thank you for taking the time to make this for us brother - i loved each and every detail and the effort you took for each shot and scene and the information and advice and tips. you bloody legend! i want 2 now!! one for me and hopefully 1 to get my wife or daughter into it :P

I mounted all 3 of mine on the back wall where the old one was. I cut the top out so I could access the power switch very easily then made extensions for the battery. The new 4ws version has their receiver mounted on the bottom of the battery tray so I just followed that with my others and made sure everything cleared the drive shaft. Then I zip tied my wires to the cage under the panels nice and clean and everything works great

I'm not sure if you were just listing odd sizes or what but you skipped 1.55 tires js

I’m yet to see a fpv camera without the interference glitch.

Thank you for these installation instructions. I have installed the RCAWD extended links on a FCX24 Lemur. I also purchased a regular set of driveshafts from RCAWD to replace the stock ones on another FCX24 car. Both the 7cm driveshaft from the set of extended links and the normal set of driveshafts from RCAWD have disappointed me. They are universal driveshafts with a round opening for the gearbox and differential shafts instead of a D-opening, the joints sometimes jam and centering is difficult even with 2 of these tiny grub screws. The result is extremely annoying vibrations. In my opinion, the drive shafts from RCAWD are not really of good quality and not explicitly made for FMS FCX24 cars, which is clearly noticeable. Maybe a tip here, slowly screw the grub screw down to the flat side of the gearbox and differential shafts and move the driveshaft slightly back and forth. This way you will notice when the grub screw has hit the hole in the shaft. Tighten well and don't forget to use Loctite. This will hold the driveshaft securely but may still cause vibrations.

Looks like alot of fun!

So can you set the steering trim also on the app?

Ha! I didn't even know this was a thing. Just got the truck for my kid.

Is the differential really locked?

I have one how long does it have to charge for

FMS is killing it! I just found this channel and appreciate the tear down and parts comparisons so much

Thanks for making this video buddy. It saved me a big headache. Took mine apart to take off the 180 motor and put on a Purple Viper and i knocked it off the tray and the gears popped out of place. You definitely saved me a ton of time.

After running two packs through mine I'm very happy with it. Now I want a Scout 800 or maybe even a long wheelbase Travellall version

Did you know a 1.3 ring fits over some 1.0 inner rings. 🎉

Where did u get the wheelie bar bro

Dual rate

That slipper sounds super loose. Something is definitely off on the gears. It sounds terrible

I’m not sure if you can count how many times someone has watched your video, this one in particular. I have to give you a big thank you!! sir 🙏🏼 I’ve updated my FCX10 K5 with the winch you installed and saved me a substantial amount of $$$. I was going to spend almost $200 on a set of bumpers and $35-$45 winch that mounts to those bumpers. When I seen this video I spent less then $35 got everything I was looking for installed and functioning. 💯👊🏼

So cut the wires to the switch and solder the wires together lol

The indestructable truck.

Double Doohicky!!!

Great and to the point video. Thank you very much.🙂

This is not an isolated event either. Several other KZbinrs have had the same thing happen unfortunately

So disappointed I bought this.. recieved it a few days ago...should have waited

Truck and transmitter wont bind, just keeps fucking beeping and beeping over and over again. Beyknd annoying. Idk what to do

Anyone know what model that is @ 1:34:34 ?

2.5mm or 3.0mm washers?

They are certainly pushing their luck with that livery......

Thank you for this video, I am fairly new to the hobby and the depth you went into here was fascinating, watched the whole thing start to finish in my rural village in Yorkshire :) Could I get your thoughts on this car vs. the Evo Pro (brushless versions)? I prefer the appearance of this car, but wonder if the Evo Pro is more capable (given the low frame and portals).

Can you send link for an aluminum axle housing for MT18?

Or another way is to buy some of the servo connectors and then you just have to crimp the servo wires into the connectors. A little bit more expensive but no soldering and then no heat shrink either!! Clean wires

Gens the Ace ♠️

Help, why does the module fms fcx24m spin to the left side when moving forward and constantly turn to the right, what could be the reason?

The Ascent 18 made me take another look at Redcat. This time more seriously. Bro, they got some cool shit! And for pretty affordable prices! If the rest of their products are as high in quality as my Ascent 18, I'm gonna get something else. Got my eye on the Gen8 Scout.

Oh wow, only one minute well I guess that’s better than nothing. Appreciate you sharing. I’ll watch for the next one.👀👀 well until next time peace and chicken grease😁👍👍👋👋😎

Yeah, look what I found, awesome guys. I’m here watching 5:13 PM Friday, December 20 appreciate the video.👍👍

Hello, any chance you could supply me with the link to in the beginning of your video before the conversion you had the rims and tires on there that were slicks.

Bro, I love how you give the extra little tips like cutting the tabs off and flipping the screws around

Overdriven

I so appreciate you videos like this make this hobby actually a little bit easier instead of having to ask the smart asses on social media

Has anyone managed to get an F1 shell onto a k989 chassis?

That was a complete movie Totally awesome!