FCX18 - True 4 Wheel Steer Mixing & More w/ the Stock V5 Remote & Receiver!!! A Deep Dive!

  Рет қаралды 12,645

The Shop - Mini RC

The Shop - Mini RC

Күн бұрын

Пікірлер: 170
@mwayman69
@mwayman69 4 ай бұрын
Thanks for a great tutorial in setting up the LC80. I struggled to do it by just reading the manual, but your video made it a breeze.
@TheShopMiniRC
@TheShopMiniRC 4 ай бұрын
You're welcome! Glad it helped.
@just.me.christina625
@just.me.christina625 7 ай бұрын
I do not have a manual since I got mine second handed.. thank you so much for all this info, extremely helpful with me being somewhat new to the hobby.
@TheShopMiniRC
@TheShopMiniRC 7 ай бұрын
Glad it was helpful! Thanks a ton for watching.
@cardboardcrawlersrc8805
@cardboardcrawlersrc8805 Жыл бұрын
Ken thanks so much for diving deep. I was reading this in the manual, but you made it so much clearer especially the four wheel steer capabilities
@TheShopMiniRC
@TheShopMiniRC Жыл бұрын
Thank you for watchin! Yeah the manual isn’t so clear.
@outdoororiginal4364
@outdoororiginal4364 8 ай бұрын
Thank you Mr Ken … we appreciate you taking time to show us this. Yes, we can see it in the manual but as others have commented, you make it so much easier to understand. Thanks and God bless.
@TheShopMiniRC
@TheShopMiniRC 8 ай бұрын
Glad it was helpful! Thanks a ton for watching!
@jasonh8470
@jasonh8470 8 ай бұрын
For such a basic pistol grip it has an amazing amount of features. I really appreciate the thorough explanation of all the individual features. The FMS LC80 is my next purchase. This model is nearly perfect. Like you said an additional channel so I don’t have to switch out the electronics would be amazing. I think if FMS added some wheel wells to cut down on dirt and mud would put this over the top. I’m already super impressed with FMS. So much so that I’m buying every model they put out. New sub. Keep up with the informative videos.
@TheShopMiniRC
@TheShopMiniRC 8 ай бұрын
We totally agree. Thanks for the watch and comment!!
@0UTCAST247
@0UTCAST247 4 ай бұрын
Great video👍👍I just bought one or the radios in this video and was wondering what it could do . FMS is awesome! My FMS Rigs are my favs hands down!
@TheShopMiniRC
@TheShopMiniRC 4 ай бұрын
Glad I could help
@flipntreasures
@flipntreasures Жыл бұрын
Thanks for another great video. It was so much easier to watch this than trying to figure it out from the manual. I tried setting my endpoints when I received the truck and went back and forth through the manual, I did not accomplish it and fried my steering servo, just put a new one in and definitely will know how to do it properly now. Thanks again for the video!
@TheShopMiniRC
@TheShopMiniRC Жыл бұрын
Glad I could help!
@tehKLN
@tehKLN Жыл бұрын
Thank you Ken! Your breakdowns are so helpful!
@TheShopMiniRC
@TheShopMiniRC Жыл бұрын
Thanks a ton for watching.
@havikhobbies
@havikhobbies Жыл бұрын
I had no idea Ken, I figured it was the same old transmitter! Awesome video mate, thanks for the info 👍
@TheShopMiniRC
@TheShopMiniRC Жыл бұрын
It’s pretty awesome to get this update!! Definitely the best RTR transmitter out there!!!!
@TheShopMiniRC
@TheShopMiniRC Жыл бұрын
www.fmshobby.com/products/fms-mg41-r4a1-transmitter-receiver-set-v5?ref=Bg_nY7gBriVBzw
@QuinnsRC
@QuinnsRC Жыл бұрын
Great tutorial! Add a "turn signal off" mode as well as a channel 2 passthrough!
@TheShopMiniRC
@TheShopMiniRC Жыл бұрын
That would be nice. Turn signal off does exist, just turns off everything.
@parallela.obscura
@parallela.obscura 7 ай бұрын
fcx18 electronics rule! Also, thank you so much for the info. This is my first hobby grade rc. The manual is a doozy to figure out, and fms doesn't provide any specs for many of their components. It's been a wild ride figuring things out lol
@TheShopMiniRC
@TheShopMiniRC 7 ай бұрын
Glad I could help!
@josebingo2755
@josebingo2755 7 ай бұрын
Awesome video!!! Thank you!!!
@TheShopMiniRC
@TheShopMiniRC 6 ай бұрын
You are so welcome!
@rolandjr.pierre1690
@rolandjr.pierre1690 Жыл бұрын
Good job
@TheShopMiniRC
@TheShopMiniRC Жыл бұрын
Thanks a ton!
@devinparker8033
@devinparker8033 Жыл бұрын
It's A bad little truck getting myself one for Xmas and just can't wait. Fcx electronics do rule so when they add a channel 2 it's gonna be insane!
@TheShopMiniRC
@TheShopMiniRC Жыл бұрын
Hell yah. It’s definitely bad ass.
@R3DLiNCOLN-13
@R3DLiNCOLN-13 8 ай бұрын
Thank you for this video it’s greatly appreciated! Question is it normal for the shiftier or “pin” that moves when you switch from high to low to get stuck ? Then when you throttle is pops into the desired gear. I just came across it this weekend where it would stick in neutral or not switch to low gear or when in “neutral” it’s still in gear. It did get banged up bit this weekend maybe that messed with it..
@TheShopMiniRC
@TheShopMiniRC 8 ай бұрын
You likely need to adjust your trim and / or end points. We have a video on that too. Look for “the shop mini rc fcx24 channel 3” and it should pop up.
@TheShopMiniRC
@TheShopMiniRC 8 ай бұрын
It’s possible the shift linkage got slightly bent.
@ginzero
@ginzero 9 ай бұрын
Wow super helpful thanks!
@TheShopMiniRC
@TheShopMiniRC 9 ай бұрын
Glad it was helpful!
@heavyhead9893
@heavyhead9893 4 ай бұрын
Awesome video thanks
@TheShopMiniRC
@TheShopMiniRC 4 ай бұрын
Glad you enjoyed it
@FULLmontyAC
@FULLmontyAC 11 ай бұрын
New to RC. I just got one haven't used it much just testing in the house, after driving it for like 10-15min the rear drive shaft was spinning but not turning tires. Picked up the rig and the shaft fell out from the differential/axel. I took it apart (using your deep dive vid) and realized that the screw from the gear came unwound from the shaft. This was essentially new out of the box. Have you run into this issue or heard anyone with this problem? I screwed it back in reassembled and it did it again, I don't think i tightened it down enough, i didn't want to overtighten such a small screw and into plastic. So I disassembled again and tightened a bit more. It did not come out again immediately like the first I time fixed but I have yet to see if it last beyond a few min. Thanks
@TheShopMiniRC
@TheShopMiniRC 11 ай бұрын
hmm, i have heard one other person mention this. Consider using some super glue or plastic loctite to hold the screw in. You definitely dont want to over tighten.
@stefan-norge
@stefan-norge Жыл бұрын
Great informations 👍🏻👍🏻
@TheShopMiniRC
@TheShopMiniRC Жыл бұрын
We are surprised more people aren’t talking about this?!?!? (Maybe they don’t know)
@paulm1237
@paulm1237 10 ай бұрын
Man, the value on the FCX18 is just insane compared to the other brand offerings at this scale. the ONLY downside (for me) is that the local shops don't stock parts and you basically have to buy online and ship out of china.
@TheShopMiniRC
@TheShopMiniRC 10 ай бұрын
Yeah, it’s amazing for the price. There are a good number of upgrades available from Amazon too.
@DPWian
@DPWian 7 ай бұрын
Honestly if that’s all we have to deal with, I’ll take it. Could be a lot worse.
@rickhenson-ct7bc
@rickhenson-ct7bc Жыл бұрын
FCX electronics rule I have a smasher and I love it
@TheShopMiniRC
@TheShopMiniRC Жыл бұрын
Hell yah. Smashers are awesome
@rolandjr.pierre1690
@rolandjr.pierre1690 Жыл бұрын
Ken you are the best
@TheShopMiniRC
@TheShopMiniRC Жыл бұрын
Awe thanks! I think we are tied cause I think you’re the best for watchin!!!
@Elisplushies360woodierc
@Elisplushies360woodierc 11 ай бұрын
Good to know. Just subbed.
@TheShopMiniRC
@TheShopMiniRC 11 ай бұрын
Thanks for the sub!
@EastTejanoRC
@EastTejanoRC 9 ай бұрын
Wow, why have I waited to get this
@TheShopMiniRC
@TheShopMiniRC 9 ай бұрын
Donno. lol. Its pretty awesome!
@richie4675
@richie4675 2 ай бұрын
Hi, I got the K10. My reverse is not working either way by changing the running mode. Is there a way to program removing or adding reverse?
@TheShopMiniRC
@TheShopMiniRC 2 ай бұрын
Very odd you have no reverse at all? You might be set to fwd/brake/rev. Try flipping the dip switch for running mode.
@AnyAssumptionBanter
@AnyAssumptionBanter Жыл бұрын
Great video. No other way to say that. You deserve way more subscribers. I keep spreading the word. I wonder if getting that tx would work on my power wagon (its the version with the dip switch remote, v3, but the esc is the 2nd version where you have to do some weird trimming in mode 2 unlike the 1st version that came out with the very first batch). psssst... what about the fury wagon? is it the same? fx18 electronics rule
@TheShopMiniRC
@TheShopMiniRC Жыл бұрын
Huge thanks. And yeah, I mention in the video (pop up text) that it also works on the fury wagon. It should work for the older rx as well since it’s in the transmitter. It worked on the dipswitchless version on the Lemur and K5.
@jaymechanic1228
@jaymechanic1228 9 ай бұрын
Fcx electronics rule!
@TheShopMiniRC
@TheShopMiniRC 9 ай бұрын
Hell yah they do!!
@carloshnunez
@carloshnunez 11 ай бұрын
Very good info 🔵🔵🔵🙂🙂🙂👍👍👍🔵🔵🔵
@TheShopMiniRC
@TheShopMiniRC 11 ай бұрын
Many many thanks
@iDoPew
@iDoPew 6 ай бұрын
I'm new to all this! Thanks for the video. Slowly getting into the details :) Question: The channel 2 (gas signal) you'd like to get out of there. Internally, this must arrive at the receiver and somehow be forwarded to the ESC. So if you really wanted you could open up the box find that signal line and route it out together with GND and VCC and you'd have what you're looking for, right?
@iDoPew
@iDoPew 6 ай бұрын
FCX18 Electronics Rule! ofc!
@TheShopMiniRC
@TheShopMiniRC 6 ай бұрын
You could try. lol. If you figure that out, let me know.
@iDoPew
@iDoPew 6 ай бұрын
Dont have one of those (yet). Pretty sure it would be possible. I'll try if I ever get one of those.
@danielvieten9057
@danielvieten9057 8 ай бұрын
Well done, thanx a lot.
@TheShopMiniRC
@TheShopMiniRC 8 ай бұрын
Thank you too! Hope to see you come back and watch some more videos!
@FULLmontyAC
@FULLmontyAC 11 ай бұрын
FCX18 Electronics Rule!
@TheShopMiniRC
@TheShopMiniRC 11 ай бұрын
Hell yah they do! We just got another transmitter to do 4ws on our Lemur!
@OGKDOG104
@OGKDOG104 Жыл бұрын
Im so stoked that you made this video an the 4ws. I was thinking i was gonna have to put it on my Radiolink for true 4ws. I wasnt quite sure what you meant by "rear mirror" option 5?
@TheShopMiniRC
@TheShopMiniRC Жыл бұрын
So for some reason they made the last mode just reverse the steering on the rear only. Seems odd but it’s an option.
@Hannsom7
@Hannsom7 Жыл бұрын
maybe if you built a fork lift ahahah@@TheShopMiniRC
@TheShopMiniRC
@TheShopMiniRC Жыл бұрын
@@Hannsom7 true. Maybe. Lol
@ruledf1175
@ruledf1175 Ай бұрын
Hi thanks for your video it was really helpful compared to the manual. I have a problem with my throttle, it not responding anymore. Maybe you have some ideas? Steering works fine. Even in stick calibration mode there is no response from the throttle? My fcx 18 is 2 weeks old 😊. Btw brakelights work fine.
@TheShopMiniRC
@TheShopMiniRC Ай бұрын
Make sure the throttle dual rate is turned up all the way and also be sure your battery is fully charged. A near dead batt will give steering and lights but no throttle.
@ruledf1175
@ruledf1175 Ай бұрын
@@TheShopMiniRC even with fully charged battery I have the same issue. One thing I noticed on the battery charger is that the red LED is sometimes solid and sometimes a mix of solid and flashing. Could it be that my battery or charger is broken?
@TheShopMiniRC
@TheShopMiniRC Ай бұрын
@@ruledf1175 it’s possible. You need to be sure the battery in the truck is actually getting fully charged. The usb chargers are garbage.
@ruledf1175
@ruledf1175 Ай бұрын
@@TheShopMiniRC is there an other option besides the charger which comes with the car?
@TheShopMiniRC
@TheShopMiniRC Ай бұрын
@@ruledf1175 any hobby grade charger can charge these batteries. Worst case you might need a plug adapter.
@JD-tl7ld
@JD-tl7ld Жыл бұрын
I wish the 10th scale trucks would have come with this transmitter. I had to get a 1080 to get some of the features I wanted.
@TheShopMiniRC
@TheShopMiniRC Жыл бұрын
Right?!? Even the 1080 won’t give you 4ws.
@JD-tl7ld
@JD-tl7ld Жыл бұрын
@@TheShopMiniRC No, but that wasn't something that I was interested in for my Atlas. Useful on a small scale crawler though. My Atlas is strictly a trail truck.
@renju458
@renju458 10 ай бұрын
Hi Mate what number hex driver need to open the body from chassis ?
@TheShopMiniRC
@TheShopMiniRC 10 ай бұрын
Should be a 1.5 I believe. If not, 1.3.
@mikesousa812
@mikesousa812 7 ай бұрын
Hoping you can help me with a problem I’m having with this RC. My G.Led light is slowly blinking green and the RC itself will turn off completely while using it for a few minutes. The battery is not dead or anything, but I tried rebinding it and not getting any different results
@TheShopMiniRC
@TheShopMiniRC 7 ай бұрын
Be sure your transmitter batteries are fully charged or new.
@allisuebaheza2838
@allisuebaheza2838 3 ай бұрын
Will the v2 transmitter for fms max smasher connect to any other recievers
@TheShopMiniRC
@TheShopMiniRC 3 ай бұрын
I am not 100% sure as we dont have a v2 transmitter. However, I am pretty sure it will. We have bounce v1 and v3 rx/tx together without issue. Let us know if you find our for sure.
@TrokaRC
@TrokaRC Жыл бұрын
Fcx electronics rule!
@TheShopMiniRC
@TheShopMiniRC Жыл бұрын
Hell yeah.
@benbrown565
@benbrown565 9 ай бұрын
how are yall extending the servo wires? is there a plug and play extension or ?
@TheShopMiniRC
@TheShopMiniRC 9 ай бұрын
There are. You have to just look on Amazon. You can also make one. Or you can resolder the wires or make a new one or use an aftermarket servo. Many options. I have a few videos.
@benbrown565
@benbrown565 9 ай бұрын
@@TheShopMiniRC robbed the servo off my fms 1/18 toyota hilux and also robbed the front axle and wallah 4 wheel steering!
@sparkycooper6621
@sparkycooper6621 11 ай бұрын
So with the furitek setup u could do rear steer but no lights correct?
@TheShopMiniRC
@TheShopMiniRC 11 ай бұрын
Yeah. The furitek rx doesn’t have a light controller.
@GBDiaz13
@GBDiaz13 9 ай бұрын
Getting frustrated setting my steering trim. I set it to 0 (centered), then I put my new horn on and tried to set it as centered as possible. When tightening everything up, the horn is ever so slightly off. And to have the wheels perfectly straight, I need to trim a little. Should everything be at 0 and the horn perfectly centered when the wheels are straight, or is it ok for them to be slightly off.
@TheShopMiniRC
@TheShopMiniRC 9 ай бұрын
That is almost always the case. It’s usually because of the splines on the servo horn. I’ve pretty much never had one actually be centered when first installed. They almost always need a bit of trim.
@GBDiaz13
@GBDiaz13 9 ай бұрын
@@TheShopMiniRC Thank you! That makes me feel better, it was driving me wild last night lol. Haven't even had this thing for 24hrs and have already started doing some mods to it. It is such a great little rig. SCX24 was my first truck, this thing blows it out of the water (out of the box at least). By chance, are your head lights a bit different in tint/brightness? I feel like either headlight is quite a bit different from each other.
@TheShopMiniRC
@TheShopMiniRC 9 ай бұрын
@@GBDiaz13 yeah.. i feel like they kinda are different.. funny enough, a lot of those older trucks had 1 light brighter than the other if I remember right.
@whiskers762
@whiskers762 5 ай бұрын
Does this also work for the R4A reciever or do you have to have the R4A3
@TheShopMiniRC
@TheShopMiniRC 5 ай бұрын
I bound it to my 6x6 Apachee and I believe that is the R4A and it worked just fine!
@whiskers762
@whiskers762 5 ай бұрын
Cool thanks good to know
@albertogonzalezrodriguez7635
@albertogonzalezrodriguez7635 9 ай бұрын
Buen video amigo!! Me comprado hace una semana un fcx24 power wagon,pero mi emisora no es como se muestra en el video. Tengo problemas porque no puedo ajustar o no se ajustar el drag brake ni puedo cambiar rápido marcha hacia adelante a marcha atrás sin poder hacerlo rápido porque tengo que darle dos veces. Es un fastidio la nueva emisora no la veo tan completa como las unidades de hace un año. Saludos amigo desde España
@TheShopMiniRC
@TheShopMiniRC 9 ай бұрын
Yeah, there were some power wagons with different electronics. :(
@iammad4513
@iammad4513 Ай бұрын
Is it possible to do the same with the newer transmitter as it has no channel 4, please make a video if it is possible
@TheShopMiniRC
@TheShopMiniRC Ай бұрын
Sorry, no. You need the v5/6 remote.
@iammad4513
@iammad4513 Ай бұрын
@@TheShopMiniRC thank you
@Mithun9119
@Mithun9119 3 ай бұрын
Hi! My LC80's speed has reduced drastically. Can you tell me why it could be?
@TheShopMiniRC
@TheShopMiniRC 3 ай бұрын
either your motor is dying, your battery is dying or your esc is dying. Also check to make sure you arent binding up in your drive line anywhere. You should be able to turn your wheels by hand fairly easily (while the truck is off)
@GonkSmasher
@GonkSmasher 5 ай бұрын
Hi, I just got this FMS Landcruiser and when i put it down i immediately noticed the wheels are not centered and always steering a bit to the right, I already tried the calibration but it still the same :/
@TheShopMiniRC
@TheShopMiniRC 5 ай бұрын
The trim dial will help you center your wheels. If it won’t turn rough to get them centered, you can remove the servo horn, center the trim on the remote, and then reinstall the servo horn with the wheels straight. Then use the trim to do the fine adjustments.
@maxwell5428
@maxwell5428 Жыл бұрын
So the 4ws is only on the new dip switch remotes? Would I be able to do this with my fury wagon?
@TheShopMiniRC
@TheShopMiniRC Жыл бұрын
Unfortunately, only the newest remotes. They must say V5 on the bottom. You can buy the remote and rx (which you wouldn’t use) for $30.
@maxwell5428
@maxwell5428 Жыл бұрын
@@TheShopMiniRC good to know. I might just pick up an lc80
@TheShopMiniRC
@TheShopMiniRC Жыл бұрын
www.fmshobby.com/products/fms-mg41-r4a1-transmitter-receiver-set-v5?ref=Bg_nY7gBriVBzw
@SimranjitChanna88813
@SimranjitChanna88813 7 ай бұрын
Hey, I just purchased mine brand new and I received it but my remote isn’t connecting to the car, I tried your 2 methods but still isn’t working. What could be the issue ?
@TheShopMiniRC
@TheShopMiniRC 7 ай бұрын
very odd.. be sure you have brand new batteries in the transmitter and that the truck battery is fully charged. If the simple "Hold bind, turn on remote, let go of bind. (light should be flashing) Turn on the truck (should bind), if it doesnt power cycle the remote" doesnt work.. reach out to FMS or where ever you bought it.
@SimranjitChanna88813
@SimranjitChanna88813 7 ай бұрын
Ok I’ll try putting new batteries, when charging I don’t know if it’s fully charged cause I don’t see a green light showing.
@SimranjitChanna88813
@SimranjitChanna88813 7 ай бұрын
@@TheShopMiniRCthanks it worked.
@TheShopMiniRC
@TheShopMiniRC 7 ай бұрын
@@SimranjitChanna88813 niceeee!!! Glad that fixed it!
@xavierdoc
@xavierdoc 3 ай бұрын
FCX electronics rule!
@geonardlc3813
@geonardlc3813 11 ай бұрын
fcx18 rule!
@TheShopMiniRC
@TheShopMiniRC 11 ай бұрын
Thanks for watching the whole video!!! We think they rule too!!!
@repleh82
@repleh82 7 ай бұрын
FCX18 Electronics Rule.
@TheShopMiniRC
@TheShopMiniRC 7 ай бұрын
Hell yah! Thanks for watching.
@A13XzN6
@A13XzN6 8 ай бұрын
Hii!! Anyone know if they implemented something new with the V6? i got the v6 esc and it's looks the same like the one in the video..
@TheShopMiniRC
@TheShopMiniRC 8 ай бұрын
What truck did you buy?
@A13XzN6
@A13XzN6 8 ай бұрын
@@TheShopMiniRC It was a gift from my brother, it is the FMS FCX18
@A13XzN6
@A13XzN6 8 ай бұрын
I can provide you the link if u want to check it out.
@TheShopMiniRC
@TheShopMiniRC 8 ай бұрын
@@A13XzN6 if it’s the new lc80, that’s what I show in the video. They may have updated the transmitter though.
@TheShopMiniRC
@TheShopMiniRC 8 ай бұрын
We have a new release fcx18 so I can check that remote to see if it’s a “v6”
@Enter_a_name15
@Enter_a_name15 3 ай бұрын
What servo do you recommend?
@TheShopMiniRC
@TheShopMiniRC 3 ай бұрын
The new Torq TCM-1022!
@Enter_a_name15
@Enter_a_name15 3 ай бұрын
@@TheShopMiniRCIs there a cheaper on that would still last? I need to buy one for my FCX18 k10 and the other one died.
@TheShopMiniRC
@TheShopMiniRC 3 ай бұрын
@@Enter_a_name15 if you are looking for a higher torque servo, this one will be the best for the price. You can also look on Amazon for the OGRC high torque to just try to buy a stock replacement
@Mithun9119
@Mithun9119 4 ай бұрын
My G LED keeps on flashing. Can you tell me why please?
@TheShopMiniRC
@TheShopMiniRC 4 ай бұрын
Check your remote batteries. ;)
@Mithun9119
@Mithun9119 4 ай бұрын
@TheShopMiniRC Thanks. Battery was low.
@NatesRCclips
@NatesRCclips Жыл бұрын
Yes the electronics rule😂
@TheShopMiniRC
@TheShopMiniRC Жыл бұрын
hell yah they do!
@WilliamHerd-d8z
@WilliamHerd-d8z 9 ай бұрын
where do you get a winch
@TheShopMiniRC
@TheShopMiniRC 9 ай бұрын
there are a few options on ali express. Also. Rogue Gorilla Workshop on etsy has a good one www.etsy.com/listing/1551666500/working-winch-for-124-scx24-gladiator?click_key=42c610cc061edcdb81ad6a0252263139599d7e3e%3A1551666500&click_sum=0bc8bc23&ref=shop_home_feat_1&sts=1
@Basiltpaul7
@Basiltpaul7 Жыл бұрын
Hii.. Broo... There is any winch that's suitable for 1/18. Plzz rply.....
@TheShopMiniRC
@TheShopMiniRC Жыл бұрын
there are MANY winch options most just use a 360 Degree servo. Check out some of the stuff 3flow9RC makes as well as NSDRC's micro winch servo. There are also Scale Winches that are fully functional but more for scale looks.
@jeremyofthejungle
@jeremyofthejungle Жыл бұрын
Can I purchase this controller and bind it to my smasher?
@TheShopMiniRC
@TheShopMiniRC Жыл бұрын
Yeah. It comes with the esc though and is about $30.
@samfaitchmir
@samfaitchmir Жыл бұрын
@@TheShopMiniRCHi. I’m a french speaking follower so maybe I miss if you give the precise reference (you said it’s a v5 or kind like that). It’s a shame that it didn’t come as a standard combo with the Smasher v2 for instance. Maybe it will in futur ? Keep going your channel is great !
@TheShopMiniRC
@TheShopMiniRC Жыл бұрын
@@samfaitchmir yes, it’s specifically the remote that comes with the new fcx18 LC80. It has a V5 sticker on the bottom.
@Kakes676
@Kakes676 11 ай бұрын
New fx118 have trouble make the third an fourth channel to just turn the lights on an off. No luck an the manual is no help
@TheShopMiniRC
@TheShopMiniRC 11 ай бұрын
Hmm should be channel 4. Check my main fcx18 review video If you are actually talking about the fx118 from Furitek, there is no light controller on that rx. The lights are always on.
@Kakes676
@Kakes676 11 ай бұрын
Cool. I assumed that they programmed the esc to only have two functioning channels. Thank you. Great truck other then that.
@clairetreasure8153
@clairetreasure8153 7 ай бұрын
Hi thanks for the video can you please make one if you can do it make it have a 1/18 winch because I haven't seen enyone do it and I really want to make mine have a mini winch ❤ thanks 👍
@TheShopMiniRC
@TheShopMiniRC 7 ай бұрын
at some point, we will definitely do a 1/18-1/24 winch video
@Dad-Dom
@Dad-Dom 8 ай бұрын
Can you change the rims
@TheShopMiniRC
@TheShopMiniRC 8 ай бұрын
100%! There are thousands or wheel options for these
@mr_taco_offroad1526
@mr_taco_offroad1526 5 ай бұрын
Hey, I want to do rear steer on my trx4m, what do I do , I clicked becaue I was like ok but I realize they are diff cars, stilled watched, please get.back to me. Thanks
@TheShopMiniRC
@TheShopMiniRC 5 ай бұрын
For the TRX4M you need to get a different remote, receiver and esc. :( traxxas stock electronics aren’t the best. (Or get a special module like the Bastens, I show in a video below) There are a ton of good options out there. You just need a channel 3 with 3 position switch (but that gives full left, full right and center) or even better mixing or a dial I have another video talking about 4ws kzbin.info/www/bejne/Z2G8lph6jtSYacUsi=HnLlqJgNMYHwAXzF
@mr_taco_offroad1526
@mr_taco_offroad1526 5 ай бұрын
@@TheShopMiniRC I was looking at is INJORA MB100 ESC And 6CH Transmitter Receiver For 1/18 1/24 RC Crawlers, will it work where I can click a button to change it form crab to rear to front or to all?
@TheShopMiniRC
@TheShopMiniRC 5 ай бұрын
I dont know about the 6 ch transmitter. I am pretty sure it doesnt have "rear steer mixing" where the front and rear both turn from the steering wheel... but it does have a channel 5 where you can turn the rear there or use the channel 3 3 position again.
@danon-theautisticmaker8112
@danon-theautisticmaker8112 8 ай бұрын
It's too bad that they couldn't have used the 2 reverse (reverse steering, & reverse throttle) switches in rear steer mode to more easily select ur rear steer mode.
@TheShopMiniRC
@TheShopMiniRC 8 ай бұрын
Could have been nice.
@GhettoCountry1976
@GhettoCountry1976 6 ай бұрын
Fck18 electronic rule
@TheShopMiniRC
@TheShopMiniRC 6 ай бұрын
Ty for watching.
@Jay-ws7tv
@Jay-ws7tv 9 ай бұрын
Better than trx4m
@TheShopMiniRC
@TheShopMiniRC 9 ай бұрын
In a lot of ways. Yes.
@josephlafluer7266
@josephlafluer7266 2 ай бұрын
Made a video with the rear steer on the Hummer.. Thank me later or I will do it before you and add the AI rap music over the video to match!
@TheShopMiniRC
@TheShopMiniRC 2 ай бұрын
eh? I mentioned already that I would do a video on rear steer.
@jasoncaisley5071
@jasoncaisley5071 6 ай бұрын
shit hot ken another really helpful vid thanks
@TheShopMiniRC
@TheShopMiniRC 6 ай бұрын
Glad it helped!!!
FCX18 - LC80 Deep Dive & Review. Verdict: Amazing!
1:06:09
The Shop - Mini RC
Рет қаралды 13 М.
Try Not To Laugh 😅 the Best of BoxtoxTv 👌
00:18
boxtoxtv
Рет қаралды 6 МЛН
Это было очень близко...
00:10
Аришнев
Рет қаралды 6 МЛН
Всё пошло не по плану 😮
00:36
Miracle
Рет қаралды 4,9 МЛН
小蚂蚁会选到什么呢!#火影忍者 #佐助 #家庭
00:47
火影忍者一家
Рет қаралды 126 МЛН
1.0 Tires on 1.3 Wheels. How-To!
13:47
The Shop - Mini RC
Рет қаралды 297
FMS Fcx18 LC80  Stone quarry XVII  Rock crawling
11:22
ORRC 16
Рет қаралды 5 М.
FMS FCX24 CH3 Remote Hack / how to get 3 positions back
6:37
Hof's Place
Рет қаралды 6 М.
Why Do LED Bulbs Fail? An Autopsy!
16:57
The Doubtful Technician
Рет қаралды 110 М.
FMS FCX18 K10 on Portal Axles! We deep dive & review this classis truck.
1:01:07
You're not going to watch this video - FMS FCX18 Chevy K10
11:34
Scale Builder's Guild
Рет қаралды 15 М.
Try Not To Laugh 😅 the Best of BoxtoxTv 👌
00:18
boxtoxtv
Рет қаралды 6 МЛН