FeelTech Signal Generator FY3200S, FY3224S

Functional Test of the Dual Channel DDS Signal Generator

[@SpeccyMan]

The 24MHz frequency is only for the sine wave as mentioned in the specifications for this device! The maximum frequency for all other waveforms is considerably lower.

[@Dronebotworkshop]

Thanks for a very informative review. I was looking at this on eBay today and am considering purchasing it.

[@Agni_Puthra]

Watching this in 2022 when I was going to purchase it and needed some reference to know what I'm getting into. Then saw Dronebot Workshop's 5 year old reply. 😀 That's two amazing finds at the same time... Subscriber of both of you guys.. and thank you both.

[@pleaseyourselfsir]

This is a great video ! Thank you for sharing it with us , i have the FU3200s model too and it was VERY HELPFUL ! 👍🏻🍻😊🏆

[@frac]

Well presented video. Subscribed in hopes of seeing you post some more.

[@nicolastrelles5584]

mine is from Daniu but works exactly the same, thanks a lot!

[@warplanner8852]

I'm sorry but you'll have to stop yelling when you do your videos! (I am just kidding, of course. Your review is very good and appreciated!)

[@nicolabarlaba3298]

Hi! nice review! have you ever try to supply the primary of a transformer with this?

[@11warlock11]

It just arrived yesterday thanks for the video Sir, I had a little difficulty with the language.

[@mse6424]

+11warlock11 u'r welcome

[@drm1drm1]

Very useful; thanks.

[@BTom16]

+Dan Melamed Agreed.

[@schiaucugabriel6202]

Can you tell me please the behavior of the signal generator when the offset is at the extremes? On my generator, when I try to go with the offset at maximum positive, the signal become unstable and the frequency bounces around the designed value. Thank you for your answer!

[@paulc317]

When in frequency sweep mode, does it have a voltage output which is relative to the frequency?

[@mse6424]

+paulc317 normally the output voltage is constant ofer the sweep range. The voltage will drop on higher frequencies. if you sweep from 0 to 20 MHz of course there will be a drop at the end

[@paulcohen1555]

+m si I wa not writing about the main freq. output , but an additional output with voltave relative to the frequency.

[@mse6424]

+Paul Cohen Sorry Paul, i misunderstood, there is no voltage output relative to frequency, as far as i know br michael

[@maheame1166]

Hi. On line purchase has its own drawback that you can not narrate a salesman what exactly you seen in the show case with what accessories etc. (Also most chines products unsold old windows 98 compactible). No contact will be made with you regarding configurations, For Instance, I purchased Alarm clock camera online. The small cd forwarded with the parcel is of old age, i.e., even windows xp could not run it correctly. The Time and date on the video recording failed after all efforts. Firstly the product was labeled price as Rs.3900 with discount about 1500. Yes, the product received without micro memory card. The savings were utilized for purchase of 32 GB card for Rs1800.

[@JanMartinB]

Hey, so what is you opinion,worth or don't buy it.I am thinking of buying function generator under 200USD.

[@mse6424]

+Jan Martin Bolstad for me it's absolutely worth the money...

[@morgangiven4877]

would you recommend this for an electrical engineering student looking to experiment with counter chips?

[@mse6424]

morgan given students normally don't have much money and do not need precise instruments. so in my opinion this generator is a perfect choice

[@joealki1248]

Some spello's ... pretty kool ... trying to send commands in QB45, VB ac. C++ ...Xie xie beaucoup

[@killaskateboards9578]

I am running this device to powered orgonite devices for atmosphere purification purposes. It works well, but i would like to make small simple circuits that plug into the wall that produce a square wave that oscillates at 7.83hz the schumann resonance. Any info or links you can turn me on to for building square wave circuits would be much appreciated. Thank you

[@mse6424]

+killa skateboards hi, you can ask google for a "7.83 hz oscillator" and you will get a lot of pics and info how to build br

[@gracebayan6914]

very interesting how is that workingout? using traditional orgonite I.e cloudbusters? wat frequency are you using? have you used it therapeutically?

[@killaskateboards9578]

I have been using a lot of frequencies. therapeutically the Schumann at 7.83hz has been found to de-stress the body at the cellular level. I have been making tensor rings and tensor harmonizers to use as amplifiers they work well together. Instead of running a frequency into a coil around the crystal you can wrap it around a tensor ring and place the crystal in thr center poured in orgonite and the readings can get into the billions way off the bovis scale. info on tensor technology. www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&uact=8&ved=0ahUKEwjtw8eWy7vUAhVGET4KHSmmD24QFggoMAA&url=http%3A%2F%2Fspiritofmaat.com%2Ffeb08%2Fslim_spurling_user_guide.doc&usg=AFQjCNFhDsr0_z6IFZKG1HG6gXARnbVKqQ&sig2=90FhJr_xJdzO5kmnWRwwHA

[@Adrian375a]

i need to upload an arbitrary signal form on the generator , how may i do that ?

[@pedromerchan8199]

Hey, I am struggling to enter an arbitrary waveform from the "text" box. I type a string of 2048 integers between 0 and 4095 separated by spaces and when I click on "view" it shows the waveform correctly, but when click on "send" it returns an error. Did you test that function??

[@mse6424]

hi pedro, sorry i did not test this. i only made a quick test painting a waveform with the mouse.

[@avadharayati4615]

can it make sweep on both channels independently ?

[@mse6424]

Hmmm, i did not test this, but i guess it will not

[@avadharayati4615]

@@mse6424 Thanks!

[@astroboyyo612]

Hola amigo podrá tener el manual de uso gracias

[@vonniecorrigan2040]

Every the ad says it is!

[@Adrian375a]

hi , thank you very much for a very informative video , i have a fy220sp but lost the cd as the software was not working with my win 7 64bits anyway , do you have a software for it that is compatible with my win ? Thank you anyway !

[@mse6424]

Hi Adrian, i have the original software for the generator running under Windows XP (it's my workshop pc), so i never tested if it runs under Win7. With the software you can create arbitrary waveforms on the FY-3200. As I don't know you generator model, i can not guarantee that the software will work, nor if its able to load and output arbitrary waveforms. best regards Michael

[@Adrian375a]

i have an FY2200SP and wish to try to upload an arbitrary waveform thru win 7 64bits, could you please help me out with the software that you have so i can try ? the software on the feeltech website is for driver software but nothing i can use for uploading the file via usb cable to the generator, please advise , Adrian

[@MrMJY]

it product power supply have high frequency noise. so changed power supply.

[@mse6424]

+min jae Yoo hmmm... i can see some peaks oscilloscoping the npower supply. but this "noise" depends on the frequency which is set on the generator and does not affect the signal output... in my case

[@MrMJY]

mmm maby i recived faulty product.. that noise was really big and independent without frequency set.