Ferroli bluehelix test mode and calibration

[@anszil8050]

Hi, may I ask you a question? I have divacondens ferroli f 24 in my rented apartment and it's making scratching noices like faulty pump but it seams that it is coming from gas unit. What could it be ? Sometimes it just stops and reappear again. I have 2 radiators and towel warmer and I wanted to make it more economical because now it takes 2.3 m3 of gas per 24 hours guite much for 38 squere meters what I can do.

[@meccip]

hello. Can you help me with some info about P42-Solar setting, P51-Solar stop temperature and P52-Solar start temperature ?? How to set P51 and P52 for ferroli to work when water input is higher than 35 degree ferroli heater not to start and when water input is lower than 35 degree the heater must start

[@MrBlekzz]

Please help: when I go to test mode it shows 00 and is not changing. After a while it goes to the same test set up as here. Is this ok? What 00 means?

[@felicepensato3683]

hello to me on the display it says 56 why does it do this?

[@arhimede88]

Hi,i have a question:Can you make a video explaining how to do a complete calibration for noise problems on bluehelix alpha boilers? I eork a lot with ferroli and i always need to calibrate them for that noise and i would really appreciate a video explaining stept by step how to do it!thx in advance🤝

[@theferroliman2067]

I can't do a video as there's alot of people who will follow it the wrong way and cause major problems. Send me an email and I'll explain more [e-mail]

[@maxmax4985]

Ferroli ditta italiana ,e non trovi un video sul.manuale d'uso in Italiano.........

[@theferroliman2067]

si spera che guardare alcuni dei video possa essere autoesplicativo per le basi di come funziona la caldaia

[@bobbrown1995]

Has it got a timer for the heating ??

[@theferroliman2067]

@@bobbrown1995 No it has wiring connections inside for an external clock . The majority of boilers now don't have built in clocks but external ones that you can choose yourself

[@السباكةالحرفين]

من فضلك أضف الترجمة باللغة العربية للفيديو شكرا لك على كل المعلومات

[@keagandanny7235]

i know I'm kind of randomly asking but do anybody know of a good site to stream newly released tv shows online?

[@tannermarley998]

@Keagan Danny try flixzone. You can find it by googling =)

[@jason23419]

I've A56 and it's definitely not the flue :(.

[@theferroliman2067]

You need to remove the front cover so it doesn't use the flue for the air Intake . If it fires up and works then fit the front cover and check the reading on the air intake ....needs to be 20.9 o2 any other reading will cause the A56 . After that it's the pcb .But if A56 appears still after pcb replaced then it's definitely the flue