🔧 The hex hole modification trick of a Victorinox RangerGrip / is this bit holder stable enough?? 🔩

In this video i show you how i open the hex hole on the front handle of a Victorinox RangerGrip. After the modification i make tests with every layer who helps to support the force of the hex shank under load. With this tests i can give you a feeling how much force the improviced bit driver of the RangerGrip 79 can absorbe. At the end i show you a simple trick how you can improve the stability of this bit driver system.
💥Project Videos, where i use the RangerGrip Hex Hole as Bit Driver 💥
👉Unique way to craft a Rocket Stove with a Victorinox SAK
• Unique way to craft a ...
👉 The Swiss Army Knife Viking Chair
• The Swiss Army Knife V...
How the replace the scales of a Swiss Army Knife
👉 Do you know the Victorinox scales replacement trick? (Hot Water Trick)
• The Best Way to Remove...
👉 Victorinox Online Shop: www.victorinox.com
👉 Links for my books, Swiss Army Knives and equipment below
👇👇👇
🇩🇪 🇦🇹 🇨🇭 Mein Amazon Shop: www.amazon.de/shop/feliximmler 🇺🇸 My Amazon Shop: www.amazon.com/shop/feliximmler 🇬🇧 My Amazon Shop: www.amazon.co.uk/shop/felixim... ➡️ Instagram: / feliximmler ➡️ Facebook: / felix.immler ➡️ Website: feliximmler.ch
Used Knife: Victorinox Huntsman

[@HieiKirisame]

I love how in every video you explain safety issues that could occur when people try to imitate your modifications, teach how to correct them, and reveal the drawbacks of making such alterations. You really SHOULD be a spokesperson for Victorinox at this point.

[@FelixImmler]

Thank you very much for this wonderful compliment!

[@mrhalfstep]

Felix, I did this hack to my Ranger back when you first demonstrated it. I felt like I knew what you were going to reveal as the "secret" at the end of the video, because I discovered that problem with the chamfer myself. I use auger bits and spade bits as well as all the various Torx, Allen, and screwdriver bits, and as a result, I've found that many of the bits that have the locking grove cut into their shaft don't get much support. That under-cut in the shaft will line up with one of the support layers and that layer won't grip the hex shaft and you lose strength. The best solution that I came up with was to modify a small bit holder by cutting the shaft off and leaving just enough of it to reach all the way down through to the saw spring layer. I made the end very flat as you recommended in this video and I got rid of the under-cut by cutting it off. It does require carrying one more piece of kit, but it also gives you maximum strength with any bit. BTW, have you ever used auger bits instead of the spade bits? I feel like they take less effort. Thanks for making my Friday better, once again! Ciao!

[@FelixImmler]

Your comment is super interesting... thanks a lot!!

[@outlaweduk]

was going to mention flattening a bit holder then you only flattening one bit rather than going through a set

[@urielalbertosanchezm]

Thanks to you, my old damaged Victorinox is now renewed with a lot of modifications

[@FelixImmler]

I am happy to hear that!

[@alanbierhoff6831]

Felix, I’m running out of adjectives to describe your creativity and ingenuity 😊

[@FelixImmler]

Haaa ha haaa this compliment is wonderful! 🤣🤣🤣

[@cavemandanwilder5597]

Time to start smooshing words together so you can make new words to describe with.

[@QuantumMechanic_88]

Genius.

[@aarde7036]

I totally agree! Every time he amazes me and so many others, that is more than wonderful!

[@jurgruedi8210]

Schön, dass du auch immer an die kleinen Dinge denkst, die einen echten Mehrwert darstellen. Besten Dank!

[@FelixImmler]

Danke für das schöne Lob!

[@feralgrandad4429]

this is the model knife i treated myself to on my holiday to Geneva when i visited the flagship store there. I was already going to do this modification but the other youtube videos were not great on how to do it. Now i feel super confident to do it. Thankyou so much Felix.

[@FelixImmler]

Thank you very much!

[@adammcguinness9950]

I’m glad you addressed the chamfered base on the bits. The last hole is the most important for strength.

[@FelixImmler]

Thank you Adam!

[@bobpadrick7718]

Flatten the chamfer ... GREAT TRICK! I watched this video even though I have already made this mod to my Ranger Grip 57. Boy am I glad I did!! After making the mod, I noticed, like you show, that the bit does not go *through* the liner lock layer because of the tiny protrusion of the saw spring. I also noticed that the bit wiggles a little, but I thought it was at least going *into* the liner lock layer. Now I realize that, because of the chamfer, it does not. Wow!! I can't wait to flatten the chamfer and have a much more robust tool. Thank you! Thank you! Thank you!

[@FelixImmler]

Your comment makes me happy! Thank you Bob!

[@Aco747lyte]

Dear Felix, how you inspire me to make better things! Every Friday I look forward to you, though it has to be evenings now since I was given clearance to join the helicopter emergency service, but a couple of SAKs always accompany me. You are so clever; artful, too. Thank you so much, as always, *Hugs* ~ Wendi 🌻🌻🌻

[@FelixImmler]

Thank you so much dear Wendi!

[@micha5645]

Hallo Felix, das habe ich nicht gewusst, dass das RangerGrip eine Bitaufnahme hat. Du hast die techn. Feinheiten sehr gut erklärt! LG Micha

[@FelixImmler]

Danke für das Lob! LG

[@edwardfletcher7790]

I find your explanations & solutions so incredibly satisfying 👍😆 Thank you Felix !

[@FelixImmler]

Hello Edward. Thank you very much!!

[@Cosmo_88]

Thank You Mr. Immler for your very novel ideas. Happy Holiday Season.

[@FelixImmler]

Thank you Cosmo!

[@Waldhandwerk]

Sackmesser Scientist! Alle Achtung mein Freund! Danke wie immer für deine unerschöpfliche Kreativität! Viele Grüße Sepp

[@FelixImmler]

Danke lieber Sepp! Dein Kommentar freut mich wie immer speziell! Ich wünsche Dir ein schönes Weekend!

[@BUZZKILLJRJR]

I loved this modification! Its hidden gem! I always use a bit driver but only for the small tasks. Im going to be getting a ranger grip soon so i am ver happy to see this😊

[@KettleCamping]

I had made the modification on my Rangergrip 57 based on your older video. Thanks again for even more info a details on that great option. Cheers! 👍

[@FelixImmler]

Thanks for watching!!

[@giuseppeiaria6564]

Great video Felix, very precise and complete, as always.

[@FelixImmler]

Thanks a lot Giuseppe!

[@BigTVideos]

Excellent video very descriptive. Very helpful. Good job.

[@erebostd]

Ha, das wusste ich noch nicht! Danke fürs zeigen 😁👍

[@maxlvledc]

Another great mod! Gratz on 200k!!

[@FelixImmler]

Thank you so much my Friend. Watch this kzbin.info/www/bejne/jKe2gqdqmK9pqZo :-D

[@WayPointSurvival]

That is so excellent! That definitely makes a lot more options available in the backcountry. Thanks so much for giving a complete understanding of how this works and how to modify it so it works better. Have a great one, my friend!

[@FelixImmler]

Thanks you very much my friend! Your comment means always something special to me!

[@Kungfupau]

This video seals the Deal because I was hesitating to buy a ranger grip! Now I have all the more reason to get one! Thank you!

[@FelixImmler]

🤩 super! Thanks!

[@Swimdeep]

Thank you for all the detail, demo, and testing. You make innovation easy. 🌿

[@FelixImmler]

Thank you very much!

[@Jon_Hing]

Thanks for this video Just did it on my Ranger Grip 78 and it works like a charm

[@FelixImmler]

Super!

[@MasterYoist]

Greetings Mr. Immler. I posted a video on this three months ago with a very easy way to open the hexagonal hole. It really takes only about 15 - 20 seconds and comes out very clean without any drilling or any filing. I made another video - basically a sequel - comparing the depths that each of three RangerGrips allow a bit to set in the handle of the knife. The Boatsman comes with the bit driver exposed. The RangerGrip 71 Gardner has the same amount of metal supporting the bit when the hole on the scale is opened. The RangerGrip 79 does not allow the bit to set as deep and has less metal supporting it. Basically, they all will work with a variety of bits as long as we don't over-torque them. I like to use mine with regular drill bits when the reamer is not adequate to get the exact size hole that I want. I only do light drill applications and don't really recommend any heavy-duty type work. Cheers. How I do my bit driver mod kzbin.info/www/bejne/iIOupKGln9-Fiac Depth comparison kzbin.info/www/bejne/jnnTlHaeba2rqdk

[@FelixImmler]

Super… Thanks a lot for your interesting links!

[@MasterYoist]

@@FelixImmler You are quite welcome. I hope someone finds them helpful. Take care.

[@TheDarkSkorpion]

@@MasterYoist I found them helpful. Thank you.

[@renem.3413]

Dear Felix, thank you again for surprising me with "hidden" tools in Swiss Army Knives. I like the modifications you show - especially on my favorites, the 111mm Victorinox in the last weeks. Have a good start into the weekend. Greetings to Swizerland René

[@FelixImmler]

Thank you very much dear Rene!!

[@lisuk66]

👋💥✌️Hello, Felix! Thank's again and again for great ideas 👌👍👍👍!

[@FelixImmler]

Thanks for watching!!

[@lisuk66]

@@FelixImmler 👋🔥💪✌️

[@stuartlockwood9645]

Hi Season's greetings Felix 😊, this is a great tip, I never knew the hex hole was already in the liners, and the shape in the inside of the handle made it easy to cut out. Thanks for another interesting video my friend, stay safe, best wishe's to you and your's, Stuart UK.

[@FelixImmler]

Thank you very much dear Stuart!

[@bernardviau1795]

Great video Felix.

[@ralphonearth3101]

👍👍👍Best modification yet. Saving serious pack weight by not needing scotch eye auger.

[@FelixImmler]

You are right!

[@RatdogDRB]

This is a good one, Felix. Well done. Thank you.

[@FelixImmler]

Thanks a lot for this positive feedback!

[@johndoe-se5ky]

Comme toujours EXCELLENT !!!

[@FelixImmler]

Merci bien!

[@billcraig9977]

Really clever…. As always, thanks for the explanations and the instructions, Felix!

[@FelixImmler]

Hello Bill. Thanks a lot for watching. Greetings from Switzerland!

[@billcraig9977]

@@FelixImmler Merry Christmas, Felix! and best wishes for 2023!

[@irvsstella]

Great vid, I was literally going to get this knife this weekend. Thanks for the tips. 😊

[@FelixImmler]

Thanks a lot for watching!

[@WARPSPD]

I now have to buy this knife just to do this project ! 👍

[@FelixImmler]

Thanks a lot for your comment!

[@franmomo5972]

Excellent, thanks for that good explanation

[@FelixImmler]

Thank you very much!!

[@MySk911]

shake your hand! 🤝🤝🤝 Thanks for the great ideas and implementation!👏👏👏

[@FelixImmler]

Thank you very much!

[@s_antony_p26]

всё понятно. Но главное честный тест. Спасибо!

[@vladimira.shestakov2493]

Sooper cool! Thenks man!

[@FelixImmler]

Hello Vladimir. Thanks a lot for watching!

[@siegfriedwashburn3484]

Very nice video! Watched with the big interest and pleasure! Go on!

[@FelixImmler]

Thanks a my friend!

[@jerrystark3587]

Nicely done. Thank you. Happy Holidays to you and yours!

[@FelixImmler]

Thank you so much dear Jerry!

[@willikebari5478]

Eine praktische Modifikation, Danke für's Zeigen! 👍👍👍 Liebe Grüße aus Wels!

[@FelixImmler]

Liebe Grüße zurück

[@Dadoimp]

Omg your videos, man! Sooooo goooooodddd!! 👍👍👍👍👍

[@FelixImmler]

Thank you!

[@johnearhart8811]

Amazing the time you spent with your videos. Congratulations

[@FelixImmler]

Thank you John!

[@thomaschainey533]

Great video thanks. One more reason I am glad I have the Boatsman as I have less to worry about.

[@1zaj34]

Oh, Felix, thank you so much for this video. Now I can point this out to anyone planning to do that modification. 🙂 And, apparently I'm learning patience on my old days. During the whole video, I had the urge, to write a comment about the 4th layer not supporting the tool, because of the chamfer. Luckily, I watched 'till the end first. 😀

[@FelixImmler]

Thank you very much for your patience 😂😂😂

[@nauticalknotcraft]

Hello Felix. I have the Ranger with the Phillips screwdriver. This is a great mod to a very handy multi-tool. I really appreciate your attention to details. Thank you. Love this series. All the best.

[@FelixImmler]

Thank you so much for your compliment!

[@RobEvansWoodsman]

Excellent video, thanks for sharing.

[@FelixImmler]

Thanks a lot dear Rob! I learned the Mors Kochanski splitt from you!

[@jamesbarisitz4794]

Great use of a hidden feature. Nice work Felix.

[@FelixImmler]

Thanks a lot James!

[@user-jg8jy8ff3o]

Wow, that's awesome 😃

[@FelixImmler]

Thank you!

[@adrianp6069]

super cool tip! keep up the good work! :D

[@FelixImmler]

Thanks a lot Adrian!!

[@SpartanJohns]

I did not know about this! Now..the only Ranger I have is the one you sent me...so I won't attempt it just now....but definitely a good mod! Not just for bushcrafting purposes but(in my case) for taking apart knives and multitools. I carry small bits with me but always used a pair of small pliers. I feel that this would definitely make more sense! Great stuff my friend!

[@FelixImmler]

Thank you so much my KZbin buddy from the very beginning

[@mikecurtis2585]

Great mod I like the way it works! Very nice 👍

[@FelixImmler]

Thank you so much dear Mike!!!

[@tdg0101]

Great stuff thanks!

[@FelixImmler]

Thanks for watching!

[@QuantumMechanic_88]

Calculating the torque value of the combined thicknesses of the liners is intelligent. Removing the chamfer is also a smart idea. There are small sockets which use a 1/4 inch driver and I imagine that the 1/4 inch shank from a drill could be used as a socket driver . Bicycle tool etc. ?? Thanks once again for another intriguing engineering tutorial and all the best sent your way Felix.

[@FelixImmler]

Your comment makes me happy! Thank you so much!

[@Cosmo_88]

@Quantum Mechanic - Great idea mate!!

[@QuantumMechanic_88]

@@Cosmo_88 Thanks for your input regarding the cutting of stainless-steel using laser.

[@will.scotnativeingreece]

Hi Felix, very interesting, i was totally absorbed in that, good stuff. Cheers Will.😊😎

[@FelixImmler]

Thank you so much!!

[@davekelly9657]

Felix, you are truly the master of the SWISS army knife 🔪👍👍⚓⚓🇺🇲🇺🇲

[@FelixImmler]

Thank you Dave!

[@josercarlucci]

Great Felix!!!

[@FelixImmler]

Thanks a lot my friend!!

[@archivist17]

More wonderful skills!

[@FelixImmler]

Thanks a lot!

[@AG8000]

Sehr interessant. Danke.

[@FelixImmler]

Danke für das Lob!

[@xazakotr]

Great! Thank you!!!

[@FelixImmler]

Thank you!

[@gator83261]

Great tip.

[@FelixImmler]

Thanks a lot!

[@carlosmola9388]

Vielen dank für deine tipp!

[@FelixImmler]

Sehr gerne!

[@balmungt5759]

Wie immer top👍👍👍🍀Danke Dir😉

[@FelixImmler]

Sehr gerne 😊 Danke!!

[@tonynapoli5549]

Felix you are a wiz very use full informative video as usual I think I’ve said this before my EDC is a Swiss Army knife a powerful small but effective tool. Thanks Ciaooooo 👌

[@FelixImmler]

Hello Tony. Thank you so much for this wonderful compliment!!

[@gabrielk.b9003]

FELIX, SUA IDÉIA FOI EXCELENTE OBRIGADO POR MAIS UM VÍDEO, THAU !

[@FelixImmler]

Obrigado pelo seu bom comentário!

[@gabrielk.b9003]

Obrigado você amigo sempre acompanho seus vídeos gosto muito dos Victor inox e suas história de fabricação!

[@kingsclownvideos]

Awesome. Thanks

[@FelixImmler]

Thank you so much!

[@RudiBeragam]

Good evening sir, you are so creative, success is always with all your works.

[@FelixImmler]

Thank you so much!!!

[@mnmikeoutdoors8595]

I saw another video creator do this mod. I love the idea but I knew you would have some more info. Thanks. Now I have confidence to blow up my warranty. Boom 💥. Boring holes is more important to me than any screw driver capabilities but still , a guy could need to use a screwdriver in the woods.

[@FelixImmler]

Thanks a lot for your interesting comment!

[@dicknormandale2529]

I have a small set of 8 wood drill bits (up to 1/4 inch) designed for fast interchange with a hex bit driver in an electric drill. This modification and these drill bits which weigh very little would be a great addition to any kit for bushcrafting when you want to put holes in wooden handles, etc., for cordage or when you want to use dowels to hold wooden components together. Great video, Felix, I'm always amazed at you ideas!

[@FelixImmler]

Thanks a lot for your interessting comment!

[@grovesy333]

I really enjoy your channel lad I find a new use for my blue climber everyday ! I might get the ranger grip with the corkscrew for camping next

[@FelixImmler]

Thanks a lot for your kind comment!

[@grovesy333]

@@FelixImmler You’re welcome Felix !

[@AliakseiUstsinau]

You are so positive, so it's a pleasure just to watch the video, even I'm not a fan of the knives

[@FelixImmler]

Thank you Aliaksei

[@Philobiblion]

Felix, you are a genius. And I don't mean a 'cracker-barrel Voltaire'. You really are a genius.

[@Chilli101]

Hi Felix, amazing and informative video as always! Have you thought about going through your collection of stock and modified SAKs? It might be interesting for a lot of people to see the collection you have and which ones you have modified and showcased here on KZbin over the years. Best wishes and enjoy the holidays :)

[@FelixImmler]

Thanks a lot for your inspiration!!!

[@MichaelR58]

Good video Felix , thanks for sharing , God bless !

[@FelixImmler]

Thank you so much dear Michael!

[@aldocordoba4486]

Muy bueno su trabajo, felicitaciones. Saludos 🇦🇷

[@FelixImmler]

Gracias mi amigo

[@MutsPub]

Nice. Thank you.

[@FelixImmler]

Thank you!!

[@scenicdriveways6708]

Very good video my friend, thank you for sharing it. JT

[@FelixImmler]

Thanks a lot for watching!!

[@enriconebbiosomartini]

thank you very much!

[@FelixImmler]

Thanks for watching!

[@ddblairco]

very good video

[@FelixImmler]

Thank you very much!

[@mannihh5274]

Right at the point ! Very important to know, where the weak points are and eliminate them as much as possible. I'd go even a step further: all long tools like bit-holders, drills etc come with a groove near the end. It's ment as a breaking point when used with a power drill. When used with a hand tool, it's useless, so I'd cut it off (reduces lenght and weight too). With a very crisp 90° edge it may get fiddly to insert it, so I'd do a very small chamfer, but to get the full advantage of the 1,2mm layer, I'd open the saw, so the next layer (#5) will be the stop. Stay safe and enjoy Xmas time

[@FelixImmler]

Your comment is super interesting... thanks a lot!!

[@jg1264]

Super genial!👌

[@FelixImmler]

Vielen Dank!!!

[@Jib230181]

Man I well want to do this to my Ranger grip. I bought the hex wood drill bit for it but I got scared in the end to pull my Ranger apart and do it lol 😂. Got to get the guts to do it but I know I’ll mess it up I put money on it. I’ll send it to you Felix ok lol 😂. Great video mate. You and family stay safe.

[@j.l_vqtqv9908]

Muy buenas amigo mío 😉 me a gustado la opción de poder aplicar la herramienta es una idea muy buena 😃 como siempre gracias por compartir y a seguir así de bien salud/os 🍁🇪🇦

[@FelixImmler]

gracias mi querido amigo de españa!

[@margueritemitchell1829]

Hello from British Columbia Canada ❄☃️🎅☃️❄🇨🇦🖐👍♥️🛣🚐🚐🚐🏕🔥🏕

[@FelixImmler]

Thanks a lot dear Marguerite!

[@girak2]

And... 7 months after this video was published, the Victorinox Venture was released. It's interesting to see the correlation between these videos and the design of the venture. I appreciate the influence you have on Victorinox! I like the Ranger Grip knives, but I think they have two flaws. First, the only blade can't (and isn't) be sharpened closer to the pivot due to how the blade stop is designed. And second, there is no small blade similar to what the 91mm versions have. Because of this, I have to put more force into my cuts because the cutting edge is farther away from the handle. This modification makes this tool more useful, but the blade is annoying. Thank Felix for another great video!

[@puppiesarepower3682]

Felix you are a real life MacGyver; all you need is a Victorinox.👍

[@FelixImmler]

Thank you very much!!

[@qsdvb]

Hi Felix, love your videos. The thumbnail reminded me of a mod/ adaptation I made. The hex bit holder from lidl reminded me of it. If you ever see the mixed washer sets in lidl the smallest split locking washer makes a great replacement ring for any swiss army knife. I have damaged a few standard split rings over the last few years. The smallest locking washer in the lidl set has a nice spring tension without being brittle. You can open it with 2 pliers to fit it to the knife and then the cut in it is ideal for creating a near seamless joint when you correct/ straighten the washer after fitting. It has enough spring to reset itself after being shock loaded without the joint opening and releasing the knife. Also the thickness of the wire (square profile) in the washer washer is a very good match to the hole in the frame piece.

[@qsdvb]

Meant to add that the split ring on the ranger grip in your thumbnail was damaged which also reminded me of the fix as well as the hex bit holder.

[@FelixImmler]

Sorry... i didn't understand your modification. But it sounds very interesting...

[@jimpublic]

@@FelixImmler ich glaube, qsdvb meint den verbogenen Schlüsselring auf dem Thumbnail, er hat festgestellt dass der sich durch eine Federscheibe ersetzen lässt (die kleinste aus dem Lidl-Sortiment)… wenn ich’s richtig verstanden habe. Gruß Ivo

[@ryans927]

Hi Felix first of all I want to let you know I love your videos I’m always very entertained and I have learned so much from you. My wife even enjoys watching too. My question is which do you prefer. Rangergrip or forester/ Trekker

[@willowufgood1254]

Tanks Tchao

[@FelixImmler]

Thanks for watching!

[@finanziker]

Hello Felix, haha, dini Idee sind super! Ich wär no nie of die Idee cho es Victorinox Messer abzändere.

[@FelixImmler]

Dankä für Din Kommentar!

[@StonyK]

Moin Felix, das ist ja mal eine geniale Idee. Ich habe noch ein altes Wenger Ranger und auch da ist dies möglich. Es geht sogar noch viel einfacher als du es gezeigt hast. Ohne bohren und feilen. Einfach den Stechbeitel vom Swisschamp oder Handyman nutzen. Der hat genau die richtige Breite um das Hexagon auszustechen. Einfach von der Innenseite in die Längskanten und durchdrücken. Passt sofort ohne Nacharbeit. Liebe Grüße Thomas

[@FelixImmler]

Danke für den wertvollen Tipp!

[@juliobarba8807]

Mr Felix, thanks for the brilliant demonstration of finding the secret hole and the explanation of why 3 layers of the ranger grip 55, 79, onyx and wood, I found that you can use the Leatherman Raquet and bit extender are better to use and because you have to points of the hex hole you can have 3 layers complete and you can have only a small hole and a stablel bit tool, do you know if the wood scales also have the precut hole, thanks I enjoy your videos, thanks

[@jinxjones5497]

Ahh, ive seen this before somewhere. I wondered when you would cover it

[@FelixImmler]

Thank you my friend 😆

[@dennislindenpellinge]

Yep Yep ! 😄👍

[@FelixImmler]

Thanks a lot dear Dennis!!!

[@xoxxox5352]

Hello Mr. Immler, I finally subscribed to you after watching many of your videos. Thank you for all the tips and tricks. I have an idea for creating the ultimate 130mm tool by combining: Pliers, Marlin Spike, and one-handed Serrated Blade from a V. Boatsman Scissors and Wood Saw of a V. Gardener Scales with tweezer and toothpick (with hex mod), Gutting Blade, and one handed Plain Blade from a V. Hunter 58 Metal File from a Wenger Ranger 70. Locking Screwdriver and Bottle Opener from any Rangergrip Back Tools: corkscrew, reamer or awl, and Phillips screwdriver I have all of these knives already, and I keep looking at them, trying to figure out if such a combination for this monster is possible.

[@FelixImmler]

Thanks a lot for your inspiration!!! This tool sounds interesting

[@matthausfrick5971]

Hi Felix, great video! I think I will `frankenstein´my Ranger aswelll :D Your spat bits look super nice, especially that they have the little screw tip seems to be very helpful since they will pull themselves in the wood. What kind of drills do you use?

[@FelixImmler]

Das sind Würth Flachbohrer

[@kilianhzh]

Dear Felix and everybody else, there is a really easy way to do the mod. You can do this mod just using one tool. With the Reamer you can easily drill a hole in the middle of the hex inlay and carve out along the edges, regularly trimming the rubber on the front with the small blade of a SAK. mine took less than 5 minutes

[@19stegachev66]

Я просверлил отверстие ø3мм в центре шестигранной штамповки, прикрепил накладку к ножу, а затем проплавил накладку раскаленным хвостовиком шестигранной биты 1/4. Расплавленная пластмасса создала замечательный канал из которого, бита или перовое сверло не будет выпадать. В Вашем случае, хвостовик шестигранника болтается в отверстии.

[@srtgrayfrance]

I remember the rocket stove video, I won the knife :)

[@FelixImmler]

Super! :-D

[@AmetraWayofLife]

Hi Félix, and a torque test with a toque wrench? 😉 Great video! Greetings from Spain!!!

[@FelixImmler]

Yes.. you are right. But i didn't want destroy my knife...

[@AmetraWayofLife]

@@FelixImmler Is true...Thanks!!!