FCC patch for DJI RC, RC 2 and RC PRO, enabling PERMANENT MAX transmission power!

Permanent FCC mod for DJI RC and RC Pro! Works with Mini 3 and Mavic 3, enabling max transmission power in CE countries!
DISCLAIMER: Everything shown is for testing and educational purposes only, always chack local regulations!
DJI RC FCC.exe is a tool that allows to patch your radio and permanently enable FCC mode, so you can fly without fear of losing signal
Website
djircfcc.wixsite.com/dji-rc-fcc
❤️Follow me on Social❤️
/ rimzler
/ rimzler
/ rimzler
👕Get Rimzler™ wear and accessories!👕
teespring.com/stores/rimzlertm
⚔️Toss a coin to your Rimzler!⚔️
paypal.me/rimzlertech

[@Rimzler]

Server back online and mod compatible with latest updates! www.djircfcc.com/ Before updating/resetting your radio always make sure to double check if server is Online and if updates are compatible, if you don't do this you could lose the mod

[@papadsheli7851]

I can't connect to the server. I always get this error message: Error at hooking API "LoaddStringA" Dumping first 32 bytes: 48 8B 4C 48 58 08 48 89 70 10 57 48 83 EC 40 41 8B F9 49 8B D8 33 F6 4C 8D 40 E8 45 33 C9 89. what can I do?

[@druwidan]

hey, is it possible to sideload other apps after the FCC hack?

[@justinramell]

I did a quick test of this mod yesterday flying out at 30m altitude purposefully going behind trees to block the signal. My friend's CE mode Mini 3 managed to go 350m away behind the trees before loosing signal. Mine with the FCC mod managed 685m. Very happy!

[@ConDLJN]

GREAT!!!! Not only for the patch but also for his support!!

[@iandavis5189]

OMG!! Fantastic programme. I was getting 1200m, on average, in the suburbs on CE. After applying this FCC patch I'm getting about 3500m! I can't wait to try the countryside. I'm not computer literate and this guy took time exchanging emails with me till I got it done. Excellent service, nice guy and brilliant patch, well worth a few quid. 😊

[@GavinKacavenda]

Just done this with the latest DJI updates and it worked like a charm!!

[@Rimzler]

Thank you for the feedback ☺️☺️☺️

[@FazerWiz]

Did a quick range test today over an urban area. Prior to the update, I was getting only 300 meters before the signal became weak and got a disconnect at 330 meters. I just flew it in the same location after the mod and it went out to 630 meters before dropping to amber, I didn't bother going until I got a disconnect. That is a huge improvement over the pre-hack range and confirms that the controller really is in FCC mode. Tomorrow I'll fly it over some countryside, but I'm pretty sure I'll see it going out to a few km before it goes amber. Great hack thanks.

[@Rimzler]

Thank you so much for your feedback! Glad it improved your situation ☺️

[@ArboffFlies]

Pretty straight forward. They had some server issues but they resolved it really fast. Works like a charm. Just run the app first to register your drone SN, And rerun it to patch the drone.

[@alexis.x]

Any update? Will we have a hack? It's almost a month and server is still down.

[@RobWhittlestone]

I am glad you explained what the difference is! Excellent!

[@houariman]

22/11/22 I was a bit septic because I didn't see anything similar elsewhere but well, for 70$, I gave it a try and it worked flawlessly so thank you ! The person in the mail was very fast to respond and helpful. It was really easy to unlock FCC, it took me 10 minutes. I did a test fly yesterday in town so very bad environment and my range was super short. I did the same today after patching for FCC and the difference is incredible, muuuuuch longer range ! I hope we will be able to keep this mod for a long time :) Thanks again ! Houarican

[@Rimzler]

Thanks for sharing!☺️☺️

[@marco899]

I was one of the first to be skeptical and comment on the price but people change. I bought this this morning and had great support with the installation. Now waiting for an opportunity to test it but I'm happy with it.

[@Rimzler]

Thanks for the feedback!☺️

[@pietschipper54]

Hi Marco, voor een dubbele check in het nederlands . Is deze crack fake of werkt hij echt ?? Heb mavik 3 met nieuwste firmware ...

[@marco899]

@@pietschipper54 Deze patch werkt. Haal nu bijna 4km i.p.v. 3km maar kan dan ook gelijk weer terug daar je standaard accu niet verder komt.

[@blixineurope]

I did the hack yesterday on a Dji Rc Pro Using a Mac and Parallel. Had some problem running the hack but with exelent support from Andrea Zega I now fly my Mavic 3 in Fcc mode.

[@Rimzler]

Wow thanks for the kind words☺️ Happy flying!

[@Roisland]

Works, easy to install but it took some time to download the patch due to server connecrion failure. Massive improvement 🎉

[@droneeye_--_]

Does this mod unlock the ability to control lighting? After the last update on the mavic 3 classic, the backlighting only works automatically.

[@F-Stops]

Did this today in UK before I could only get 300m on my housing estate today nearly 1km and this is heavily built up area with WiFi interference so can’t wait to rest in the countryside soon, easy to setup, RTH works perfect still and I see no issues using this. thanks 😊

[@F-Stops]

Hi, I’ve only just got round to doing this again after the server being offline but when I run the tool it saw ‘installation prohibited’ and to contact support. The pass.txt file is in the folder with the exe I’m running and I’ve also tried running as admin but still no joy

[@mariusgag5014]

Works line a charm! Sometimes it’s a little work around but thanks to the almost instant support all is fine! Thanks, Merry Christmas!

[@jensludwig5251]

I definitely agree! its working great, its easy to do and support is fast and helpful. great job!!!!😍

[@jeroen2381]

I did install it and it works great my dji mini 3 pro. The installation was easy and the guide was usefull. It's expensive but worth it for me. Today I tested it and it fly's twice as far. The long range that I tested today is 2000m with full bars. I Love it :)

[@jeroen2381]

Anyone tested this with the new aircraft firmare v01.00.0400. The DJI RC-N1 controller go's to v04.14.0400 and the DJI RC go's v01.02.0000. My question does the FCC mod stays working??

[@AlexVgtb]

@@jeroen2381 I'd like to know as well!

[@Rimzler]

Yes it works with DJI rc new update! For rc pro have to wait a bit!

[@MrVuica]

@@Rimzler Please make a video about long range in the city and in the rural area.

[@jeanbouhnik]

The question is : How long are they going to support new firmware for free? are they going to move to a one year subscription model? in such case, it is very expensive. I asked such question but still waiting for an answer.

[@DroneLifeLelystad]

I feel like a kid in a candy store. I finally have my controller in FCCmode. I flew 3200m over my home town. And still had bars left in the orange. Before that i could fly up to 1670m 😍

[@javiermonardo2306]

Hi, buddy! Does this work with the RC-N1 controller the which comes along the DJI Mini 3 PRO? The one I'm about to buy is CE mode but I'm in Argentina and it is allowed to use the FCC mode. Thank you in advance!

[@RS-GLOP]

Did the RTH on this mod work properly and does the map display the correct position. Is it possible to revert back to CE if sent for repair?

[@sayayo9108]

Anyone.. Help me.. Why pop up installation is currently prohibited?..

[@philsmeanderings7991]

Thanks Mate ! Yes the CE signal is stupid low , Good Video and good luck with your mini 3.

[@Rimzler]

Thank you! Can't wait to have it back ahahah, i have to say ocusync is usable in CE mode, the old mavic mini was truly unusable over wifi!

[@koloterorita4006]

i already purchase this tool. and i follow step by step. but when re-run the patch after txt missing, the rc not rebooted. still not worked

[@herasymcuk]

Try again. disconnect the remote control. restart the remote control. connect it to your computer. start dji assistant, check that the remote control is connected by entering firmware check. Now run the.exe file again. If the process is successful, a message "fcc patch applied" will appear on the screen, pressing "ok" the remote control will restart.

[@mikeb5727]

Can you still set home location and does return to home still work ?

[@peterburgess20]

So this is the only real option if you have the mini 3 pro and the controller with built in screen right?

[@chriss8062]

I did it yesterday with a brand new Mini3 but ran into some Win11 driver issues. I had no idea what was going on, but Rimzlers support via Email was awesome and helped me to finally have my RC patched. Drone and RC were on latest firmware. Works like charm, thanks again for that man! :) Was well worth it! The range is now incredible!

[@chriss8062]

Update: Works after upgrading to NOV02 RC update too. :)

[@Rimzler]

Thank you!☺️☺️☺️

[@hachiman]

Got yesterday and after initial problem getting running and superb support i was up and running shortly after. 2500m today with Mini 3 Pro in built up area, whereas previously was lucky to get 800m.

[@chohs92]

This is a perfect solution. I've just tested a week ago and it worked well. The signal was increased and the drone was able to fly much farther with good signal.

[@gibiceps]

Hi, did you paid for that or did you used free Mavic air 2 fcc 1.0.0.apk. ?

[@chohs92]

@@gibiceps I purchased the one for DJI RC controller to use with mavic3

[@PRO-peller]

Mine is also in FCC mode! Big thanks to Rimzler! Easy to do, and works 100%

[@kennydimitra]

can you share me the files bro ?

[@PRO-peller]

@@kennydimitra the code is linked to the serial number of the drone I think. Just pay the 69$ and you will get it. You will also get help if needed.

[@User_cc]

@@kennydimitradont belive

[@kennydimitra]

@@User_cc why dude ? is that scam ?

[@gamingtech276]

@@kennydimitra it's down ATM

[@raizo476]

When there is new Firmware available to update, does it switch back to CE? If so, can I flash it back to FCC and keep the new Firmware?

[@Wheazul]

Hey man, is there any way of getting fcc with the latest software on rc2 for mini pro 4? I neeeeed itt

[@ShaiAharony]

Can anyone confirm if this is still working? thinking of buying a mini pro 3 but only if this can be applied as otherwise its useless for my needs

[@spteoh5253]

After upgrade the latest rc pro firmware, I reinstall the hack but error. Msg unable to send to maybe djircfcc.exe too old

[@Rimzler]

There are issues with drive sir, send a mail

[@lighthillIsrael]

Can a DJI Mini SE be connected to this mini 2 or 3 controller ?

[@op-1]

Hi I have been sent a replacement rc from dji When I try to patch it says patch prohibited. Can I transfer my licence to my new rc ?

[@LegendOfTheChief]

did anyone answer you on this ?

[@DroneLifeLelystad]

And yesss you guys did it again for me... Flying my Mini 4 pro with the RC2 Controller from CE to FCC mode. Much better signal better range. You guys are great thanks again❤

[@Wheazul]

Does it work with the latest software? 01.00.0310?

[@DroneLifeLelystad]

@@Wheazul Yes it does.A Very simple patch

[@Wheazul]

@@DroneLifeLelystad thanks for the quick reply, did you use the same link in the website? I noticed it specifically says it doesn’t work with that latest software version on the website, so did you just test it and it worked anyway? Just hesitant as i dont want to spend the $60 for it not to work It seems to say u can do the hack and then update to the latest software, but if im coming in with the latest software from the begining it wont work - is that what u did or did u do the hack and then udpate to latest software

[@Wheazul]

@@DroneLifeLelystad thanks for the quick reply, i noticed the website says it specifically doesnt have that latest version supported. When did you do it? And did you just risk it? Or did you do the mod and then update to the latest software afterwards? As it says that might work but not having the latest software and then doing the mod

[@ian2lorimer]

Will installing updates for the Dji flight App affect this once installed ?

[@kamikazekaos]

My mini3pro free fcc using RCN1 phone hack stopped working after the goggles etc firmware update, is this one also affect by it????

[@herasymcuk]

this mod works perfectly)))

[@rogerpgalli]

hello ! applying this patch I will continue to register flights on dji fly normally ? Will the flight logs continue? thanks

[@Rimzler]

Yes everything works normally!

[@benkekovax]

Does this work with the DJI RC with firmware 01.02.0200 or I have to update to a newer firmware?

[@peterburgess20]

Great product, I was a bit skepticle at first but so worth the money imo! i used to be able to get to 500m now since the FCC i just did my first flight at 1.7km! mind blown, great customer service too very patient 5*

[@mikeb5727]

Can you still set home location and does return to home still work ?

[@User_cc]

Liar

[@cesarespreafico6576]

ciao ma se ci sarà un aggiornamento firmware come bisogna comportarci? se si aggiorna il firmware basta replicare la pacht?? se si tua lo hai testato???grazie

[@herasymcuk]

Esattamente! Va eseguito nuovamente il file .exe... Da precisare che dji potrebbe "chiudere la porta" in uno dei prossimi fw. Quindi prima di aggiornare il radiocomando, andiamo a verificare sul sito se la patch è ancora compatibile.

[@claeseriksson8665]

I did install it and it works great. absolutely worth the money

[@alekappa]

just made a flight test today ... in a scenario where I have flown in the past, I have reached double the distance of the CE mode and I still had the full signal on the remote control ... FCC rulez! I'm definitely going to make a comment to the guy who called this hack a 'scam' without even trying it! IMHO the patch is a bit too pricey, I'm sure it was hard and challenging to succeed in the hack ... but consider that with a lower price there would be many many more pilots willing to buy it

[@herasymcuk]

Exactly, we should go en masse to comment on that youtuber for having slandered the developer of this wonderful fcc mode. Hoping he doesn't delete the comments as quickly as he did with me.

[@MrVuica]

Please make a video about long range in the city and in the rural area in FCC mode.

[@alvarobasurto2078]

Forget him, that's just a miserable looking for views and likes! He doesn't understand anything and luckily there aren't many who follow him!

[@raizo476]

Does this mod removes the altitude limit? Can it als go 500 meters up after this update?

[@pani.k]

Hello i have bought fcc mode and is still working! I have a mini 3 pro. If i will take the C0 label , will i lose the ffc mode?

[@FazerWiz]

I tried this today and it all seems to have worked fine, which is great! Haven't done any long-range tests yet but the controller certainly shows it's in FCC mode even when the drone updates its GPS point. Just a couple of things if I may: Will updating the controller firmware require a repatch? Also, will you let us know if future firmware updates stop working with the patch? Would be very nice if you did so we can avoid updating. Thanks!

[@Rimzler]

Yes updates require repatching, before updating always check the website, at the top there is written the latest compatible version, will try making it more clear btw so everybody is safe!

[@MrVuica]

When you do the long-range tests, share the information with us here or put it on youtube. Best regards!

[@lighthillIsrael]

I was also wondering about the SE, has it worked for anyone? (DJI mini SE)

[@freeflightfilms7403]

Nice vid, i use the FCC hack with the air 2 S, It takes about 5 seconds before flying and it was free theres no messing around with flight apps etc pure long range as far as you like before battery expires !

[@Rimzler]

Sadly with the radios with screen there is no free mod to use, but yeah FCC is needed to fly properly

[@chadgilmore5046]

Can I do this with my Smart controller version 1 for the GO.4 app

[@jeroen2381]

Anyone tested this with the new aircraft firmare v01.00.0400. The DJI RC-N1 controller go's to v04.14.0400 and the DJI RC go's v01.02.0000. My question does the FCC mod stays working??

[@Rimzler]

Yessir tested, it works but have to apply the patch again if you update!

[@ds2kx]

@@Rimzler Ok but, do you need paid every Update ? We need purchase th epatch every update ?

[@Rimzler]

Not at all, as long as the mod is compatible you can update for free

[@ds2kx]

@@Rimzler OK thanks. It is possible to switch between EU and FCC? Sometimes we can made official mission and EUR is mandatory. regards

[@andban92]

So,i unlocked my DJI RC to FCC,tested it,works perfectly great. Now i have a question: When there is new Firmware available to update,does it switch back to CE? If so,can i flas it back to FCC and keep the new Firmware?

[@fredericosantini7988]

Hi.. unfortunately my rc controller version is the one that doesn't work 🤷‍♂️. Any future updates that could fix this? Thx

[@Rimzler]

Hope soon will be available

[@ScowlerJase]

£60 is a bit too much. Slightly worried that you tell us how to hack it ….then tell us about your Mini 3 going out of control lol 😂

[@Rimzler]

The two events are not related, crashed because sensor bias😂 signal was perfect i watched the logs

[@ScowlerJase]

@@Rimzler ok good to know.

[@vintgant9295]

You can select another seller: 25$/ year😢

[@combatwombat71]

Will this work with firmware 02.04.2320 on an Air 2S and DJI RC? I (stupidly!) updated my firmware to use the DJI RC, and now I can't downgrade.

[@Rimzler]

It will work on the updated DJI Rc, not yet on the rc pro

[@Rimzler]

There is always a way to downgrade, contact [e-mail] if you need to do that

[@TOMMIB00ST]

New firmware just released 26/10/2022 will it work after this update?

[@christanti7411]

It will work - just contacted the developer - on DJI RC ---- The RC Pro is in progress

[@silvermarma4283]

Will this work on DJI mavic 3T (Thermal)

[@dvmourik]

Does it still works after updates or do we get a warranty that we get a new version if available?

[@Rimzler]

DJI may fix it, it's a risk you have to take into account, but as long as this doesn't happen you will be able to repatch if there are updates! Always be sure to check the website if the new updates are compatible, and also DJI assistant allows downgrading firmware! So after all there are many ways to keep flying FCC if DJI fixes it!

[@ionelciobanu5524]

Will this work with RC2 controller?

[@raizo476]

Are you sure it works perfectly on my dji mini 3 (NON PRO model) with dji rc smart controller with screen on latest firmware. Are you sure it will work bro?

[@timmy0811]

New updates are out 28/03 can you confirm compatable?

[@Fabio23145]

Hi, i'd know if its work again with dji fpv updated right now. Thank you.

[@juliuszwickler]

do you need wifi connection to use this after installing it?

[@luckychance8260]

Is it possible to activate fcc with mavic3 lte 4g equipment? If possible, I would like to purchase and use it right away.

[@Rimzler]

Yes it will work

[@mavichro]

Hi you know it works with Mavic 3T Enterprise drone?

[@andrearosaclot3145]

Ciao penso tu sia italiano. Cosa succede dopo un aggiornamento firmware? Bisogna ri petchare ? grazie

[@Rimzler]

Esattamente, consiglio di aggiornare sempre prima di patchare la prima volta (per i firmware futuri controlla sul sito se sono compatibili), dopo ogni aggiornamento l'fcc va via e basta ri patchare

[@Paule1911]

I think about buying the patch, but I wonder, what will be with the C1 certification of the Mavic 3. What do you think? Will DJI make problems?

[@Rimzler]

I don't think it will interfere with C1 certification, maybe get it and then mod

[@TheMavicz]

Can anyone test the power output on the rc controller

[@shotbyarian]

i already bought the fcc hack but can't download the .zip file anymore .. is there any way you can provide a link for that? thanks a lot!

[@jamieleelewis]

Doesnt work since the firmware update (goggle support) Basically made my drone unusable as i struggle to get 500m CE mode.

[@Rimzler]

UPDATE: IT NOW WORKS WITH DJI RC AND RC PRO WITH LATEST UPDATES!

[@MrVuica]

It's not a question of price, but before buying I'm interested in the range in urban and open areas. After that, I will make a purchase decision. No one has made such a video yet, and that's important to me.

[@Rimzler]

Guess I'll try making a video about it

[@MrVuica]

@@Rimzler 👍

[@andban92]

My max range on European standard(i guess S mode) was 2.3 km on clear field with not one single opsticle. I'm gonna try that out.

[@UKBUBBLERS]

Please do a video because my brain don't work that well with reading about it I will pick it up better if I see it. I don't mind the £60 if it works because it's such a pain here in the uk a few trees and it returns home lol. Great video my friend only come across this video as I just watched your latest one about dji care refresh and with my experience with them there the best customer service I've ever had. Still new subscriber here now 😁👍👌 🇬🇧

[@Rimzler]

Check this video out, will give you an idea on how it's installed! drive.google.com/file/d/1GW__mW7HNgdz6WD2QpdI8IHffoX_JglL/view?usp=drivesdk Thanks for the sub☺️

[@op-1]

❤❤I highly recommend this patch ❤❤ I have done 7km with my mini 3 pro today!! ❤❤ On default CE mode max was 700 meters lol

[@tohadmin5160]

10x 😮

[@gsvlogs4232]

I had the same situation with drifting drone!! The moment I start the drone it went left ,hit the roof, turned off and start falling. While falling drone decided to correct it self and hover. But instead of hover he flew left again and hit the house wall. Propellers was fucked , but magically everything else was working fine .

[@Rimzler]

You got lucky, it was an indoor bug, now is kinda fixed I believe

[@CyberDyne2012]

Thanks für the great video ;) What about the repair of your DJI Mini3 Pro you told in the video...has it worked without problems?

[@rayafif4895]

Hey man great with informatiom. I did some research that they said harware mini3 pro unit which they sell in canada and usa way better thet european and Asian sell in market. I live in Asia and the label on back on drone and RC Is CE . So do you know know that are there any diffrences in usa sell comparing with European sell or Asia sell. I dont know why i get feeling that USA sell might asseble and manufacture with better chip then the rest other region . I hope not. .So did you buy yours in europe right? You think this FCC patch for for any region right? I will be happy if you me me some heads up thanks Good luck

[@alekappa]

volevo sapere com'è andata con DJI per la riparazione del Mini 3 moddato

[@Rimzler]

Sto preparando un video a riguardo, in sintesi hanno analizzato i log di volo e riconosciuto la loro colpa, mi hanno mandato un drone e una batteria nuova gratuitamente!

[@cornelisbaan6685]

Is it working on the smart controller on firmware 01.03.0400 with the 3 mini Pro?

[@Rimzler]

Yes it works with it finally

[@JaraFPV]

69USD!? No thanks. That's 3.9k PHP already, here in our country.

[@Rimzler]

Soon someone will make a cheaper version for sure, or DJI will fix it maybe lol

[@bigkells135]

Hi mate I've got the DJI RC2 version 02.02.0000 can this be done?

[@TOMMIB00ST]

Will it still work with app version 1.8.0 and rc version v01.02.0100?

[@Rimzler]

Yessir!

[@freeflightfilms7403]

And another tip, I use Litchi and fly VR, much better in sunlight for more precise flying, use Samsung oculus goggles I adapted and a Samsung S10 plus phone, it's great. Litchi has far more settings than the Fly ap. I dont Belive I could do this with the Mavic 3 as sdk not released...

[@ojoenelcielo6416]

Works perfectly, just follow the instructions exactly.

[@dimitarnaydenov90]

Hi Do you think there will be a way for DJI mini 4 pro rc 10x

[@Rimzler]

Hopefully soon ahahah

[@marcocatalano4220]

Ciao, é possibile metterci in contatto? Vorrei commutare il mio Controller per Mavic 3 Pro con display integrato, da CE a FCC (se possibile), grazie.

[@Rimzler]

Salve, deve inviare una mail a [e-mail]

[@germanweldpoint3005]

It works 100%

[@banyas10]

is the hack work on the new Mavic 3 pro with the rc pro or the rc?

[@DusanVucenovic]

Sever is online again ! Im back on FCC Mode.. (work with newest Version!) thank you Rimzler!

[@DAFlys]

Lucky, I just get connect failed or Installation Prohibited from it.

[@timmy0811]

@@DAFlys it works...takes a while and keeps trying, takes a few mins..back in action :)

[@DAFlys]

@@timmy0811 Been trying for 4 hours sold. when it does manage to connect either installation is prohibited or send failed.

[@thechirita]

It works with 01.02.0400 ? Just want to double check since on the website it’s not updated to support the latest firmware!

[@mr.z2618]

69US is to way much. There is App on mavic drone forum. Free of charge, you just connect your mobile to controller and click one button. The issue is you need to do each time you power your drone.

[@Rimzler]

Sadly does not work for DJI RC I tried

[@mr.z2618]

@@Rimzler It does. You connect to your drone with RC-N1 change to FCC using app, pair again to you DJI RC.

[@leffep]

@@mr.z2618 Problem is not many has both controllers, and if you bought it with the RC DJI don't sell the N1 separately :(

[@Rimzler]

I have both and tried, it works but it takes so long and carrying 2 radios it's a pain considering you have to do the whole process before each flight! I work and need something quick to deploy!

[@kamikazekaos]

Don't worry this will become free 😉 just wait for it like most lol

[@marco899]

Is it safe to update to firmware DJI RC V01.02.0300 and keep the hack?

[@Rimzler]

Always make sure to check the website! New firmware is not compatible yet and server is offline, don't update or you lose the FCC! Hope everything will be fixed soon

[@vanair]

I did it. Installation Win10: First start the DJI RC FCC.exe -> Message re-run program -> restart -> after a few seconds the CMD-Window was closed without a message -> Look in the Downloadfolder -> the file pass.txt is missing -> download pass.txt again, restart DJI RC FCC.exe, than succes, the DJI RC was restarted. Later, after a manual reboot of the DJI RC the Device ask me for access to the GPS Data -> YES. Flight Test TODAY: More Range, better Video without freeze, everything works fine. THANK YOU. Its expensive but it is worth!

[@Rimzler]

Thank you for sharing your experience ☺️ sometimes it can be a bit finniky to activate, but once done you can really feel the difference in signal strength!

[@User_cc]

Dont belive

[@iluvass2]

nice video .. im from in india and there is height limit can it bypass as well??

[@Rimzler]

Height limit cannot be bypassed I'm sorry 😔

[@ErikPape]

Before buying this (as it's rather expensive), I would love to see a real comparison of before and after, and with the newest firmware ;-)

[@Rimzler]

There are plenty of comparisons between CE and FCC modes on KZbin, check them out!

[@ErikPape]

@@Rimzler But not with the DJI RC ;-)

[@Rimzler]

I don't know how to test it scientifically without going many kms out which I don't want to do ahahahah, the power output goes from 25mw to 400mw in 5.8ghz and from 100mw to 1000/1300 in 2.4ghz, so the power gain is very significant

[@herasymcuk]

We have all spent more than 1300 dollars to buy a dji mini 3 pro rc with dji care refresh and fly more kit .... should we have problems for 69 $? lol The cost of two pizzas at the restaurant? The ffc signal should arouse interest not so much for the longer flight distance of the drone, but for the exceptional stability of the signal, even in hidden areas.

[@LucianComanphotography]

are plenty others what sell for 20 usd, obviously this gu did not do his home work, is a rippoff

[@alvarobasurto2078]

Hi Andrea, Is it true that RTH doesn't work with this mod?

[@chucklemub]

no it works

[@cargonausorus]

Have you tested the RTH? is it functional after the dubious Hack car to pay so much if it causes concern?

[@aguitasvaldisneuf3391]

What do you mean with "RTT"? Or do you mean RTH (Return To Home)

[@cargonausorus]

yes RTH

[@Rimzler]

On DJI rc no issues

[@benkekovax]

Is this method still working with the latest drone/RC firmwares? 🤔

[@kentrygve]

I can confirm that the hack is still working. Bought it today and programmed my DJI RC. I'm on the latest firmware. RC firmware 01.03.0100