How to Sand and Buff Clear Coat - 3M Sand & Polish System

  Рет қаралды 260,822

Carz Plus

Carz Plus

Күн бұрын

Пікірлер: 285
@jackbrad3117
@jackbrad3117 3 жыл бұрын
this is a fantastic video by someone who isn't flogging product and actually knows what they are doing
@CarzPlus
@CarzPlus 3 жыл бұрын
We really appreciate that. We believe it's important to give product information just to make the search on what to use easier. Thanks for your comment and for watching!
@agustinortega6467
@agustinortega6467 2 жыл бұрын
@@CarzPlus rrr
@RickIrvin-jk4yi
@RickIrvin-jk4yi Жыл бұрын
😅😮
@claytonford8388
@claytonford8388 3 жыл бұрын
I just finished the clearcoat on my Harley fairing. My first paintjob ever! So glad I found your video.
@CarzPlus
@CarzPlus 3 жыл бұрын
Glad I could help! Viewers like you are part of the reason for what we do. Thanks for watching!
@ejusdem_generis
@ejusdem_generis 17 күн бұрын
Your videographer did a top job! Thank you for this tutorial. I’ve watched so many and got sick of the differences. I couldn’t work out what sandpaper to use as they often had different recommendations. Soon as I saw the car you were working on I knew you’d have the right info, that’s a beautiful machine you have there. Thank you for explaining the best way to fix our clear coat mistakes.
@raymondlee7298
@raymondlee7298 Жыл бұрын
Really great tutorial. Lot of things I watched on KZbin is lack of details -- not this one.
@CarzPlus
@CarzPlus 11 ай бұрын
Wow! That's a fantastic compliment and we're happy to hear it. Thanks so much, and thanks for watching.
@richardbartlett4075
@richardbartlett4075 Жыл бұрын
Thank you! Now I can finally quit trying to find the answers you so gracefully explained - correctly. I restore motorcycles, work on customers motorcycles and I'm again building another race bike. Old 1976 Yamaha RD400 two-stroke and I'm way way older than it. LOL. I now feel confident to paint these bikes and it saves me a ton of money. Thank you again for the no-bullshit info!
@CarzPlus
@CarzPlus Жыл бұрын
Thank you so much for your comment. It's greatly appreciated and inspirational. Glad you enjoyed the video and it's especially good to her that you're on your way to finishing your bikes and saving money. Thanks for watching!
@CapeCodTrainTodd
@CapeCodTrainTodd 3 ай бұрын
Great job. I am at that stage with my repaint and the cutting buffing is intimidating but you make it look easy with great results. I was also quoted $10,000 for a basic job and up to $20,000 for show quality and with some work and time I'm at about $1400 now. My lil Cobra is looking pretty good with its home job and now to make it even better with your tips. Thanks.
@WildWestGarage
@WildWestGarage 3 жыл бұрын
Nice explanation on the steps required to make it shine. Pro tip, any parts like the tail light in this example should be removed before starting work if possible, that way you can easily sand up to and underneath where it mounts.
@CarzPlus
@CarzPlus 3 жыл бұрын
Good tip! Always helpful to share information with the restoration community. Thanks for watching!
@bateb76
@bateb76 19 күн бұрын
Thank you so much for this! So we'll done and edited. Helped me immensely when I had to fix my gas tank on motorcycle
@williamspencer76
@williamspencer76 Жыл бұрын
Thank you so much for this post. I cannot wait to put the elbow work into my paint job I did in the driveway. It's gonna be awesome and did not spend the 10k I was estimated
@CarzPlus
@CarzPlus Жыл бұрын
Happy to hear we've encouraged you to DIY. Thanks for watching!
@justinblaylock6421
@justinblaylock6421 3 жыл бұрын
Great video. Thank you. Just painted my car in my garage and time to do this next step!
@CarzPlus
@CarzPlus 3 жыл бұрын
Right on! Thanks for watching our video. Pleased to hear that you found it useful.
@brian8431
@brian8431 3 жыл бұрын
That was a great step by step tutorial I mean you went through everything. Thank you so much
@CarzPlus
@CarzPlus 3 жыл бұрын
You're very welcome! It's our pleasure to lend a hand with our videos. Glad you found it useful, thanks for watching!
@megadudsyable
@megadudsyable 2 жыл бұрын
Awesome step by step video. Very informative with great results. I'm up to this stage on my build so I'm definitely using this process.
@CarzPlus
@CarzPlus 2 жыл бұрын
Glad it was helpful! We're happy to hear that you've applied the information in this video to your project. Thanks for watching!
@danielgarza3683
@danielgarza3683 2 жыл бұрын
@@CarzPlus ll
@darrylweaver384
@darrylweaver384 Жыл бұрын
Best video I’ve seen so far, thank you Sir!
@CarzPlus
@CarzPlus Жыл бұрын
Wow, thanks! Glad you enjoyed it and found it useful. Thanks for watching!
@furst6
@furst6 Жыл бұрын
what an outstanding, comprehensive, non-product biased demo and explanation of these finishing steps. I'm a bike builder and have been experimenting spraying raw carbon frames with automotive finishes but with so many surface deviations, I can't avoid problems. this may be my answer
@CarzPlus
@CarzPlus Жыл бұрын
Thank you for taking the time to let us know that you enjoyed the video and found it useful. It means a great deal to us. We wish you the best of luck with your bike projects and hope that you'll have the chance to share your success story with the steps demonstrated in the video. Thanks for watching!
@RaisingAwesome
@RaisingAwesome 3 жыл бұрын
Thanks for sharing. I'm in the middle of a garage paint job now - busting through all the myths. I like that you endorse that you can just paint in your garage or even outside. Most definitely. I like painting in winter because there are no bugs or humidity concerns. I have a heater installed high on the wall, so I can easily get the surface temp to 70F. The HVLP guns produce no overspray like the high pressure guns I used as a kid. One thing I'm not bashful on is using an orbital sander to knock out the big flat areas of orange peal instead of by hand. It makes short work of it - although I respect what you are doing and see that it has a curve that could pose an easy burn through.
@CarzPlus
@CarzPlus 3 жыл бұрын
You're correct on so many counts and this information will be useful to our viewers. It's always good to wear the necessary gear and work in well ventilated areas, depending on the materials used. Thanks for writing and for watching our video.
@TheRebelyellers
@TheRebelyellers 2 жыл бұрын
Nailed it man! I took on my first garage paint job over winter as well. I used an HTE type gun and had damn near ZERO overspray and even without a draft system set up I had no more than 5 nibs throughout the whole car. Booths are great for production but my budget friendly 2 car garage set up produces great results.
@harleytrott2335
@harleytrott2335 6 ай бұрын
​@TheRebelyellers vevor sells inflatable kevlar paint booths for 700$ to $1200 depending on size. I own a small autobody shop and am trying to get one myself, as it looks more professional, but have found painting on a concrete floor with walls is about the same as im going to wetsand and buff it anyways. The thing about overspray, tho, is that its fine particals that build up over time. If you paint in there a few times, you'll find it builds up on fibrous materials, fan blades and vents. Not a huge problem. Just sharing my experience from industrial and automotive painting background.
@wildestcowboy2668
@wildestcowboy2668 3 жыл бұрын
Putting aside from some basic errors a professional will catch the car he has is very nice. Love the back window. Wish he was closer I'd help him get it straightened out.
@CarzPlus
@CarzPlus 3 жыл бұрын
The Graham Sharknose is catching on! Overjoyed to know that you like the car.
@m.w.c888
@m.w.c888 Жыл бұрын
Crazy good video. Best i could find!
@CarzPlus
@CarzPlus Жыл бұрын
Glad you liked it!
@johnprice1914
@johnprice1914 4 ай бұрын
Nicely demonstrated..thankyou!
@CarzPlus
@CarzPlus 3 ай бұрын
Thank you kindly and thanks for watching!
@davidatkinson2167
@davidatkinson2167 Ай бұрын
In the UK it is known as emery paper. Sand paper is for dry use only whereas emery, also known as wet and dry is used with water.
@CarzPlus
@CarzPlus 27 күн бұрын
Interesting. That name is used on another product here in the United States. An emery board is what's used during a manicure, which is basically "getting your fingernails 'done'."
@anonimous2451
@anonimous2451 23 күн бұрын
1 hour for a 2 x 2 ft area. Wow, that translates into HOURS and a few days of cut and buff. The sacrifices we make for PERFECTION... :D
@danielmackormack8524
@danielmackormack8524 4 ай бұрын
Loved the video , I started watching to give me ideas to fix my issue. I tried a one step swerl remover and scrached my hood worse. Could I use this system on a factory BMW paint job with swerl marks in the clear coat successfully? Thank you for all the information❤ ❤
@tommyp110
@tommyp110 2 жыл бұрын
I'm no pro painter I have painted a few. Cars and bikes. With I'm guessing perfect weather and right compressor. Cheap harbor freight paint gun.and oil water separator on the gun. Have had very good LUCK. Basecoat clear being the easiest I've worked with. With very little orange peel. Or runs.again luck. I have just painted a front clip on my 90 corvette. And I got lots of orange peel. Heat index here in Illinois 110. Ugh. I've tried the sand buff never worked for me. From watching 1000s videos. Never been able to get sand marks or shine back. But watching your step by step video,THAT MAKES MORE SINCE TO ME. I think I can do it now. We will see. THANK YOU..We'll update FAIL.. SANDED BACK DOWN WAITING ON FREEZE WARNING THEN RESPRAY
@CarzPlus
@CarzPlus 2 жыл бұрын
We've had similar issues. Sometimes you do have to sand it back down and start over. Like you, we don't do the entire car, rather in stages. A lot of what we do when restoring requires patience and desire. Appreciate the updates. Thanks for watching!
@laker09champ72
@laker09champ72 2 жыл бұрын
awesome tutorial! just got done painting my bumper and will use this method to cut and buff. Thanks!
@CarzPlus
@CarzPlus 2 жыл бұрын
Right on! Happy to hear that you enjoyed the video and found it helpful. Thanks for watching!
@joeycrema1898
@joeycrema1898 Жыл бұрын
Great explanation-Very very helpful
@CarzPlus
@CarzPlus Жыл бұрын
Glad it was helpful! Thanks for watching.
@logan8256
@logan8256 3 жыл бұрын
Love the vid. Just got my truck painted but it as some s severe orange peel. I’m afraid to fix it bc I won’t have much clear coat left.
@wildestcowboy2668
@wildestcowboy2668 3 жыл бұрын
Don't be afraid Logan. James Earl Ray wasn't. Just keep your surface wet, very wet
@CarzPlus
@CarzPlus 3 жыл бұрын
You can do it! Let us know how it turns out.
@kennyvanh
@kennyvanh 3 жыл бұрын
Very nice job, thank you, looks like hard, time consuming work that really pays off.
@CarzPlus
@CarzPlus 3 жыл бұрын
You bet, and we're happy to see that you appreciate our efforts. Thanks for watching!
@johnsn9519
@johnsn9519 3 жыл бұрын
Very informative. My main concern is polishing near the edges by the trim or smaller areas where the pad would not be able to fit like between the trunk lid and rear windshield glass.
@CarzPlus
@CarzPlus 3 жыл бұрын
You can hand polish with micro fiber towels, but it is very time consuming. However, if you look around on the web you can find a variety of specialized shaped small pads that help in small areas. You can also place masking tape on areas to protect them when sanding and polishing in close quarters. Appreciate your comment and thanks for watching!
@Hillbill0321
@Hillbill0321 Жыл бұрын
On amazon they sell smaller drill polishing foam pad attachments all the way down to 1/2 inch sizes . I have a .5 inch , 1 inch , 2 inch , 3 inch and 5 inch foam buffing /polishing pads all from amazon . That way you would be able to get into any spot anywhere ! 👍👍
@DVTOM
@DVTOM 3 жыл бұрын
I learned a lot! Great step by step!
@CarzPlus
@CarzPlus 3 жыл бұрын
Glad you enjoyed it! Thanks for watching!!
@SmokeyA55
@SmokeyA55 Жыл бұрын
Excellent tutorial 👍🏿💯
@CarzPlus
@CarzPlus Жыл бұрын
Thank you 🙌 Really appreciate that.
@georgebayley8093
@georgebayley8093 Жыл бұрын
Great explaining while you go along
@CarzPlus
@CarzPlus 11 ай бұрын
Thank you! That's a very nice comment and we appreciate it.
@tzajaczajac
@tzajaczajac 2 жыл бұрын
Thanks for the video I watched alot on KZbin this one was clear helpful and a great result, good job👏
@CarzPlus
@CarzPlus 2 жыл бұрын
Thanks for the applause! Glad it helped. We appreciate your thoughtful comments. Thanks for watching!
@Dustyfingers
@Dustyfingers 9 ай бұрын
I get those in Chicago winters as well. 38 degrees and still get dust and hair nibs. I think it’s static from sanding specially if you use a tack rag
@CarzPlus
@CarzPlus 9 ай бұрын
Interesting. Thanks for pointing that out and thanks for watching.
@anthonynotaro1604
@anthonynotaro1604 2 ай бұрын
Thank you I appreciate the work you put into that
@CarzPlus
@CarzPlus 27 күн бұрын
You are so very welcome. We're happy to hear that you enjoyed the video. Thanks for watching!
@patrickwarden2933
@patrickwarden2933 Жыл бұрын
great video and gorgeous car.....
@CarzPlus
@CarzPlus Жыл бұрын
Many thanks! Appreciate your comments. Thanks for watching!
@patrickharrand
@patrickharrand 3 жыл бұрын
Great video. Very informative. Thanks for sharing your skills with us.
@CarzPlus
@CarzPlus 3 жыл бұрын
Glad it was helpful! Thanks for watching.
@greggpaul8053
@greggpaul8053 3 жыл бұрын
Excellent video thanks for the tips!!
@CarzPlus
@CarzPlus 3 жыл бұрын
Glad it was helpful! We greatly appreciate your comment. Thanks for watching!
@jeffreywin584
@jeffreywin584 2 жыл бұрын
That was a great tutorial and I thank you.
@CarzPlus
@CarzPlus 2 жыл бұрын
You're very welcome! So good to hear. Thanks for watching!
@donshotrodgarage1717
@donshotrodgarage1717 Жыл бұрын
Outstanding Video Man
@CarzPlus
@CarzPlus Жыл бұрын
Glad you enjoyed it. Thanks for your comment and for watching.
@rick168148
@rick168148 3 жыл бұрын
very good video and professional!
@CarzPlus
@CarzPlus 3 жыл бұрын
Thank you very much! Your appreciation for this video means a lot to us. Thanks for watching!
@adambegley4266
@adambegley4266 3 жыл бұрын
did you sand the paint back before applying clear coat? I've done a test spray paint of some metal before tackling a big job and the paint has orange peel. Should I sand this, apply clear coats, then sand and polish?
@CarzPlus
@CarzPlus 3 жыл бұрын
If the basecoat is metallic, NEVER sand it at all. It will result, at best, in "tiger stripes." It's best to color sand the clear coat. If you must sand a non-metallic base coat you can, but I would suggest an overspray properly done before adding the clear coat.
@soulorocket
@soulorocket 2 жыл бұрын
Definitely a Great How To Video. Thanks for not trying to be a movie star and demonstration use of Five Dollar Words. One question I have is.....No Cut And Buff Videos get into HOW to do those Dangerous edges and corners where the paint is thin. Do you get rid of the Orange or just sort of knock it down a little with 3000 and hope for the best? Nobody demos the edges. Thanks for The Video!
@CarzPlus
@CarzPlus 2 жыл бұрын
Good question! Edges, due to the physics involved in applying spray paint, always have less paint on them. Rarely is it necessary to go right to the edge. It is also very very hard not to sand thru at the edges. This is why no one demos it as it is not a generally recommended procedure. Thanks for watching!
@cobar5342
@cobar5342 Жыл бұрын
Thank you for a very helpful video
@CarzPlus
@CarzPlus Жыл бұрын
Thank you so much for your positive comment, it's good to hear and we really appreciate it. Thanks for watching!
@jeffreyeiford2750
@jeffreyeiford2750 7 ай бұрын
Thanks so much for the video - I have a well he said he was a painter - interior of a house painter I feel . Any way it’s a white o3 F150 not a factory white ?? It has flat areas , couple of runs and not much shine . Your suggestion on trying to get a shine - thank you
@CarzPlus
@CarzPlus 7 ай бұрын
Yes, you're welcome. Since you didn't specify that it is a base clear paint job. it's hard to be 100% definitive. Given what you described, I would suggest locating a well reviewed detailer. He will be able to look at it in person and suggest what can be done. There are a wide variety of paints and certain products work best for certain types of paint. Generally, he will have to do some sort of compounding and polishing to improve the looks of the paint job. Hope all works well for you and thanks for watching!
@kevinkendall3122
@kevinkendall3122 Жыл бұрын
I like to use a spray water bottle when wet sanding,seems to work best for me
@CarzPlus
@CarzPlus Жыл бұрын
Great tip! Always appreciate it when viewers share ideas.
@keithsfastcars1133
@keithsfastcars1133 2 жыл бұрын
It is a long process, but necessary for a good result!
@CarzPlus
@CarzPlus 2 жыл бұрын
Thanks, we appreciate your comment! Good to hear that you found the video useful. Thanks for watching!
@BizOrNot
@BizOrNot 2 жыл бұрын
Great video! Thanks a bunch! I had small rust areas cut out, and new metal welded in, and 5 coats of single-stage urethane put down on my '62 Pontiac Grand Prix in cameo ivory urethane (just want a quality driver) by a local body guy. Came out pretty nice, but a lot of orange peel, and normal dust specs. I want to correct the paint myself, and am pretty handy but I noticed you had hand sanded with 1K, 1.5K,2K,3K, 5K until the imperfections once wiped dry were gone, and only then did you switch to the DA and compounds to bring the gloss back. Since my car is quite large I wondered if I could use a DA instead of all that hand sanding. My gut feel is I'd be better off to take the time to hand sand like you did to avoid over sanding, especially since the orange peel, dust, etc. is different on different areas and this is my maiden voyage. Appreciate any thoughts you might have. Thanks a bunch!
@CarzPlus
@CarzPlus 2 жыл бұрын
Thank you so much, and thanks for sharing your experience. We wouldn't recommend using a DA sander, especially if you haven't done it before. Thanks for watching!
@harleytrott2335
@harleytrott2335 6 ай бұрын
single stage paint also normally has some orange peel because of the thicker viscosity of the urethane based paint and the fact that you can't over reduce it to make it smoother without running the risk of a dull finish. There is an acceptable amount of orange peel for single stage that is normally considered a very slight fog to the edges of the shine, so dont beat yourself up if you find it hard to get single stage to look the same as buffed clear. .
@jeffreywin584
@jeffreywin584 2 жыл бұрын
Is a dual action polisher good for this work, 6 or 3 inch? Thank you.
@CarzPlus
@CarzPlus 2 жыл бұрын
Good question. Only if you can produce an rmp range of 1000 to 1500 rpm.
@jeffreywin584
@jeffreywin584 2 жыл бұрын
@@CarzPlus Thank you!
@reefhog
@reefhog Жыл бұрын
Most people doing paint correction nowadays only use a rotary for heavy cutting, and a DA for finishing. Many only use DAs.
@bjputvain
@bjputvain 7 ай бұрын
If I tape off top 1/2 of tailgate and sand pots on the bottom. I did three coats of color all over bottom 1/2. I have not yet don’t the 3 clear coats. My question is when do I untape the top 1/2 to cut the tape line down? Do I do the clear on the bottom and when untape top 1/2 and wet sand the old and new then buff it all? Do I untape the top and clear the whole thing? This don’t make scene but I figured I would ask. I’ve never painted before and just fixing rust on bottom of my truck tailgate but have no clue how to knock down that tape line or when to do it.
@CarzPlus
@CarzPlus 7 ай бұрын
Good question. It is best to clear coat it all and then proceed, unless you have a pin stripe or easy break in the metal to work to as a stopping point. Hope that's helpful and thanks for watching.
@3generboiler
@3generboiler Жыл бұрын
1000 2000 3000 5000 with water/dawn .. 3M perfected rubbing compound with air powered small polisher with compounding pad (with full size) purple pad. Black pad is finishing pad. 3M perfected Ex machine polish for finishing.
@CarzPlus
@CarzPlus Жыл бұрын
Thanks for the tips, we love it when our viewers share ideas. Thanks for watching!
@billlane7499
@billlane7499 Жыл бұрын
How would you fix clear code that is chipping around the top door Panel where the clear coat is chipping all it is a 2005 Toyota. Avalon? Can I do the same procedure to fix the vehicle
@CarzPlus
@CarzPlus Жыл бұрын
You'll have to restore the entire panel. Unfortunately a small repair as such will show. It's a very good process and can be used on virtually any vehicle. Thanks!!
@scr975
@scr975 Жыл бұрын
Thanks for the video It really helped a lot
@CarzPlus
@CarzPlus Жыл бұрын
Glad it helped. Thank you so much for commenting and thanks for watching.
@ExtremeRecluse
@ExtremeRecluse Жыл бұрын
if you have a buildup of residue would a hose with a spray nozzle, be beneficial for cleaning the residue frequently? The DA could have been used throughout the sanding process.
@CarzPlus
@CarzPlus Жыл бұрын
Yes, it can be done that way. Thanks for watching.
@dhalsim-1
@dhalsim-1 2 жыл бұрын
Hi there. Is it possible to get polishing pads that will fit to a normal drill? And if so, what RPM's would I set it to for the compound and then the polish? Thanks for any help 🙂
@CarzPlus
@CarzPlus 2 жыл бұрын
Try a Google or Amazon search for 1/4" drill Velcro mounts and polishing pads. Speeds in the 1,000 to 1,500 rpm range work well. Slower will still work, but it takes more time. Thanks for watching!
@dhalsim-1
@dhalsim-1 2 жыл бұрын
@@CarzPlus Thanks, I'll check them out
@thomasseliger2982
@thomasseliger2982 2 жыл бұрын
Dish soap lubricates the sandpaper not allowing it to cut and do its job.
@CarzPlus
@CarzPlus 2 жыл бұрын
By adding only a few drops, as we did in the video, the soap adds some lubrication, making the job more successful. Hope that adds some clarity for anyone viewing. Thanks for watching!
@Thumb_Coast_Aerial_fpv
@Thumb_Coast_Aerial_fpv Жыл бұрын
Great video, haven’t painted a car in years and just recently had to do a touch up. I would recommend adding links to your products you use in your description. You have a ton of views and could help you get free products and maybe compensation. I had one question, so last car I painted was 15 years ago. I wet sanded base before clear coating. Is that even necessary or should I just clear over the base coat and then do what you did here? Thanks again !
@CarzPlus
@CarzPlus Жыл бұрын
Thanks for the tip! Glad you enjoyed the video. It's not necessary to sand prior to clear coat with the systems I have used. However, their are definitely different instructions, depending on the brand of clear coat. Always refer to your brands recommended procedure when applying clearcoat.
@JohnPublic-t5l
@JohnPublic-t5l 9 ай бұрын
Good video but I do feel like you could have covered a little more on how to keep your paper clean to avoid scratching the surface as you sand it. My own preference is to not use a small pan li,e yours ti dip my paper in because it get a lot of debris in it that can cause scratching while sanding. Also, maybe touch on how it sounds when sanding as to hear if you have debris on the surface while sanding
@CarzPlus
@CarzPlus 7 ай бұрын
Thank you. The water was changed out periodically and was done off camera. Although, a larger pan couldn't hurt. This was filmed without a lapel mic, so the audio recording was done at a bit of a distance. David's voice projects well, so I was lucky to be able to pick it up. The added sanding sounds are a good idea for a future video. Thanks for watching!
@musicsam203
@musicsam203 Жыл бұрын
Great video! Do you think we can get away with sanding to 2,000? Or will 5,000 give even better results?
@CarzPlus
@CarzPlus Жыл бұрын
You can stop at 2000. However, you will have to polish longer. The best results are obtained going all the way.
@gezza50
@gezza50 3 жыл бұрын
for a large/flat surface (i.e. bonnet/hood) is it fine to use an orbital sander with those grit sandpapers? or will that strip it down too much
@CarzPlus
@CarzPlus 3 жыл бұрын
Good question! Wet sanding by hand is preferable as an orbital sander can be too fast as material removal. It will be too easy for most people to sand to much off. Thanks for watching.
@evh5150evh100
@evh5150evh100 3 жыл бұрын
Looks amazing thanks.
@CarzPlus
@CarzPlus 3 жыл бұрын
Glad you like it! Thanks for watching.
@zanaga1901
@zanaga1901 3 жыл бұрын
Will this work on metallic paint with 2,000 grit sandpaper and a da polisher.
@CarzPlus
@CarzPlus 3 жыл бұрын
Not unless you have a clear coat above it. If you do this directly on a metallic paint you will end up with swirls and or tiger stripes. Even after polishing, as some of the metallic particles will become damaged and their light reflection will change.
@thesetruths1404
@thesetruths1404 2 жыл бұрын
Nice. What wax, polish or sealant is good for new paint with a 1-part clear coat? I don't care about the looks, I simply want to wax it yearly for protection from salts and sun. For the past 10 years I only wash my cars twice a year. Spring and Summer. Seems to be good for the paint overall. The dirt creates a protective film! 😆 And doesn't wash away the wax/polish.
@CarzPlus
@CarzPlus 2 жыл бұрын
Good question. Only apply wax after a full 30 days from the time of painting basecoat clear coat systems. Use a quality paste was with real cannula wax as a component for the longest lasting protection. Thanks for watching.
@DennisLong-km4ty
@DennisLong-km4ty Жыл бұрын
Greatly enjoyed your video. Well explained and demonstrated. Would you mind sharing where you got the very soft pad you introduced at the 2:31 mark in your video? I'm in need of something like this to resume my sanding for my project. Thanks!
@DennisLong-km4ty
@DennisLong-km4ty Жыл бұрын
Ended up buying a 3M sponge pad from Summit Racing, in case anyone else is looking for a similar pad.
@CarzPlus
@CarzPlus Жыл бұрын
They are available on Amazon.
@GMPC
@GMPC 7 ай бұрын
So I did bottom 1/2 with paint. I’ll untape top 1/2 and clear the whole thing. But the clear that’s on the top do I need to scuff it up or sand or will the new clear stick to the old clear without doing anything. If I do need to scuff the old clear before adding new clear what grit should I use?
@CarzPlus
@CarzPlus 7 ай бұрын
Good question. I would use 320 normally unless the clear you are using specifies otherwise. Thanks for watching!
@damiandelapp5490
@damiandelapp5490 3 жыл бұрын
If i was a beginner i don’t think the best thing would be a die-grinder to learn with, I’d say start random orbital with a cut pad and a lot of pressure.. ill bet that little grinder can sling that compound a good 30ft.
@CarzPlus
@CarzPlus 3 жыл бұрын
The buffer in the video isn't a grinder. It is a variable speed buffer which runs between 1000 and 6000 rpm. I virtually never set it above 2000 rpm. If you are slinging compound everywhere you are using too much compound or too high an rpm. I never use a grinder for polishing. Thanks for watching.
@mrshawterry6
@mrshawterry6 Жыл бұрын
You're good sir, i did what you did, and the shine came out.
@CarzPlus
@CarzPlus 11 ай бұрын
Wow! Happy to hear that you had positive results. Thanks for trying the technique out and thanks for watching. We really appreciate it.
@daytonpyro
@daytonpyro 5 ай бұрын
is this machine polish the last step? or would a wax of some kind be even more of a fine finish? or can you end with the 3m machine polish?
@CarzPlus
@CarzPlus 4 ай бұрын
That's a good question. We prefer the system used in the video.
@bernie472
@bernie472 Жыл бұрын
Good video. Can you do this on a freshly paint plastic bumper that has orange peel? In other words, can you do the same procedure on a plastic bumper? (Bumper is not on the vehicle yet)
@annagraham6204
@annagraham6204 Жыл бұрын
That’s what I’d like to know as well. I’m in AZ and just painted my plastic front bumper cover off vehicle. Its a tricoat-base, mid, clear. Great coverage but definitely not as smooth as rest of car. I’d like to see if I can just polish it with compound without sanding but I’m sure that’s probably too easy and the answer is no:) Not sure how long I need to wait either. I finished 2 days ago.
@CarzPlus
@CarzPlus Жыл бұрын
Yes the process will work on modern plastic bumpers. However, you must take unto account the flexibility of the surface and not press overly hard if you may induce irregular sanding depths.
@paulcelentano737
@paulcelentano737 Жыл бұрын
Awesome video. Just one quick question. What type of paint were you starting with here? Urethane base coat clear? Lacquer base clear ?
@CarzPlus
@CarzPlus Жыл бұрын
Good question. Urethane base clear in this case. Thanks for watching.
@robinanddaniela8285
@robinanddaniela8285 3 жыл бұрын
Great video!
@CarzPlus
@CarzPlus 3 жыл бұрын
Thanks! Glad you enjoyed it and hope you'll put our tips to good use. Thanks for watching!
@sekaf4125
@sekaf4125 4 ай бұрын
great tutorial
@CarzPlus
@CarzPlus 3 ай бұрын
Thank you! Cheers! Thanks for watching.
@speed3000gt
@speed3000gt Жыл бұрын
Does this only work on cars that were painted with clear coat? (Versus cars painted by maaco with no clear coat)
@CarzPlus
@CarzPlus Жыл бұрын
You could, but it's a good idea to test in a small area first. Thanks for watching!
@miguelena40
@miguelena40 7 ай бұрын
can you get the same results if you do it by hand without the machine ?
@CarzPlus
@CarzPlus 7 ай бұрын
Good question. Yes, you can, but it will take longer by hand. You need to use a microfiber towel if you di it manually. Thanks for watching.
@miguelena40
@miguelena40 7 ай бұрын
@@CarzPlus thank you I am subscribe now
@kennymcquinkiss8292
@kennymcquinkiss8292 Жыл бұрын
Thanks for all the useful tips. L i k e d in subscribed
@CarzPlus
@CarzPlus Жыл бұрын
Thank you so much! We greatly appreciate it and thanks for watching.
@Jackintheshed
@Jackintheshed 9 ай бұрын
Great video
@CarzPlus
@CarzPlus 8 ай бұрын
Thanks! Glad you found it useful. Thanks for watching!!
@philgrazi
@philgrazi 2 ай бұрын
Looks great
@johnf6267
@johnf6267 2 жыл бұрын
Great job. Thanks!
@CarzPlus
@CarzPlus 2 жыл бұрын
Our pleasure! Thanks for watching.
@medicineman1202
@medicineman1202 3 жыл бұрын
Nice job mate
@CarzPlus
@CarzPlus 3 жыл бұрын
Thank you, we really appreciate that. Glad you liked the video.
@MB-zz3bg
@MB-zz3bg 3 жыл бұрын
It would be REALLY nice if you linked all the stuff you used.
@CarzPlus
@CarzPlus 3 жыл бұрын
Just finished watching the entire video and I found it was easiest to watch it with the CC turned on so that I could catch the specific name of the 3M polishing compounds used. Now, when it comes to the brand of tape pads and sandpaper and sanding blocks used, a majority of them are 3M. Anything that wasn't purchased locally, was purchased on Amazon. David here, has mentioned independent sellers who sell through Amazon and they kind of come and go, so links to those sellers can expire. The smaller pads that were used toward the end (which he considers one-use) are knock-offs of the 3M brand and can be found through Amazon or Harbor Freight.
@anthonydavid1965
@anthonydavid1965 2 жыл бұрын
A true craftsman👍
@CarzPlus
@CarzPlus 2 жыл бұрын
Thank you for posting such a nice comment and for taking a moment to do it. Thanks for watching!
@B_i_R_D__M_a_N
@B_i_R_D__M_a_N Жыл бұрын
what was the brand of sand paper again?
@CarzPlus
@CarzPlus Жыл бұрын
3M
@joshvjoshv
@joshvjoshv 2 жыл бұрын
I j painted my fender a month ago using base and then a 2k clear. It definitely has imperfections in the clear. Do I need to wait a certain amount of time for the clear coat to fully cure before doing this?
@CarzPlus
@CarzPlus 2 жыл бұрын
Sincere apologies for taking so long on this answer: Always wait at least 30 days for the paint to cure enough. If you hadn't touched it for a month since painting, you're in good shape. Thanks for watching!
@maxa4430
@maxa4430 7 ай бұрын
How long time for this job ‏‪??
@CarzPlus
@CarzPlus 6 ай бұрын
That's a good question. It's a tough one to calculate after all this time. It's a labor of love and restoring cars is one of those things, that for us, brings joy. Things don't always go right and sometimes those things have to be corrected, as you see here. The demonstration in this video was done, basically, in real time. 20 minutes to 30 minutes. Thanks for watching!
@jamesphelps3186
@jamesphelps3186 Жыл бұрын
Great video ... !
@CarzPlus
@CarzPlus Жыл бұрын
Oh, thank you so much! Good to hear that you enjoyed the video.
@robertthrem3382
@robertthrem3382 Жыл бұрын
That was two years ago nowadays we call them commie pads You should’ve painted it with the windows out so you could’ve sprayed inside the cracks instead you have it all over the black molding I don’t know what you were thinking but you’re doing a fine job polishing.
@CarzPlus
@CarzPlus Жыл бұрын
This is very much the same impression someone else had in a comment sometime ago. During the 1930s, cars fit and finish on an upper-middle-price range car are not the same as the high end cars of the era. They were better than the low end cars. The black "moldings" are the rubber gaskets that hold the rear windows in place. They are fit correctly, and they fit exactly on the patterned glass correctly. There is no paint on these rubber parts at all. The paint is on the metal only. I always paint under all the replacement rubber in advance. Hence the glass is out at that time.
@justinmacumber
@justinmacumber 2 жыл бұрын
Is Meguiar's Ultimate Compound the same as 3m perfected rubbing compound
@CarzPlus
@CarzPlus 2 жыл бұрын
No they not the same. Each is its own formulation. This is not to say they will both not perform well. I use what I showed in the video. Other products may well work in a similar manner.
@BeaterCollector
@BeaterCollector Жыл бұрын
Best to read the instructions on the wax bottles.
@CarzPlus
@CarzPlus 11 ай бұрын
Yes, always have a thorough understanding of the product's application and warnings.
@hrstanya
@hrstanya 3 ай бұрын
Thank you !! So many bs vids with junk products, and terrible instructions . Wish I saw this sooner, I would’ve saved so much time and $$
@zz3709
@zz3709 3 жыл бұрын
Awesome! (1) So orange peel on the base coat doesn't really matter?... As long as the top/outer surface of the clear coat is smooth/flat the paint job will look great? And (2) how long did it take you to do this whole car?
@CarzPlus
@CarzPlus 3 жыл бұрын
Yes, exactly. 2) It would take about 7 days 8-10 hours apiece to complete this process. Thanks for watching!
@zz3709
@zz3709 3 жыл бұрын
@@CarzPlus Thank you
@440gordy
@440gordy Жыл бұрын
I'm sorry but if your base is orange peeled or rough doesn't matter how flat your clear is the light will reflect off the base and it will always look like orange peel.
@scottshields8334
@scottshields8334 Жыл бұрын
No
@georgebrown678
@georgebrown678 3 жыл бұрын
He's killing me talking bout the Chinese pads. 😂😂🤣🤣🤣great job on the car too
@CarzPlus
@CarzPlus 3 жыл бұрын
Thanks for the nice comments. The smaller pads that were used toward the end (which we consider one-use) are knock-offs of the 3M brand and can be found through Amazon or Harbor Freight. Thanks for watching.
@flipper2473
@flipper2473 2 жыл бұрын
Hello, I need some help, I went sanded, primed, base coat, then clear coated all duplicolor product on a quarter panel. Paint color blended good except the surface is course and not silky smooth or shiny like adjacent areas. Is there a way to correct the job? Do I run the risk of making it worse,? Thanks
@CarzPlus
@CarzPlus 2 жыл бұрын
If you have a good coat of clear as described in the video you can use the process described to fix it. As to why one had the problem it is largely, but not always completely due to application technique. However, even new car manufacturers with their fancy paint facilities do not produce a finish that is perfect without additional hand work.
@flipper2473
@flipper2473 2 жыл бұрын
@@CarzPlus thanks
@flipper2473
@flipper2473 2 жыл бұрын
@@CarzPlus hello, after reading your suggestion, I compound and polished my not so shiny duplicolor clear coat and I did see much improvement. I still can see a difference between the factory finish and my work. I wonder if I scuffed my work, and apply 2 k clear coat to my repair work, would I be creating a mismatch to the 2017 factory finish (very good condition)? Thanks
@flipper2473
@flipper2473 2 жыл бұрын
Mean to say not much improvement
@CarzPlus
@CarzPlus 2 жыл бұрын
When trying to match the finish of a modern base coat clear coat system you should use a modern clear coat catalyzed paint. Lacquer is great for a whole car or project when you are not directly comparing it side by side with modern clear coat. The car in this video is not done in lacquer. We have videos covering both on the channel .kzbin.info/www/bejne/b6PalKiimbuBkLM
@james66872
@james66872 2 жыл бұрын
Very nice. Thank you sir.
@CarzPlus
@CarzPlus 2 жыл бұрын
Most welcome. We're always grateful to see someone step out of the way to give us a compliment on our videos. Thanks for watching!
@mattc9875
@mattc9875 4 ай бұрын
I would have covered the chrome trims as scratching then would be a pity
@CarzPlus
@CarzPlus 4 ай бұрын
No scratches here. We covered only what was necessary for the demo. Yes, we do need to protect the hard work that has already been done.
@Robert5185
@Robert5185 2 жыл бұрын
After 2000 you can jump to fine rubbing compounds then polish.
@CarzPlus
@CarzPlus 2 жыл бұрын
Great idea. Love it. Assuming that it has worked for you, we're thankful to you for sharing the information with our viewers. Thanks for watching!
@HPAcustomriflesandcerakote
@HPAcustomriflesandcerakote Жыл бұрын
Im not big on 3M Perfect It compounds and polishes i find them to be over rated. When it comes to compound and polish 3D and Sonax rule that industry. However I do like 3M sand paper especially the purple cubitron ll
@CarzPlus
@CarzPlus Жыл бұрын
Thanks for writing. Some of our viewers may give it Sonax a shot. 3M has been my preference for a long time.
@HPAcustomriflesandcerakote
@HPAcustomriflesandcerakote Жыл бұрын
@Carz Plus 3m as a company has just really gone down hil. I do like their cubitron ll sandpaper. Their claybars have basically gone to hell in a hand basket which are now made in Brazil go figure. I would give 3D a try you got nothing to loose. Saving yourself money by just needing 2 steps with 500 then 520. I like sonax but it doesn't have the working time 3D does. Technology is changing with ceramic abrasives like 3D uses and gets you done quicker with an even better result
@ericwerick239
@ericwerick239 6 ай бұрын
Excelente
@CarzPlus
@CarzPlus 6 ай бұрын
Your comment is greatly appreciated. Thanks for watching!
@billslinger7743
@billslinger7743 Жыл бұрын
Exactly how I feel about doing it myself….you can say I did it
@CarzPlus
@CarzPlus Жыл бұрын
Thanks for watching. Glad to hear you found the video useful.
@edwinbarahona4486
@edwinbarahona4486 9 ай бұрын
Thanks.good information
@CarzPlus
@CarzPlus 8 ай бұрын
So kind of you to say. Good to hear that you found the video useful. Thanks for watching!
@Nothingpopular.
@Nothingpopular. 8 ай бұрын
They also make 8000 sand paper which is great!
@CarzPlus
@CarzPlus 8 ай бұрын
Good to know. Thanks for watching, hope you found the video useful.
@Nothingpopular.
@Nothingpopular. 8 ай бұрын
@@CarzPlus yes sir, I buff for a living at an autobody shop in Alabama.
@zackk695
@zackk695 Жыл бұрын
Why did you clear over primer?
@CarzPlus
@CarzPlus Жыл бұрын
There is no clear over primer. The color in the video is the original color for this 1939 Graham Combination Coupe. The color is called Airliner Gray. It was the great depression and colors on most 1930's cars are far more subdued than in later decades.
@MScott-y4g
@MScott-y4g 9 ай бұрын
Knock your eyes out i didn't even know there was 3000 grit a little lone 5000. Thanks for this video, wish I could have seen this video 20 yrs ago I would still have hair!!!!!!!!
@CarzPlus
@CarzPlus 9 ай бұрын
Glad we could help! Better late than never as they say. Sand away to your heart's content. Thanks for watching.
How to: Wet Sand + Polish Clear Coat Paint - Part 2
24:02
6th Gear Garage
Рет қаралды 461 М.
How to Cut and Buff a New Paint Job
20:43
CoreysCave
Рет қаралды 248 М.
Turn Off the Vacum And Sit Back and Laugh 🤣
00:34
SKITSFUL
Рет қаралды 6 МЛН
Ice Cream or Surprise Trip Around the World?
00:31
Hungry FAM
Рет қаралды 22 МЛН
How many people are in the changing room? #devil #lilith #funny #shorts
00:39
Best Car Polishing Tips: How To Wet Sand and Polish BMW 535i
14:35
AMMO NYC STUDIO
Рет қаралды 64 М.
Wet sand and Buff a Car
14:16
Paint Society
Рет қаралды 91 М.
A Guide To Wet Sanding, Compounding & Polishing Car Paint!
21:31
Car Craft Auto Detailing
Рет қаралды 352 М.
Remove Orange Peel / Dry sanding / Piano Black Color / KOVAX paper
8:10
When to Polish vs Compound vs Wetsand
19:08
AMMO NYC
Рет қаралды 4,6 МЛН
Beginners guide to wet sand and buff your paint like glass!
8:13
Garage Noise
Рет қаралды 298 М.
How to Wet Sand Orange Peel in Car Paint: Porsche 911
12:50
AMMO NYC
Рет қаралды 713 М.
How to Fix Orange Peel and Nibs | Cut & Buff like a Pro
25:39
U-Wrench TV
Рет қаралды 465 М.
Hand Finish Sanding the Final Coat of Primer for Perfect Car Panels
16:16
Lakeside Autobody
Рет қаралды 48 М.
How To Get Rid of Orange Peel Without Sanding
11:01
Kandy Man
Рет қаралды 332 М.