#113

This Shure PGX transmitter did not power up. The problem was traced to a faulty power switch.

[@HelmutTschemernjak]

Thank you for showing this repair including the mechanical and soldering details and your advice. Every single video helps the audience (and me) to learn something. Danke, Helmut

[@oldblokeh]

A handy tip for using desoldering braid is to hold a piece with hot tweezers. The tweezers supply the heat, allow more precision and stop you burning your fingers on the braid.

[@carybrewer9142]

Great video. Saved $200 with a 40 cent part. Much appreciated.

[@chencik123]

There is another way to fix it. You can disassembly switch without desoldering. There is only three parts inside. On the bottom of switch you have to scratch copper part to get it shiny and assemble back.

[@MrDubje]

Classic failure of the part that interfaces with the human that uses it! Thanks for sharing!

[@FUNKYFOOT5150]

Do you have a part number for the switch by chance? Or a link to it? Great video!

[@LotchMuziq]

Hi I have one a AKG PERCEPTION 820 mic not functioning... its powered by a remote control unit .. do u do repairs on this unit

[@connguyen7319]

can you repair shure hand held transmitter U2 with transmiter short under 5'

[@learnelectronics1806]

Nice video sir

[@mawka13]

Hello I have the same issue. Do you do repairs. I took all of it apart and just need the part put it.

[@ramilyariyev8135]

Bunun ses qirilmasi neden olur? Ve bunun təmiri varmi?

[@victorhugod387]

Hello I have exactly the same problem where I can find this kind of switch??

[@feedback-loop]

DigiKey or Mouser

[@spaghetti_man3807]

I need to replace the switch on my microphone, but I don’t own any soldering tools, is there any alternatives other than paying somebody to repair it?

[@djjoeybeatz]

I did the replacement in under 10 min. I have extra parts if you want me to send you the switch. Or you can remove the board and ship it to me

[@ericprince2865]

@@djjoeybeatzdoes that offer still stand about the repair? Could I send you my mic I have the same issue?

[@rajujeslo9291]

Useful

[@andymouse]

Cheers.

[@cherrielam7984]

Thank you for your teaching, may i have the switch part model number or this product part number from "Mouser Company"？？ really i need to buy one, as my shure pgx2 transmitter cant turn on/off😥😥thank you🙏🙏🙏

[@feedback-loop]

Something like this: www.digikey.com/en/products/detail/apem-inc/MJTP1106STR/2344159

[@cherrielam7984]

@@feedback-loop ok let me study it, thank you very much😊😊😊🙏🙏🙏

[@AbdaalhMohamed-kj8ez]

عندى ميك عوز شفره وكبسوله

[@Aelab58]

Акцент вас сильно выдает!!!))

[@sinesio30jesus49]

Alguém tem a placa de miclofone pra vender pra mim ?

[@victorhugod387]

Eu queria é saber onde é que posso encontrar esse swicher??

[@EligioFlores]

Sorry, How much should I charge for that repair?

[@sergeymolkov3201]

Я так понимаю, автор канала русский😂 Наш акцент очень чувствуется. Опять же, обручальное кольцо на правом пальце.

[@alieslami2321]

POINT.GUARD of X IZ..u can hear that in it AL.

[@alieslami2321]

Let's see ..

[@ireneroberts7659]

My microphone has green light on, but red light comes on now & then, that makes the sound comes on & off. What is causing this & were is the problem please? This microphone comes with a bluetooth speaker. Your help will be highly appreciated 😢

[@TKomoski]

I would use a side cutter and cut the leads. Then remove the rest of the component from the board, I'm lazy that way

[@feedback-loop]

I think this is more dangerous. Sometimes too much cutting force can be transferred trough the lead to the pad. At least I am afraid it could.

[@TKomoski]

@@feedback-loop Your right, but if I can't normally I brute force it out/off

[@HelmutTschemernjak]

Another option is to protect the area around the switch with Kapton-Tape and use a hot-gun to de-solder it, however this method means to the switch is likely to melt.

[@TKomoski]

@@HelmutTschemernjak That's a Good and Other way if you have the equipment to do that

[@esmailshaik1236]

Aapka no deejiye

[@nicholaseastman6915]

Who's else in the shop? Why do you say "we" so often? Or is this the expression of the self-esteem in its highest?

[@feedback-loop]

Figure of speech. www.thoughtco.com/inclusive-we-grammar-1691053

[@pateldjvaranasi9214]

Sar ji mera sm58 slx4 lock ho gaya hai anlock nahi ho raha hai please help sar

[@mahendrajoshi3020]

Namskar Sir ye Hindi Mai bataye

[@alieslami2321]

ÌLA

[@poladaliyev-bx5ko]

отходиш далше волна исчезает