Рет қаралды 36,278
I overhauled a Fender Japan Stratocaster by polishing the parts, replacing the frets, and replacing the nut.
It was made in 1982, so it's 39 years old.
I was able to touch this precious Japanese guitar.
BGMProject2 (Shunnosuke Kaneko) "Bar with Sherlock".
/ syunnosukekaneko
/ @user-kh4ce5zx5m
Parts and tools used
Wera Kraftform diamond screwdriver
amzn.to/2ZVG6MB Number 2 of +.
amzn.to/3iVTl7u + number 1
TONE Power Grip Screwdriver Set PLPGD6
amzn.to/2Q5MrRr
VESSEL Precision Hex Drivers
Set, amzn.to/2O6hFoC
1.27(inch)amzn.to/2X4xBvQ
1.5amzn.to/34KDAZs
Fret Polishing 3M Sponge Polishing
320-600 amzn.to/2YC5c0k
800-1000 amzn.to/2JnIEd9
1200-1500 amzn.to/32iG29c
Metal Polishing also Picard
amzn.to/32Ip7f7
For masking tape, 3M is good. For high frets on guitars, 6mm is recommended.
amzn.to/32H0gZ9
Dremel 4000 rotor. Great torque, but hot! If you can, get a 4000 because it can do a lot of things.
amzn.to/2Kh3NH5
I heard there is a new one called 4300. If you can use the base plate of a StuMac, this might work too.
amzn.to/3712F48
3M body polishing compound, this is enough for a guitar.
amzn.to/34WHuhO
It's good to have a lot of stuff, orange English oil for fingerboard
amzn.to/2Kh4G2n
This cloth is very good. Recommended. Seriously.
amzn.to/2PRUJM8
Website
pedaru.wixsite...
Twitter
/ andybassguitar
Facebook
/ andybassguitar
Instagram
/ adachi_andy_koki
#Fender
#Restoration #ASMR