Maximising Your Range on DJI Mini 2: A Guide to the FCC Hack 2023 (work for ALL DJI Drones)

This FCC Hack is available for temporarily switching your DJI Mini 2 from CE into FCC mode with RC-N1 to cure bad range in wifi-polluted areas. This is the 2023 updated version of HOW TO FIX MAVIC MINI BAD RANGE, and the cool part is it works for ALL DJI Drones using the RC-N1 controller on Android.
This FCC Hack works now 😱 Video Review Drone-Tweaks FCC mod 😱
• How to FIX Bad Signal ...
✅ FCC mod for DJI Fly for iOS
www.drone-twea...
✅ FCC mod for DJI Fly for Android
www.drone-twea...
⚠ IMPORTANT / DISCLAIMER ⚠
Experimenting with FCC mods can void your warranty and care refresh agreement with DJI.
This video is only for educational purposes, and flying your drone in FCC mode outside the US may violate local regulations, so use information from this video at your own risk.
Mavic Pilots Forum Post ⚠ Switch to FCC mode using an android app ⚠
mavicpilots.co...
✅ DRONES UNDER 250G
DJI MINI 2 - amzn.to/3YNn4DS
DJI MINI 3 Pro - amzn.to/3HSw6sB
AUTEL EVO NANO PLUS - amzn.to/3YGjA60
✅ PROFESSIONAL DRONES
DJI MAVIC 3 CLASSIC - amzn.to/3K8gm7D
✅ ACTIONS CAMERAS
GOPRO MAX - amzn.to/3HW2kDl
GOPRO HERO 11- amzn.to/3HSwnf7
INSTA360 X3 - www.insta360.c...
INSTA360 ONE X2 - www.insta360.c...
✅ AUDIO ON THE GO
ZOOM F2 DYNAMIC FIELD RECORDER - amzn.to/3E3WiPF
DJI MIC - WIRELESS KIT- amzn.to/3K45WWC
✅ AUDIO IN STUDIO
SENNHEISER MKE 600 SHOTGUN - amzn.to/3xjWtmo
SONY XLR-K3M - amzn.to/3RUGzbu
✅ MIRRORLESS SETUP
Sony A7C Body Only - amzn.to/3Ikocth
Sony A7Siii Body Only - amzn.to/3XsQgPJ
✅ LENS COLLECTION
Sony 24mm F1,4 GM - amzn.to/3K71Soj
Sony 16-35 mm F4 - amzn.to/3lyjyPC
Sony 24-124 mm F4 fixed aperture - amzn.to/3K3THch
Sony FE 90mm Macro - amzn.to/3E2lfem
✅ STUDIO LIGHTS
FalconEyes RX-12T Flexible LED Light - amzn.to/3HSxlYN
APUTURE LS C120D Mark 2 120D II - amzn.to/40OOPhh
APUTURE LIGHT DOME II - amzn.to/3JY33Xc
✅ SD-CARD for SONY ALPHA MIRRORLESS
Sony CEA-G160T - 160GB CFexpress Type A - amzn.to/3xkIFI4
⬇️ SD-CARD for your DJI Drone
SanDisk Extreme PRO 64GB V30 A2 microSDXC:
🇺🇸 US: amzn.to/3l2I59p
🇬🇧 UK: amzn.to/3fBKiHJ
🇩🇪 DE: amzn.to/2V3PsTi
SanDisk Extreme PRO 128GB V30 A2 microSDXC: (RECOMMENDED)
🇺🇸 US: amzn.to/3m6ayMP
🇬🇧 UK: amzn.to/360zDDj
🇩🇪 DE: amzn.to/2Jc1WWk
-- IMPORTANT --
Some links in this description may contain one or more affiliate links for items mentioned in my videos. You will support my channel if you use these links, as I will get a small commission on the sale. The price is the same for you, and it will help the continuous growth of the channel. Affiliate links are primarily Amazon & DJI, but not limited to.
Hashtags for video:
#djimini2 #djimini2fcchack #fcchack

[@TECHDRONEMEDIA]

This FCC Hack works now 😱 Video Review Drone-Tweaks FCC mod 😱 kzbin.info/www/bejne/hnubeH5nntF1odE ✅ *FCC mod for DJI Fly for iOS* www.drone-tweaks.com/product-page/fcc-fly-ios?ref=w599q03g ✅ *FCC mod for DJI Fly for Android* www.drone-tweaks.com/product-page/fcc-mod-for-dji-fly-for-android?ref=w599q03g

[@88alexandru88]

I can confirm that it works on mini 2 SE on the latest firmware 🎉, it makes a huge difference in transmission stability!

[@victoirethondo2922]

Hi friend, does it still works for the mini 2 se ? Mine just won't install the new version, is it because of the mini 4 firmware or there is no corelation ? Have a good fly

[@88alexandru88]

@@victoirethondo2922 still works for me, haven't updated since then, and I advice not to update the firmware because might not work anymore after. Have a great day!

[@georgemoustakas271]

Great tip..... For sure we need it for the mini3 with the RC !!!!!!! Thanks for your support on this !!!!!!

[@MatthewLenton]

If you have this controller for the Mini 3, you can do the same thing and would just need to pair the RC remote after and the drone stays in FCC mode. You would need the two different controllers and it would take a little longer I'm not sure whether it would be cheaper just to pay someone for the permanent hack. I did see a video where someone had sent the drone back for repair and it had been flown in FCC mode, but DJI didn't care

[@DJIDroneTravel]

For RC you can follow this video the one he might do is for other remote control with display 👍

[@stst8301]

This video and hack is for the magnificent Dji Mini 2

[@MatthewLenton]

@@stst8301 It does also work for the Mini 3

[@TECHDRONEMEDIA]

Mavic Pilots Forum Post ⚠ Switch to FCC mode using an android app ⚠ mavicpilots.com/threads/mavic-air-2-switch-to-fcc-mode-using-an-android-app.115027/

[@P455x3]

Is that mod works for mini 2se to ??

[@tanushreestudio7589]

@@P455x3 same questions ever

[@andreass.7152]

​@@P455x3yes

[@aungaungkp1997]

How about now Link still ok?

[@kennethsejberg9909]

Please show how it works on a DJI Mini 3 Pro og and the DJI RC :D

[@jarroddawson2181]

From South Africa, was extremely disappointed with the range on my Mini 3 Pro. Saw your Video now, tried the fix and it works like a Charm👌🙌 Instantly more than doubled the range. Thank you!!!

[@TECHDRONEMEDIA]

great it could help

[@rossermatthew]

@@TECHDRONEMEDIADoes this work on RC controller ?

[@Jerry.V]

Yooo man, what was the range before and after you installed it?

[@GeorgeFoxCinematography]

Yes ,it does not work anymore😐, AIR 2,2S and Mini 2 have no issues. It still works.

[@ThisIsTenou]

"it does not work anymore" "it still works" You're giving mixed signals bro

[@Lee.gRC27]

So glad I found this information as I live in a built up area and my signal range is shocking,,

[@bogunio]

Great vid. I am using this patch from two month and without this i had possibility to fly about 1,2 km in high urban place, and with patch more than 2 km - great

[@daniell7226]

Czy ten patch jest na stałe? Czy trzeba go za każdym razem jakoś uruchamiać.?

[@bogunio]

Ten patch nie jest trwały. Znika po każdym wyłączeniu kontrolera i drona I trzeba ponownie go uruchomić.

[@daniell7226]

Właśnie zainstalowałam i zauważyłem. Narazie sprawdzam w domu bo jest silny wiatr na mini 2. Zobaczmy czy będzie działać. Mam stara wersję frimware 1.3.000 i dji fly ce 1.6.12 ale widzę że jakiś problem z uprawnieniami się zrobił. Choć większy poroblem mam z błędem kalibracji gimbal. Gdzieś widzalem film jak wgrać sofy żeny tego się pozbyć ale nie mam odpowiednich plików. U mnie to błąd systemowy. Wracając do patch fcc gdzieś czytalem na yt że niektórym zostało na stałe fcc ale nie wiem na jakiej wersji firmware.

[@pembswales]

Good Video please do a video how to add to RC Pro or Rc controller

[@radekjoch8082]

Thanks for the great guide. Works on DJI MINI 3, tested today.

[@eenig8730]

What firmware do you have for controller and aircraft

[@EITSUK]

not working on mini 3 01.00.0200

[@r.3424]

​@@EITSUK succesfully dowgrades Mini 3 firmware to V01.00.0100 using DJI Assistant 2 for consumer drones. FCC hack working fine in Mini 3

[@robertmatejka8306]

Thanks for the tutorial, FCC also works with the mini 2 SE, after a reboot it's back to CE Warranty remains, it's great that it's back to CE after a reboot

[@walimakani1741]

hi, may i ask if the apk link worked for u as i tried to access it but it said it didn't exist

[@AramBasmadjian-wz1wj]

nope it doesnt work for me also@@walimakani1741

[@88alexandru88]

I got the apk stored locally on my pc.. I was sure this was going to happen..

[@88alexandru88]

Do not update the firmware on the remote or drone

[@robertmatejka8306]

​@@88alexandru88 I assure that the FCC of the bottom USB port also works with the new dji fly 1.12.8 + Aircraft firmware: v01.00.0410 (DJI mini2SE) DJI RC-N1 Remote Controller Firmware: v04.11.0400

[@alloaphotographers6513]

Anyone got a link for the file looks like its been taken down

[@DJIDroneTravel]

Please do one for mini 3 pro too 😎

[@cpjhardware991]

Also works on mini 3 pro

[@jonesboy2004]

​@@cpjhardware991not anymore. Have you used it recently? Thanks

[@Jerry.V]

Yooo man, did it work?

[@tribar-6886]

Please do one for mini 3 pro with the DJI RC too

[@LISTEDGames]

it doesn't work on the newer rc only the n1

[@marz9408]

Works on Mini 3 👍

[@eenig8730]

​@@marz9408it dont work on my mini 3 and rc-n1 controller. What am i doing wrong ?

[@nathanhassani5366]

So I’m screwed as I own an iPhone and not android.

[@Teflonfilmare]

Drone tweaks does that for €38 annually I believe

[@123Bink]

Your reply to the question, can the Mini 3 Pro and DJI RC controller be updated to FCC mode, is '"just pair the RC after it has been connected first like shown in the video" Please can you expand on that (as I do not follow) or put out another video. Thanks. Reply

[@jimthorleydronefootage]

Great video bud and you can put it on a rcm330 by binding while the patch is on the drone I done a small video on my channel the other day 👍

[@brucehare3763]

That is a brilliant video. Thank you as always 👍🏼👍🏼

[@TECHDRONEMEDIA]

Glad you enjoyed it

[@vanvugtdronecinematography7769]

Great tip Henrik! Thank you very much. I'm gonna test it out very soon 🤗

[@fullhd1080]

Lets get the video up for the mini 3.

[@Patrick..33]

Did you test it on the Mavic 3 Classic with a RC-N1 ?

[@russ5293]

Hello, do you have any hacks for my air 2 underlight so i can turn it on and off via the dji app? i am in Ferteventura and want it so i can use my fishing line dropper via the function button when i fish at sea. ty

[@DanielJLopes]

Interesting to know, but I don't think I would be using it in any way. In case of loss of signal, I would rather wait for the RTH to kick in, and most of the times I dont fly under 40% Battery to have plenty of buffer with my mini2 :)

[@ukdronelife]

Excellent 👍🏻

[@mihaildorian]

iT DOESN'T WORK ANYMORE FROM TODAY because of drone(M3) firmware update !!!😡😡

[@daniell7226]

What exactly rcn1 04.11.0400 controller update or frimware 01.06.0200?

[@user-uc2dk1vp6e]

Wrong

[@daniell7226]

@@user-uc2dk1vp6e?

[@rolandgrohs9118]

@@daniell7226Heuh

[@GoodVidMode]

I am saving up for the mini 2

[@PhreddCrintt]

Brilliant. Thank you Henrick - most interesting! 😉

[@PhreddCrintt]

I forgot to add Henrick... Can you show us how to update the RC controller sometime please?? Thank you in advance! 🤗

[@MrIcemanDenmark]

Hopefully this free fix would come to IPhone too

[@PacificOceanQuest]

I live in the USA so I guess this doesn’t apply to me 😂

[@monacocross4241]

this method work mini 3 ? thanks

[@mhmod1994]

It did work on M3P thanks you!!

[@Teflonfilmare]

It does work in Mini 3 Pro with DJI RC-N1 controller though 😂

[@thomasskovbjerg6713]

Hej Henrik Ved du om/hvor der findes et fcc hack til mini 3 pro med rc remote? Betalt eller gratis er ligemeget, så længe det virker. Skal kunne klares fra iPhone eller Windows pc. På forhånd tak

[@radekjoch8082]

Unfortunately, after the last firmware update a week ago, it no longer works. :-( DJI, Mini 3.

[@r.3424]

succesfully dowgraded Mini 3 firmware to V01.00.0100 using DJI Assistant 2 for consumer drones. FCC hack working fine in my Mini 3

[@paullthomas8064]

Thank you! Happy Flying

[@TECHDRONEMEDIA]

Thank you too!

[@oO360GamingOo]

Doesnt work anymore with the new update. Only via drone tweaks

[@daniell7226]

Try in dji asistsnt 2 to downgrade to 01.06.0200. What rcn1 04.11.0400 controller version do you have? Write if it helped and works.

[@basretie5179]

So i download the apk .... then connect the drone with controller.... (on old DJIFly ? ) Or ... i download the apk .. install it on your phone... then putt USB-C to bottem of controller... ?

[@international187]

You can also do this hack with the mini3 and the New RC

[@rogermorered]

How ?

[@TECHDRONEMEDIA]

just pair the RC after it has been connected first like shown in the video

[@Joka96]

Why i am the only one with ffc mode but 90 db mark is below line od 90 db? I saw no one have like that. On left corner line is not straight to 90 db, its below 90, above mark is one little line which is on 90 db. That mark is also below 90 db on CE mode, but it should be straight like what all ppls have.

[@electric-rider]

Hi. Thanks for this video. You said that it works with the Mini 3 pro ? Can you tell us how ? Best regards

[@TECHDRONEMEDIA]

just pair the RC after it has been connected first like shown in the video

[@DJIDroneTravel]

@@TECHDRONEMEDIA Will it work for the new remote control too? That mini 3 pro comes with the display?

[@jimthorleydronefootage]

@@DJIDroneTravel yes

[@edwardrushton132]

Could this hack/ software be used on the orginal Mavic Air. I have no reason to upgrade the drone as it serves my purposes, but do have issues with signal strength sometimes when it is not that far away. There have been pervious ways to switch but these have all been stopped through various updates from DJI to my knowledge.

[@jimthorleydronefootage]

@Edward Rushton you can only try Edward if it can't do it the patch on your phone will say its failed bud

[@danielhenderson7050]

Doesn't work on Mini 2 SE on 01.00.0410 firmware. When removing the cable from the controller and inserting it into the bottom controller port, no notification is seen.

[@theflyer498]

In other videos it has been shown that FCC hacks do not work. You need to measure the real antenna strength before and after FCC hack. That's determines signal strength in 5.4 or 2.8 frequency.

[@Matanumi]

It seems to help though

[@venox48]

Will faking GPS position enable FCC on mini 1 ? Will it fly correctly I mean will it hold position or the drone will want to fly to the USA ?

[@70Marc]

Wow, sweet. I was just thinking about paying for an app to do this, but am thankful to you so that I may try it first.

[@70Marc]

Never mind. Live in 🇨🇦 and I’m already at max fcc rules, I guess. Was hoping this hack would help as I often get weak or lost signals.

[@6pack1204]

I use the 'mavic air 2 fcc' app for my Mini 2, but lately it's always in FCC. It doesn't go back to CE after controller reboot. I living in CE area. Is there a way to go back to CE ?

[@Ard1400]

Thanks for the video. Dos it works with the Spark?

[@Frammore]

It worked, thanks you very much!

[@Sebelino]

It works well on the Mini 2 and Air 2s that have the RC-N1 remote. Does it also work with the RC-N2 remote control??? 😮

[@daniell7226]

What kind of drone company do you have? And what rc controller version? Does the mod still work on 01.06.0200 and rcn1 04.11.0400?

[@GoodVidMode]

wow

[@AncalimeNL]

Henrik, when I bought the mini 2 two years ago, it stated that it's range is 10km. I was wondering, does this 1 km mark mean that I can not fly the drone further than about-ish 1 km???

[@SuppanReviews]

Bro, mine was going far when I bought it but with many recent firmware updates, It losses range within 250meters, 5G no more works properly, So, I always fly in 2G mode which gives me about 500meter, I never flown far. Hopefully this hack helps me fix the signal issue

[@chris-rg4hy]

im in australia and get 3.5 kilometers without fcc mode, will try the hack and see if i notice anything. mini 2 and mini 1 i own and both get 3.5kilometers with the slip on yagi 5 element beams. i have never flown without them, 3.5 is fun!

[@J.C.180]

Update?

[@Matanumi]

Australia is FCC anyway. Its new Zealand that's CE

[@Bundesregierung_Deutschland]

I think it's not true.. u can see the strength from EC 2,4Ghz and FCC 5,8GHz. But u also can switch it by the fly App. No need other app

[@TheKryten1st]

This would not work on my old Samsung Galaxy S7 that I use for my mini 2 with micro USB but worked without issue on my S10 with USB type C. I tried many times with different cables but it will not detect the remote at all with micro USB connected to the bottom of the remote. Many thanks for this Henrik .

[@richardpendley3454]

Get the adapter from Android to c port its a small attachment the sometimes selll them at the gas station

[@dronelabitaly]

Hi for the FCC on a Old Mavic Air??? Fake GPS don't work on last DJI go 4 version. Tony.

[@mukeskinoglu]

How i will do that for MINI SE? Controller dont have second usb port.

[@michaelboot]

Different hacks, look up hack for se

[@michaelboot]

Different hacks, look up hack for se

[@mukeskinoglu]

@@michaelboot i couldnt find any video about dji mini se

[@Pospiech_ATV]

Will this work with Mavic Air1? If not, do you have a solution for Mavic Air1? I've been using the method that uses a Fake GPS app, but the problem is that despite the visible change of location in DJI Go 4, I still have CE. Apparently, I would have to have DJI Go 4 max version 4.2.8. Unfortunately, I will not install it on newer versions of Android.

[@fitz-patrickfamilyuk9661]

Me too. Mavic Air 1 now locked into CE.

[@j.bojrgensen4260]

Hvorfor udtrykker du det ikke klart, at i eu må du kun flyve i ce ? Hvorfor friste til fcc ?

[@Hufmaster]

After new firmware update my mini 2 stays in fcc, also after disconnection. Anyone else this 'problem' ?

[@joyindeeamornchai754]

My mini 2 stayed in FCC too

[@daniell7226]

​@@joyindeeamornchai754to źle? Chyba dobrze. Jaka to aktualizacja i dji fly?

[@daniell7226]

It's nice when you have fcc all the time, you don't have to rearrange the cable. What update is the drone version and controller version and what dji fjy? Do you have a mini 2?

[@henyr8464]

Does it work if I have a Motorola because everytime I plug it in to the bottom of the controller it doesn't show up

[@anoopthekkekuttu]

Excellent.... Can you please do it for mini 3 pro too....? TIA.

[@damianwyczakowski2491]

Ok , it work but I dont test this in Flight yet. I can fly more than 500 meters high with this Mode???

[@zonhisham]

Please show how to do the FCC hack on a Dji RC

[@zonhisham]

when ppl like you refused to respond, then it is time to unsubscribe. ciao.

[@MB2kbps]

Which dji app firmware are you running for the mini 2? 🤔

[@Cassius..]

Im using a mini 3pro i got the FCC app but i was a bit confused. The bar was under the 100 line and the 90 bar was just under the 1km but looking at your video of it. It is exactly what you said in the vid does that mean that it’s in FCC mode as others say it has to line up with the 100 bar and just below the 90 thank you so much.

[@fury930]

But the range and singal strength is so! much stronger in FCC mode. Flying in CE is actually more risky as the signal is weaker. Regardless of vlos. I've had issues flying only a few 100 meters over some fields on ce and lost singal and had to mission to find drone.

[@dutchdronedimension6703]

hi hi, as a real drone pro as you are i have a question, is it save to charge my dji mini 2 battery (3 pack) with a high power charger 64Watt ? hope you can help me, cant find anything about it on internet

[@TECHDRONEMEDIA]

yes no issues it will not draw more power than it needs

[@dutchdronedimension6703]

thxxxxx sir for the information, and keep on going with you channel

[@boyanracing]

Dji mini 2 now firmware update to 01.060.0000, if it's been updated, can it still be hacked with the mavic 2 fcc software for fcc mode ?

[@poglavarcek]

Yes, the patch it's works with fw 01.060.0000

[@daniell7226]

Czy działa na wersji kontrolera rcn1 04.11.0400? Bo taka sama jest w aktualizacji 01.07.200. To w 01.07.200 działa czy trzeba obniżyć do 01.06.0200 i rcn1 04.11.0400?

[@grantgreenwood522]

Works a treat on air 2s, shame you have to go through the same process every time you change the battery though.

[@ianmcat]

Doesn't work for a Mini 3 Pro and DJI RC controller. Dont get the C5 prompt.

[@Teccie46]

I have the mavic mini pro 4 and cant get further than 1.4k. I am stable at -86 ce mode in thailand and get a max of 1km, yet when i used a vpn set to a fcc country i got to -95 and increased my range to 1.4km. But cant get any more, even when in the open on the beach front with noone around. Would love to get further.

[@ANDRONETEC]

Good🤩

[@sulidar17]

is there a way we can do this on an IOS device?

[@kpappa]

Not working anymore on Mini 3 PRO with the latest firmware !!

[@asfakahamed4808]

Kindly provide a solution to remove height restrictions... please

[@jarroddawson2181]

Do we know if there is an app for IPhone yet that can do the same thing?

[@Teflonfilmare]

Drone tweaks for €38 annually I believe

[@pipleo6313]

Just tried on mini 2 but the patch doesn't automatically appear so won't work sadly

[@TECHDRONEMEDIA]

I have not tried it lately so I will have to check it in

[@pipleo6313]

@@TECHDRONEMEDIA ps I love you're channel. We have been running one the few aerial photography companies that transitioned from real helicopter to quadcopter before anyone knew what the term "drone" was. You're channel is always informative and along with some mild humour and good knowledge is very easy to watch. Thank you for sharing

[@jonesboy2004]

​@@TECHDRONEMEDIAplease recheck as I think it has stopped working now since new firmware

[@dotslashsatan]

Is this because 2.4GHz in the uk is limited to 10dBm?

[@e.magic.7194]

It works thank you

[@spicygaming8779]

Mine 9 was already at below 1km? And it was written CE below the battery door?

[@jungleboy9007]

Hello team... I have tried to install the apk for fcc mode from this link a couple of times, but I can't do it. The mobile phone is Huawei Mate 40 pro and the drone is Dji Mini 2. I download the fcc apk to my mobile phone. Then I connect the controller and the drone through the dji application on my mobile phone. Everything works there. Then I pull the cable out of the top port on the controller and put it into the bottom port on the controller. And there the controller cannot be connected to the drone. It says that the drone is not connected and I still can't do anything. When I put the cable back in the upper input of the controller, everything works normally. Does anyone know what the problem is?

[@danielhenderson7050]

same

[@zakas2]

Does this hack make any trouble with home point? If I loose signal and drone kick's in rth it will come back to start point and not fly away to usa? Thanks

[@larkinsen]

You can always cancel RTH and bring it back manually.

[@youtubetruthlife4750]

dude, he pointed out "if I loose signal".. you cant control drone and fly back manually 😂@@larkinsen

[@arcymax7291]

hi good work but I wanted to ask if it works with dji mini 1?

[@J2onton]

My UK mini 2 has full signal strength. My max height is set to 392 feet, max. Just a thought, could the DJI mini 2 have the range adjust to CE mode if the max height is set to more than 400 feet, 120 mtrs?

[@petelivinlarge]

I've just come across this video. Does anybody know if this works with Air 2S using DJI Fly version 1.10.1

[@raffaut81]

Is the hack only stored in controller and not on Drone itself. Just wondering in case I need to send drone in after a crash to DJI under refresh cover?

[@TECHDRONEMEDIA]

In the controller

[@daniell7226]

Czy fcc w mini 2 działa na stałe? Czy się przełącza w ce jak to późnej włączyć w fcc moja wersja frimware 1.3.000 dji fly 1.6.12.

[@daniell7226]

Does this mod work on the older version 1.3.000 and dji fly 1.7.5. How to apply it, are there any problems with the warranty after uploading it? Are there any other disadvantages.

[@kevofpv]

is this still possible in 2024?

[@daniell7226]

Kupiłem trochę dłuższy kabel 0.5 metra. Kabel tech 100 w z power delivery 480. Kabel ten nie działa jak podłączam telefon z kontrolerem. Wyskakuje napis na telefonie ładowanie sprawdź kable. Mój tel to samosumg s20 fe. Dlaczego na twoim kablu w tym filmie działa połączenie? Może trzeba coś włączyć w telefonie.

[@daniell7226]

Czy da się zrobić na stałe tryb fcc w mini 2? Chce zamówić dłuższy kabel usb c do c może jakiś lepszy z power delivery. Czy będzie działać połączenie? Na filmie widać że masz inny kabel i działa. Do jakiego numeru frimware działa patch.

[@crowbaril903]

How do I wire in line a better light with the mini 2’s front squinter

[@antoinechangeur3729]

Hi, does it work only with dji fly or also with litchi app or dronelink?

[@guillemgf4285]

Whith the latest update .200 in mini3 nopro, the hack is not working.

[@flyingb124]

in asia country like in philippines can we use that fcc mode? thank you and god bless

[@ribellepersempre]

Hi this work for mini or mini se??

[@88alexandru88]

Mine works still today, mini 2 se.. Didn't update the firmware 😊

[@daniell7226]

Mam mini 2 a jakie masz oprogramowanie? I wersję dji fly

[@ninja_nikolaj1]

Does this work with the original mini?

[@henryiiguillem7977]

Pls Help guys.. i have mini 3 pro and have 1km above 90db transmission it means its in FCC mode but when i do range test i only got max 2km on urban places. is it normal?

[@andersmagnusson7620]

hi and many thanks for a wonderfully good channel. do you want to send that video on how to hack to fcc mode on mini3 pro and dji rc control. vh Anders from Sweden

[@klauskossiski5026]

How to use/ install it with Mini 3 Pro + RC Controller ?

[@Teflonfilmare]

No you don't 😂 not supported. But with DJI RC-N1 controller yes. Then you can switch to DJI RC controller since settings are stored in aircraft until powering off.

[@hlz657]

Does it work on Mavic 3 Pro? Thanks!