FESTOOL- IS IT WORTH THE MONEY? WHAT IS IT?

LET'S TRY OUT THIS NEW DENIBBING TOOL FROM FESTOOL WILL IT WORK AS ADVERTISED?
LINK TO SHIRTS teespring.com/...
SUPPORT THE CHANNEL BY USING THIS LINK ANYTIME YOU NEED ANYTHING FROM LMR👇
LINK TO LMR HOMEPAGE latemodelres.t...
Send mail to: P.O. BOX 900 Ashford, AL 36312
You can order all your Amazon needs through this link while supporting the channel amzn.to/2KvzVEl
INSTAGRAM / brew2l
BREW2L MUSIC: Music For Gear Heads open.spotify.c....

[@constructdestruct360]

This tool looks awesome! I'm painting my car this week "in the garage" and know it's going to be full dust nibs. This tool will be a lifesaver!

[@jsstrawder]

Chris uses one at the shop a lot. Says they’re amazing. Flag is nice touch 👍🏻

[@kylebaker8020]

These work really well if the paint is fully cured for months. ... If you work in a production shop with a bake booth like i do i choose not to use these and just use a razor blade.

[@joshshepherd6548]

Can’t wait to see more cobra 🐍 videos 1993 would be bad ass what color 1993 cobra

[@sublime929]

Teal is the best!

[@TheUpliftingGuy]

Which is the better product: MP Paint Run Remover Blade or Mirka Shark Blade ?

[@tomkjr1]

Very cool tool! I had no idea this existed...thanks!

[@UFOGHOSTHUNTER]

Need a white fox shirt!!🦊

[@CombsTowerProductions]

I’d love to see that 93’ cobra on the channel

[@jeremysherman1979]

New to your videos here on KZbin love it .thank you for what you Share. Thank buddy .

[@drummerbash]

My grey fox shirt should be here next week. Will let ya know what I think when I get it. 🤘

[@StLMikie]

And the project Fox shirt is cool.

[@appalachianfoxbodysaaronau3257]

I want a Project Fox shirt that says “pro staff” on the back when I bring those parts to you. LOL

[@BREW2LFOXBODY]

I’ll have to hook you up!! Lol 👍

[@RegularGuyGarage]

B Cam Mafia!

[@joshoneal4104]

The shirt i ordered is awesome i have no problem with it.

[@BREW2LFOXBODY]

Awesome, glad to hear that 🤟

[@djh1121]

I wear my pinkish fox shirt all the time, I just say it’s from the 80”s early 90’s 😂 I’m holding out for a white logo maybe, I know Andrew would buy one too. 😁

[@BREW2LFOXBODY]

Looool, that’s one way to handle it 😂 thanks for the support! I have a white fox logo shirt posted up.. is it not showing up on the site?

[@djh1121]

BREW2L I haven’t looked but will and sure will grab it. Thanks keep up the good stuff.

[@hovermotion]

Nice demo of the strangest Festool item..

[@ryanpatrick3347]

Cool tool to have. I haven't ordered a shirt yet but been meaning to. I will soon and give you some feedback.

[@DangVuuu]

Where can I buy it? I have some trash in the paint

[@mikej5131]

That better be one pristine low mileage 93 Cobra if you're going to trade for your cobra. Or some money on top lol.

[@BREW2LFOXBODY]

I’d love to say my car is worth a small fortune, but being completely honest it’s probably only worth 18....

[@bryanroupe8646]

If you can find a prestine 93 it's going to be going for quite a bit more than a Cobra in my area anyways. You can find clean termi's here for as low as 10-12k. There's actually one near me for sale right now with pretty high miles for 9k but it's still a termy and it's a clean car.

[@sublime929]

That's a very realistic and sell-able price. I'd say it's worth a few grand more than that though.@@BREW2LFOXBODY

[@sublime929]

9K!?!?!?? Send the link lol @@bryanroupe8646

[@jdhog2363]

How about brew2L over the heart & big fox on the back or B cam mafia on the back. But make the letters on the front over the heart 1 to 2” & big design on the back. That would look killer

[@brucebell7623]

Yes Agree

[@W333dm4n]

Great tool saw a guy using it to fix a keyed car

[@feellnfroggy]

The guy I messaged you about on FB has a 95 Cobra with D code motor, in addition to all those other cars I told you about.

[@jcraig89]

Is that wizard's mystic cut you are using?

[@BREW2LFOXBODY]

Yes

[@jcraig89]

@@BREW2LFOXBODY I switched from 3m perfect it and have never looked back. Great stuff

[@Dmnxx]

If your going to sell the cobra, bring it back to stock if you can. Ull get more for it. The way it sits u can get like 18k but stock form 20 and up. She's a garage queen :( don't sell it. That thing In another 10 years would be worth more.

[@bcmfarmsllc8103]

A straight razor does the same thing.

[@charlesgreer7641]

Cool tool cant wait to see u use it on the notch. Btw I ordered the black face polished lip 10th anniversary wheels from lmr last nite. They will come in while I'm trucking this week cant wait to get home Friday and bolt them up. I know it said some older years and the 4 banger cars need spacers. The wheels mine has on now has spacers. Did u have to use spacers on yours? And if so did they come with the wheels? Also I understand I'm going to have to take off quad shock or flip it. What route did u take and my whole thing with this build is handling I'm dropping it and putting in subframe connectors and strut tower braces so if removing quad will hurt handling I dont want to do that. Far as I know its purpose is to stop wheel hop when spinning. If u know of a aftermarket quad that will clear 10 inch wheels let me know. Thanks bud ur the one source I know that knows what I dont on the foxes.

[@dangerousfreedom4965]

Post a link on where to get the rims you have.

[@BREW2LFOXBODY]

lmr.com/item/WTK-1007DAA/1987-93-Mustang-Anthracite-Anniversary-Wheel-And-Nitto-Tire-

[@bigdaug67g]

Way off the subject guys but I'm having trouble with my car on cold starts. It stalls unless I keep my foot on it. Also when I'm driving I hear a backfire in the intake...., feel it in the pedal too. I made a Mr. Fusion(worked like a boss) and discovered a few small vacuum leaks and a major one at the throttle body( bbk 70mm). The leak seemed to be coming from the spring or throttle blade shaft. Is this my problem,,is there a fix or shud i buy a new one. Great channel guys......tons of info!!

[@BREW2LFOXBODY]

Glad the Mr fusion worked for you. I’m pretty sure it’s not the throttle body causing your issues unless it’s a big leak. More than likely it’s a timing issue or ECT/ACT sensor that’s causing the cold starts

[@bigdaug67g]

@@BREW2LFOXBODY ok.....I'll replace those sensors and see what happens. Thanks for the quick response,

[@rodcognito002]

Razor blade way I've always done it.

[@clcampbell85]

Rodcognito 00 no u gotta buy this shiny thing for 78dollarz... its tungsten carbide bro!! what are u a peasant

[@StLMikie]

So a nib is the high spot in the runs and sags correct? The tool basically slices off ultra thin sections of paint or clear?

[@BREW2LFOXBODY]

Exactly

[@darrend7490]

Oh man, first 4 seconds and what do i see?.... Leaves on trees!!!! So Jealous! Ok, on to the rest of the video!!

[@bryanroupe8646]

Good luck on the 93 cobra. If you do snatch one up I would take it to my grave. What moisture filter do you use ? I picked up a kit with three HVLP guns 0.8, 1.3 & 1.7, but read pretty much nothing but bad reviews on the moisture filters. You never know who writes those reviews though.

[@litespeedautodetailing9797]

Where did you buy it?

[@brucebell7623]

Suggest maybe the fox head Logo/ small in front over left breast pocket area or a little higher, and on back graphic of b cam going diagonally across upper back to either side and b can mafia underneath it.

[@samkelvin8357]

Nice mustang 👍🏻

[@bobfalfa76]

Still waiting on the podcast, hope you find time for it. As far as the T-shirts go, I'll be honest, haven't heard good things about Tspring. Poor "souvenir" quality stuff, it's the reason why I haven't ordered one yet. Frankly I think you and your brand deserve better, just my 2¢.

[@BREW2LFOXBODY]

Thanks Bob, I might have to look into something different then.. 🤔

[@sammymendezjr1864]

A 1993 ford cobra would . Be nice .I have one for sell if your interested . Bad thing is you live so far .

[@SithBladez]

California?

[@douglasbrodock573]

Some kind of a link for the car?

[@sammymendezjr1864]

@@SithBladez texas

[@sammymendezjr1864]

@@douglasbrodock573 no link .

[@foxbodyradicalrag5411]

Keep the terminator, your gonna regret getting rid of it, and i do believe, the terminator will be worth way more then a 93 cobra, just buy a 93 gt and do a cobra clone,,

[@BREW2LFOXBODY]

I’m thinking about that actually...

[@foxbodyradicalrag5411]

Im a huge foxbody man, ive grown up with them like everyone of us that think they are one of the worlds fastest and prob the most respected cars ever built, but the 93 cobra in reality is a different badge, they only have value because they were the only fuel injected foxbody cobra, there was another cobra foxbody but they didnt have the 302 v8, why doesnt anyone chase them??? They are harder to find???? The terminators didnt lose a single dollar since they have been made, and they are going to double value in our lifetime!!

[@elmostong1865]

BadAss little tool

[@Fatbodybenny]

I got my shirt it's ok with me. Just need to have a 3xl size cause I'm fat 😂

[@MollHyman]

Young Jennifer Hernandez Jose Johnson Carol

[@QuickShiftPerformance.]

Don’t trade or sell the cobra 😂😂

[@BREW2LFOXBODY]

Zeb Weeks you know I’m itching 😂🤣

[@MorbidThrasher666]

Someone trade this man a 93 cobra for his termi,lol

[@bobfalfa76]

MORBID FOX MUSTANG No shit man, a fox body Cobra just suits him much better.

[@teslaandhumanity7383]

£62:00 Amazon UK 🇬🇧😳

[@thewoodshop69]

Anything Festool means $$$$$$$$$$$$$$$$$$$

[@jackripperchen4492]

When your tool has a higher value than your car.....

[@GearHead704]

First bruh. 😂😂

[@n2o302]

Here's a cobra for you. dallas.craigslist.org/sdf/cto/d/midlothian-1993-mustang-cobra-make/6841893933.html

[@Dmnxx]

2nd