FeiyuTech AK2000S Setup, Tips, Balance and Review. EVERYTHING YOU NEED TO KNOW

[@FrankP83]

Evan you can attach the L screwdriver to the bar to attach, and you can put the 3 screws inside the handle...you can unscrew the bottom of the handlebar and put in it !

[@lordace8806]

This is the best non confusing tutorial I found on this setup thank you

[@michaeltylermedia]

I just bought this bc of your review. Fantastic breakdown of everything. I’ll be watching this again once it arrives!

[@JangLilBitofErrthang]

keep the screws inside the handle and secure the allen kwy with the magnets on the handle

[@jameskrause4606]

Excellent video. VERY helpful. Just one note. Regarding the screws and the allan wrench that are needed for the optional handle, there's an L-shaped magnetic slot built into that handle for securely storing the allan wrench, and you can unscrew the cap on the end of the handle and store the screws inside it. I find this to be practical and convenient storage solution for these items. Thanks again for the great video!

[@ulrikeschuster3074]

Thank you for this video - its the most valuable information on the FeiyuTech AK2000S that I could find so far - I haven't watched more of your tutorials yet, but I will! Great work. Best regards from Munich

[@RyanMatta]

Great Video Evan, I’m just starting to Scale my Newest KZbin Channel, thanks for the great tips and training, I’m taking this to Mexico with us tomorrow and I was having some issues getting this stabilized for some reason. This videos helped out drastically! I also agree with the quick release. I just leave mine on! Good vibes always my friend. Just subscribed and love your work. If you ever adventurou to Michigan let’s go out and shoot something! I’ll be looking forward to watching more of your work!

[@virginiejoncas7470]

I really needed this! Thank your for the clear explanations

[@AntonandSinan]

Shopping for a gimbal, been looking at this one for a while. Thank you, the decision has been made. :) We look forward to shooting with this in our future travel episodes

[@seanhomar5945]

Allen key is on handle and is magnetic so not losing that, and the handle end screws off with a compartment to keep your screws so shouldn't lose them either.

[@stryker1005]

AK2000S gimbal has various cables and one of them is for charging. My problem is I have this cable for charging, the USB 2.0 to Type C( C01) but where is the charger??? Can this be compatible to any charger like my MacOS charger or my cell phone charger? There are specs for these chargers and I am hesitant to connect the cable to any of my chargers for the reason that I don't know which chargers are compatible to charge the gimbal. I hope somebody could help me in this situation.

[@sab605]

Nice informative video. Steve and Jayne

[@3HO]

Thank you very much for your work. This helped me a lot !

[@EvanThomas]

Glad it helped!

[@cbengua]

Does it can control zoom and focus using the Sony 18-105?

[@eagtmlimwawest]

sory, does it fit with canon 5d mark 3??

[@christophersmith-zn2kn]

Tried setting mine up and the first three balance settings no problem. The last balance setting is a no go no matter what I do.

[@foodtravelentertainment4671]

Good 👍 Information Fj Ak 2000s Thanks

[@zietsky750]

Where do you buy the replacement battery?

[@danielyakimov7073]

Hey there :) Nice tutorial, really detailed. But i have 1 problem. I can't balance the roll axes (the middle one) Whatever i do it still cant get balanced and the camera doesn't stay in place. I was able only to balance it to stay horizontally and when i move it , it just comes back on the balanced point. When i switch on the gimble it does not work. Please any1 can help ?

[@jimvercphoto]

Same here with AK2000C.

[@hanilb]

@@jimvercphoto same here, in combination with an canonen eos R6 - who can help

[@MorpheusTheBro]

Hey does anyone know if the sony A6400 with the tamron 17-70mm lens will work with this gimbal?

[@meekalhalabi8748]

Hello, can you shoot with the camera vertically?

[@danb5058]

Another important feature is the payload auto calibration that can be set after it is balanced. I think that was not a part of this video (but apologies if it is).

[@robbyvisuals7711]

I have a gmaster 24-70 can’t get it to balance is it too heavy ?

[@fahdfahd5485]

A rumbles of a good video.

[@CHMARKHELMEHDI]

good work from morocco

[@VidasAkmantas]

FINE.Saterday i make vedding with this gimbal.Canon EOS 80D AK2000S AND Senheiser 440 stereo

[@olakunlesmith1092]

Interesting product. Please can we see a detailed review video like this on the Feiyutech g6 max? I hope am not asking for too much!!!

[@sethmonroe9434]

My AK200o simply won't balance. On the first pivot point you showed, my camera keeps falling backward. I've adjusted the base plate as far forward as I can, and still, It will fall backwards.

[@danfuerthgillis4483]

If the lens is short you spin the mount around pointing to the top motor this will take weight off the front.

[@gramslam6307]

There is a magnetic holder for the Allan key, and you put the screws in a bag inside the handle. Never gets lost…

[@krisadasirisingha1928]

can this gimbal carry sony NEX 5????, how about the stabilization on it?? Tks bro 😘

[@eandgtech3974]

Yes it can. That's what I use with this gimble.

[@eandgtech3974]

You just have to make sure it's all the way over on the slider plate and you don't have a neck strap on it

[@krisadasirisingha1928]

@@eandgtech3974 tks so much bro 😍

[@TheOscardominguez24]

Hello someone has updated firmware succesfull? my gimbal doesnt turn on now :(.... help please

[@whyfpv773]

Nice👍

[@jamesgold9675]

Hello evan I have seen your videos for a long time now and I really like them .and just saw a old post of yours where you say that your an atheist would you make a video about why you are an atheist please