Fermec 760 digger walk around

[@sarahdavelanguages4388]

Thanks very much for uploading this video we have just bought a 860 and sat trying to work it out for a few hours. This video really helped, we are looking forward to using it. Thanks again for taking the time to upload we really appreciate it.

[@joestough664]

I have the 860 and it's a beast. Loads full buckets front and back fairly easily, even in hard ground. It runs like a top and has definitely earned it's keep.

[@evanespin2726]

Great video Gazza, I've forwarded this to a friend who has aquired an MF 760 and was unsure about some of the controls. Thanks again.

[@onlygazza]

Evan Espin glad to help 👍

[@danfield9466]

cheeres for uploading never seen a fermec digger before very interesting thumbs up from me to

[@mattysmetaldetectingsouthwales]

interesting video gazza, enjoyed it buddy ,funny thing is, i did exactly the same thing with ignition switch on a toyota corolla damm electrics ,lol anyway thumbs up from me :)

[@onlygazza]

Cheers for the comments fellas and also sorry about the hands being purple, I sprayed them with footrot solution the other day by accident and it won't come off 😂

[@AlecHoss]

Use one in upstate NY,USA good Machine.

[@onlygazza]

Maul Sams yes they are really good and very reliable machine, all the best gaz

[@TheMONTREYJACK1993]

Could you swap the pipes round on the back actor to driver on European controls pattern

[@onlygazza]

TheMONTREYJACK1993 I suppose you could but it’s pretty easy to master if you can drive a mini digger, I just jump between them without noticing.

[@TheMONTREYJACK1993]

Gazza i had a go of a 3cx once was one interesting experience haha 😂

[@mickwilliamson1114]

I have a 750 and it has the same ignition problem. can you tell me how you managed to fit the starter motor button. There is very little room. I am pulling my hair out trying to find a way to do it.

[@onlygazza]

On the top of the solenoid there is a positive 12 volt wire that key used to put power to the small solenoid, cut that and put a chocky block joiner there and put a positive to the switch you are going to install leaving the cut wires attached also. If you look on one of my jcb Fastrac vids I show you how to do it on there because my Fastrac has a similar problem 👍

[@henrybillington290]

I got one of them :)

[@mickwilliamson1114]

Gidday Gazza how do you remove the starter motor if the buckets down

[@onlygazza]

Get under her and struggle or get another machine to lift up the Bucket, no other options

[@conyt2758]

This machine is made before 2000,maybe 96,97

[@kyleblake9258]

Howzit Gazza tell me something where is the 4x4 switch and where underneath does the 4x4 solenoid sit cause I can't find it nowhere ?this surely can't constantly be locked in 4x4?

[@onlygazza]

It’s on the right of the steering wheel, a switch on the dash

[@kyleblake9258]

@@onlygazza thanks man ,all these buttons have been by passed ,Zimbo bush style .lol thanks came right

[@goyoub7549]

i have fermec 965 i found all wires of joystick cut and i want to change the joystick Can any joystick electrical work for me o i need a specific joystick if you have any ideas Thank you so much Sir.

[@onlygazza]

You will probably need a specific joystick for that model I’m afraid because you would make a hell of a mess rewiring a non standard joystick in my opinion. A stock fermented one would plug straight in and you’d be back running very quick !

[@goyoub7549]

@@onlygazza thank you for your reply can i install a new system to control the fermec? I'm thinking to change the joysticks and the motherboard.. is that possible? Thank you Sir.

[@onlygazza]

@@goyoub7549 sorry bud that’s above my pay grade, I can barely get up on time in the morning 😂✊

[@codyharris9472]

How did you fix the switch mine is the same way not starting up

[@onlygazza]

If you mean the starting I just put a button with two wires to the starter motor

[@codyharris9472]

@@onlygazza thanks I'll try that

[@onlygazza]

@@codyharris9472 you just need a positive to the switch then the other wire joined to the small positive wire on the starter solenoid ( if you look at a vid I did last month on the Fastrac it shows you how to do it on there )

[@aderlyhinostroza6357]

Someone from the group could help me with the manual of the mf 965 backhoe loader, the electrical and hydraulic diagrams.

[@aderlyhinostroza6357]

Hola amigo buen día.me podría habilitar el diagrama eléctrico y el hyd o podrían venderme.lo nesecito urgente

[@ryanmaginn9030]

I have an 860 it's 1990

[@onlygazza]

Ryan Maginn cool, good machines 👍