Fender Deluxe Reverb Restoration - 1966 Vintage

Welcome back to Tone Twins TV. This Week Huw tackles a lovely old 1966 Fender Deluxe Reverb on the work bench, giving it good check over and a couple of tone tweaks.
Please subscribe and stay tuned for lots of new content coming soon!
00:00 Intro
01:20 Filter Capacitors
07:18 Mains Wiring Correction
11:24 Capacitor testing
22:25 Bias Check
24:43 Input Socket Cleanup
25:46 Outro
27:Amp Demo - using a free dowloaded backing track ;)
Thanks, Huw and Ed

[@chrisdrake447]

Hooray! The Tone Twins Are Back In Town!!!!

[@icedog75]

Great to have new content from you guys...Thanks! Capacitor tube trick is also used by "Uncle Doug" although he makes wooden discs (painted black) to take up the space on both ends of the tubes.

[@davegallagher7428]

Good to hear from you again. Both of those guitars sounded sweet through that amp!

[@bobhewitt5047]

Superb, interesting and informative presentation as always.

[@njuham]

1966, that's as old as me!

[@stevetillyer1053]

Great sounding amp! I like your minimalist ( only if nessesary) approach to amp servicing. The only thing I may add, is the Sprague TVA series 16uf electrolytics tend to read higher than their stated 16uf value. I rarely find them under 20uf. They are also very expensive now. Tripled in cost. I’ve switched to F&T now. Great caps. Great work! Cheers.

[@tonetwinstv2863]

Thanks Steve. I measured the ones I bought and they were all around 16uF - H

[@russellesimonetta3835]

Uhh the old electrolytics were larger and fender put a foam strip to hold the caps secure. Modern caps are smaller so tecks use a dab of silicone to affix the cap down. Relying on the leads and solder joint to hold the caps in place sitting upside down in a vibrating environment isn't great for longevity! But it wiil work,, but there is better practice! Those old elertolytics aren't holy grail!!! They are fifteen year operating life component that are coming up on 60 years old!!! Replace!!! Restuff if you must.

[@tonetwinstv2863]

Thanks Russell. Rest assured, the underside of this amp's cover had fresh foam and all the caps are pressed down firmly.

[@davidjennings9253]

An excellent video again. It amazes me how well those old 50s & 60s capacitors can still be good. My 65 Vibro Champ is still running on all the original components but I have a set of replacements in stock just in case. I don't have your fancy meter to check them with but there are no visible blisters showing on the insulators. Would you recommend changing the filter caps anyway?

[@MrDavymoore]

Hi Huw - any chance you could post a link to the free backing track? Thanks!

[@raydowley1038]

would have been nice to see what voltage was left in the caps before drawing Doh!!

[@mtbmadman011]

Please don’t use masking tape on amplifiers. It dries out, leaves residue and will alter the color and finish of the metal in 10 years when one removes doghouse again.