[@Slo_poke300]

@@SpringvisualTkyou have someone that can correct the checksum of a modified file? Dodge rf hub is what I had issues with…

[@ucustanbass]

scripts are included in multiprog or have to buy after? thank you for your time.

[@mohamadosman1933]

I need ecu devices and mcu devive So you advice me to buy just multiprog or buy both of devices multi and fc200

[@YOYODiagnostic]

What you understand from this video?

[@alexn.2199]

Can you show differences between vvdi prog and multiprog

[@YOYODiagnostic]

Ok I will post a video soon. I have a video but no time for editing. 👍

[@Chris-y4w8p]

Which is best for reading bmw isn

[@YOYODiagnostic]

@@Chris-y4w8p FC 200

[@vvsousa]

Hello. Does this program work on airbag?

[@YOYODiagnostic]

Fc200 or VVDI

[@vvsousa]

@@YOYODiagnostic If the vvdi does rest in airbag. thanks

[@YOYODiagnostic]

@@vvsousa will be a next video. 👍

[@alexsandrolopes3388]

Muito bom seus videos as explicações me fala cg100x e um bom programador cpmrei multiprog poderia fazer u. Video sobre cg100x obrigado

[@YOYODiagnostic]

👍

[@8power0]

YOUR CHANNEL IS REALLY GOOD ,, I LIKE IT FOR THE TOOL COMPARISONS NEW SUBSCRIBER . I HAVE TO WATCH EVERY VIDEO ON THIS CHANNEL AND LOOKING FORWARD TO THE NEW VIDEOS THANKS SO MUCH FOR YOUR TIME !!!!!!!!!👍🏼👍🏼👍🏼

[@YOYODiagnostic]

Welcome to this community 👍.

[@daudajalloh6183]

Great video

[@YOYODiagnostic]

👍

[@AsadGamer]

Great video But a great advantage for fc200 for mercedes benz. The vgs-nag3 9g tronic that vvdi multiprog doesn't have. I hope it gets added in future updates to vvdi

[@YOYODiagnostic]

👍

[@mohamaditani451]

i bought fc200 2 days ago :(

[@YOYODiagnostic]

It's a good programmer too 👍.

[@BobbyGenevieve]

274 Miller Spurs

[@steveguflarkins4630]

3836 Sally Ford

[@YOYODiagnostic]

@@steveguflarkins4630 I don't understand

[@mtcarcare9077]

Which is best tool for read write of this ecus bosch md1cs08 &delphi dcm7.1ap &2.7ap&2.5

[@YOYODiagnostic]

Original or clone?