Feelworld Livepro L1 Full Review - Live Streaming Multi Format Video Mixer

[@JonathanJScottFilms]

Check out the feelworld livepro l1 on Amazon USA: amzn.to/2OH8zDh Check out the feelworld livepro l1 on Amazon UK: amzn.to/2OEI5lK

[@rmanning4]

Thank you for your video assistance, I appreciate it. Thanks again!

[@JonathanJScottFilms]

Glad you found it useful

[@rmanning4]

What Brand of External Small Moniker are you using with the LivePro and do you use the input for the microphone? Thank you for your response.

[@JonathanJScottFilms]

@@rmanning4 feelworld f6. There is a review of it on my channel. I wasn't using the mic input.

[@RobertGossCreator]

Nice video, question? What are you using to record all the camera angles? Thanks so much

[@JonathanJScottFilms]

Obs studio

[@RobertGossCreator]

@Jonathan J Scott Films Thank you my brother. I guess my big question is what source do I need to use to display each video screen

[@JonathanJScottFilms]

@@RobertGossCreator Sorry I don't understand your question.

[@RobertGossCreator]

@Jonathan J Scott Films Sorry if I'm not explaining this correctly. Let's say I have all my cameras connected to the Live pro, and I want to record a video and in this video I want to switch between views and show different angles. I know how to use OBS to a certain point. What source do I need to add to OBS to see each display in OBS, Example, Video capture device, seen selection and so on

[@JonathanJScottFilms]

@@RobertGossCreator watch this video here from the 2:00 mark, it explains how to add the device in OBS studio. kzbin.info/www/bejne/jZ6lomqjiJ2qnMU

[@BrotherWatsonofWattsWatsonProd]

good job, very detailed.

[@JonathanJScottFilms]

Thanks, glad you enjoyed it

[@alantty]

Thank you for the video. Do we need to press record on the cameras, or just “turned on”?

[@JonathanJScottFilms]

You do not need to be recording on camera to send a feed to the livepro L1, however, most cameras have an auto power off or sleep function if the camera is not recording, so make sure to disable that when livestreaming.

[@alantty]

@@JonathanJScottFilms got it. Thank you so much for your prompt reply.

[@JonathanJScottFilms]

@@alantty no worries

[@mikedouglas5008]

What input on your laptop do you connect the HDMI output from the LivePro L1? When I plug the LivePro output to the HDMI input on my laptop I don't see anything on the laptop. But the switcher is working ok. I also tried hooking the HDMI Output thru an adapter (HDMI in USB out) and still no picture. What do I need to do or what am I doing wrong? Thanks.

[@JonathanJScottFilms]

Most laptops do not have a HDMI in. The HDMI port on your laptop is only able to output a signal . In this setup I am demonstrating the HDMI output of the L1 goes to a small external monitor and the laptop is connected via HDMI to output a web page and connected via USB to be able to stream all the feeds through OBS studio

[@tejanotv]

Can you stream all 4 camera angles on the screen at the same time?

[@JonathanJScottFilms]

No, I don't think you can.

[@LarryGriggers]

What brand name was the video monitor?

[@JonathanJScottFilms]

It's the feelworld f5 pro. Great little monitor. You can see my review of it here kzbin.info/www/bejne/bWOZqaihdrGUn9E

[@LarryGriggers]

Great, thanks!

[@jonathonrwills1825]

I cannot get anything to work, all but one of my cameras go blank, I cannot pull up anything on the computer and NO NONE has mentioned anything about what to do if this happens how to get a picture on the monitor screen or especially the computer and of course what to do if any of these things fail. I have been at this for days and my first client comes in the morning... I could really use help...

[@gabrielcraciun]

probably your laptop has only hdmi out; plug a hdmi cable from your laptop to livepro hdmi input 4 and you will feed the livepro with images from the laptop; plug a separate monitor to the livepro hdmi output and you will have image on the monitor; not all cameras works with livepro; canon works for sure; good luck!

[@bebertjoachim2420]

HELLO HOW TO CONNECT MIXAGE TABLE TO FEELWORD PRO L1 USING OBS FOR STREAMING.........WITCH TYPE OF JACK IT TAKE TRRS OR TRS

[@gabrielcraciun]

Please recommand cameras; not all cameras works with livepro l1; what cameras have you used for this video? thank you!

[@JonathanJScottFilms]

Panasonic gh4 and gh5. In theory any camera that can send out a feed over hdmi should work with the livepro L1

[@gabrielcraciun]

@@JonathanJScottFilms thank you! have you tried to use webcams?

[@JonathanJScottFilms]

@@gabrielcraciun no sorry I haven't

[@sfcnetworkministries]

major problem upgrading he software can you help

[@alzahed]

How do i switch on the livepro? By the power cable?

[@JonathanJScottFilms]

yes, there is no power switch on the unit, as soon as the power supply is on the unit will be on

[@ccstudiografi]

Pengen sekali punya seperti ini tapi tidak mampu beli 🤲

[@HousamEllethy]

Thanks for the video. But to have a full honest review you have to mention the static noise in your video which is pretty obvious . And how useless are the in and out audio ports. I used an amplifier with it, still getting very low audio signal. I had the same static noise problem but much worse. It ruined a gig for me. I tried 2 Units with the same problem. Don’t buy rubbish gear. Invest in better equipment. Get atem mini or pay a little extra and get atem mini pro which is an audio mixer by it self, So you save your self money if you want to get both.

[@JonathanJScottFilms]

For the price point i didn't see a big issue with it. It is a budget device for people wanting to get started in streaming, so yes i'd agree if you are doing professional work you're likely better with a higher end unit and dedicated audio desk.