mse

Пікірлер

@Leitner86 Ай бұрын

Does anyone know how high the measuring current is for the low resistance measurement?

@williambutlersr.4587 2 ай бұрын

Wish you had shown what video capture software you used to show the images on your computer.

@mse6424 Ай бұрын

Windows 10 has a camera app

@Musicconfigworld 3 ай бұрын

Thanks

@gerardohocino1338 3 ай бұрын

what is part number of this ic

@GuillermoLeib 5 ай бұрын

Good walkthrough. Thank you!

@hossamel-din5047 5 ай бұрын

Please what is the number of regulator 8 pin

@mirola73 8 ай бұрын

Well done, thank you. Especially the part where you showed hot/cold spots of your house was useful as that's what I'm intending to use it for.

@uweweltin5276 8 ай бұрын

what about low frequency waveform quality; e.g. rectangle at 1 hz 19Vpp

@mse6424 8 ай бұрын

at 0.1Hz (19V) the rectangle has a rise time of 810us and looks perfect

@uweweltin5276 8 ай бұрын

@@mse6424 thank you, that is exactly what I need. I will order one SDG2042 today. Like you I searched a lot… waiting for your bode tutorial

@mse6424 8 ай бұрын

@@uweweltin5276 Batronix in Preetz, Germany was very helpful, they sent both generators for test and I decided to keep the 2042

@JohnUsp 9 ай бұрын

Interesting comparison, seems the SDG1032X has a better signal quality than SDG2042X.

@emmanuelagyemang8519 10 ай бұрын

Thank you sir

@copitolapara5134 10 ай бұрын

what regulator does it use

@bajatoma 11 ай бұрын

Thanks for putting this video together Overall - happy with the purchase?

@mse6424 11 ай бұрын

Thanks for your comment. And yes overall happy....

@Vinny2142 Жыл бұрын

Hey there, hope all is well and appreciate your detailed reviews. Have a question for you when you have time.. I'm a retired electrical engineer and would like to buy a more modern 4 channel oscilloscope as more of a hobby item use than profession. In my later years the job I had did not require much use of one, so I'm a bit rusty, but presently I own an old 60mhz analog scope. In your experience - which of these two 4-channel models would you recommend? I'm torn between Siglent or Rigol currently, but open to suggestions. Just trying to get the most bang for the buck basically. Siglent 1204-XE Rigol DS1054Z Thanks again for your advice!

@dtiydr 8 ай бұрын

Siglent is a little better brand and much more like the button layout on them as well. What many do, as well as I did, is that buy the 1104X-E for a much cheaper price and then with a software key (that you can not buy but exist on the internet) "hack" and change it to a 1204X-E and get 200MHz bandwidth.

@faisalnawaz7467 Жыл бұрын

I have same with me in our project to perform IR but it show OL even when perform IR and Resistance bar goes up

@ganzeytyler Жыл бұрын

i know this video is a bit old, but have you figured out a way to export images from these? thanks.

@mse6424 Жыл бұрын

IT has a USB connector on top. Which will act as a normal usb-drive, so you can copy the images to a pc in bmp format.

@ganzeytyler Жыл бұрын

@@mse6424 hmmm, must be something wrong with mine then, ive treid with known good cables and computers, oh well.

@mse6424 Жыл бұрын

The camera has to be switched on...

@ganzeytyler Жыл бұрын

@@mse6424 yup, its on. computer(s) dont recognize it being plugged in (still charges), i can plug an old phone in with same cable and it detects it. its ok, its been well used for 3 or so years, time for an upgrade i suppose.

@ganzeytyler Жыл бұрын

@@mse6424 i ended up tearing it apart and measuring continuity between a usb cable plugged in and the legs on the motherboard, open circuit on data+. soldered in a new usb port and now i can connect it to my computer.

@slime904 Жыл бұрын

Thanks! Quite helpful video.

@autotechnik665 Жыл бұрын

❤️💪Thanks very mutch for the video! 🤗

@Spreefuchs1960 Жыл бұрын

Kurz und knapp das Wesentliche! Danke

@ronaldbardalez6318 Жыл бұрын

It's noisy. Makes this buzzing sound when working

@razmanrhoads2078 5 ай бұрын

Thats why my z313 speaker had buzzing noise when i put this psu in there?

@mrpetit2 Жыл бұрын

Thanks for testing and showing the difference with very low voltage signals👍

@SpeccyMan Жыл бұрын

The 24MHz frequency is only for the sine wave as mentioned in the specifications for this device! The maximum frequency for all other waveforms is considerably lower.

@nathanruben3372 Жыл бұрын

Hello, I subscribed. I hava a question. Eventually, if you were to buy one of them out of your pocket, which one would you choose.

@mse6424 Жыл бұрын

Hi Nathan, i had both scopes for compare and decided to buy the siglent for me. A very little more expensive, but it has a better front-end (the inputs are low noise) and i think the frequency range is a bit higher after modification

@grerlab2777 Жыл бұрын

Thanks for the video... will there be more videos with the use of the UT511...?✌

@mse6424 Жыл бұрын

Hi, thank you for your interest. I´m thinking of more things i can do with this instrument, but right now it's not enough for a new video. (i.e: you can check the leakage current of capacitors.... but be very careful handling the tested caps!!!)

@ahmadclips Жыл бұрын

Very informative video please share reviews of UT 513A

@mse6424 Жыл бұрын

Hi Muhammad, as i bought the UT 511 for my workbench, i have no access to the UT 513. But the procedure will be the same

@ahmadclips Жыл бұрын

UT 513A operation

@SurvivalSquirrel Жыл бұрын

Thanks for the video! What is the difference between the 04 and the 02?

@mse6424 Жыл бұрын

HT-02 has a lower screen resolution, 60x60 pixel

@mortenlund1418 Жыл бұрын

Thanks for sharing. Perfect

@MadaraUCHIHA-hy9xe Жыл бұрын

What's your opinion about the device ?

@mse6424 Жыл бұрын

Hi, sorry for late answer. Though it has limited purpose, I`m quite satisfied with this device. And yes you're right, this type of batteries is a mess :-)

@MadaraUCHIHA-hy9xe Жыл бұрын

Thank you for the review But they should change this type of battery

@30mAkills 2 жыл бұрын

Useful

@jercysanchez8531 2 жыл бұрын

A consult... Test DAR?

@jacquesmertens3369 2 жыл бұрын

Very informative. Thanks. We could of course also decide to stop buying anything from China. That would save us a few headaches.

@spastroboy 2 жыл бұрын

Is there an official website? Firmware update? Also when it's charging but not being used does the led light turn on ?

@takbunthorn6153 2 жыл бұрын

I like your review...... please adding more about the insulation test.

@VictorSchelsinger 2 жыл бұрын

Goob job!

@spicky2966 2 жыл бұрын

Nice video tks

@KAMERKURUM 2 жыл бұрын

Thanks for giving information insulation tester.

@yurkshirelad 2 жыл бұрын

I'm surprised that the siglent doesn't have a proper power button and uses so much power in standby mode.

@robbieaussievic 2 жыл бұрын

.... I turn mine off on a power board after it shuts down. (SDS2352X-E) 4W quiescent standby is unacceptable in contemporary consumer devices. (We travelled to the moon on less than 4W).

@AndersHellquist Жыл бұрын

@@robbieaussievic Yeah, we traveled to the moon with a thing made of sticks wrapped in tinfoil ;-)

@srinivashbhoi2226 2 жыл бұрын

Why its shows OL On Screen.?

@mse6424 2 жыл бұрын

Hi, measuring current or voltage with a multimeter, you have to choose the measuring range on the meter (if it's not a autorange...). Lets say you set the 20V range, that means the meter will show values up to 20V. If you have 21Volts on the meter Input, the meter will show "OL" for OverLoad (the voltage is too high to be displayed). Then you have to switch to the next higher range: 200V. The meter will now show 21Volt. If you are measuring Resistance (Ohms) and the TestLeads are open, the meter will show "OL" for an Open Loop. If you shorten the Test Leads, or put a resistor between (inside the range!) the meter will show the value.

@mihaipopa2330 Жыл бұрын

@@mse6424 OL = Open Loop not OverLoad!!! And has nothing to do with voltage to high but with resistance to high in Ohm measurements.

@pengawaspenyerumalutaubat8365 2 жыл бұрын

Indonesia👏👏👏😊👍

@CatPixStudio 2 жыл бұрын

Great review! Thanks! Is it possible to set the 1st timer to 30sec and the 2nd timer to 60sec to calculate the dielectric absorption ratio? Or is it even already implemented?

@mse6424 2 жыл бұрын

yes, you can set each timer between 5 seconds and 29:30 minutes by pressing the timer button and than the arrows right/left.

@donepearce 2 жыл бұрын

The web server on the Siglent is not the right way to control a scope. The Rigol uses standard protocols which allow it to be integrated into a testing environment along with other GPIB-controlled gear.

@sihilius 2 жыл бұрын

The Siglent can be controlled over ethernet, using the SCPI commands given in the "Siglent SDS Remote Programming Manual" and considering the pricepoint thats quite impressive already. Also I am not so sure if i'd want to use either of these scopes in a Test environment. I'd Probably prefer a techtronix or something comparable for that kind of purpose. Those scopes are probably better suited for enthusiats, students and such, not so much for professional use.