I love my KS60 Ive been a kitchen fitter for 30 years 10 years all festool all except chop saw a delta sidekick. Until now haven"t found anything worth changing for. Looked at Kapex 120 when it first came out but to heavy and way to expensive.This has been a game changer for me and for the type of work I do. Just find the right tool that works for you.
@SkillBuilder6 жыл бұрын
Hi everyone. If you have a few minutes on a dull day take a look at our new Ask Skill Builder feature on skill-builder.uk kzbin.info/www/bejne/fJPOgqp4bsukjqc We want your questions and comments to help us make this a huge success.
@sortandtorque3367 жыл бұрын
Really enjoyed this video - clear and precise - cannot stress more upgrading the hose to 36mm for better dust control. The LED spot light is super accurate espesh when that blade is running. Its a quality build hence the price point.
@josoapification6 жыл бұрын
Bought this saw last year No complaints very good saw Well worth the money
@judithrob15913 жыл бұрын
Very important if you would like to saw with precision. (avoid torsion as much as possible)! Always choose a Miter saw with a handle positioned in a vertical line above the saw blade. Everything must be aligned, slide rails, handle, and saw blade, it is much better this way the blade will not tilt. Because there is some torsion in the aluminum housing . And choose an engine with softstart on it to prevent wear of the gear and worm shaft. It is very important that everything is aligned. Here are some examples to show how the handle must be positioned above the blade. Bosch gcm 800 sj / Bosch gcm 8 sjl / Evolution rage 3 / FESTOOL KS 60 / HITACHI C12RSH2 / FESTOOL KS 60 E KAPEX / Metabo KGSV 72 Xact . (This also is the case with the Miter saw without the slide rails). If you want you can test it yourself at home if there is torsion in the aluminum housing. Step-1. First you make a saw cut from +-5 mm deep in to a flat piece of wood. To this with the normal handle positioned on the right side of the Miter saw. Step-2. Then repeat this by pushing the saw blade down with your hand (finger) on the aluminum protective cover were the saw blade is cased in. Just now only do this without the running engine. Step-3. Now you can see if the saw blade will be positioned in or next to the saw cut. If the saw blade is (+- 0,2 / 0,5 mm) next to the saw cut then there is torsion in the aluminum housing. Step-4. therefor it is much better to choose a Miter saw with the handle positioned vertical in line above the saw blade. Conclusion: how further away the handle is from the saw blade how more chance of torsion in the aluminum housing.
@zedman4427 жыл бұрын
What a lovely bit of kit, some nice features.
@u2kjib4cjkqn7 жыл бұрын
Best chop saw in the world,have one not disappointed
@emanuelecrociani88843 жыл бұрын
Thanks a lot for this very detailed demonstration. I have only one question: the knob in front of the machine is not supported by this stand. Is that a problem for machine frame bending or not?
@shootinblanks0073 жыл бұрын
Great vid! I’m wondering why not available in USA??
@robthesamplist7 жыл бұрын
Looks good, probably miles better than my rage that induces rage when trying to do kitchen cornice work.
@SkillBuilder7 жыл бұрын
Yes Rob the Rage is at the other end of the spectrum. It needs setting up and keeping in line.
@robthesamplist7 жыл бұрын
They are great for cutting firewood with nails in (the universal blade it comes with) but anything like cornice or even skirting the rage struggle with, even with a high number toothed wood only blade (with adaptor ring as rage make stupid size blades to make you buy theirs) it still needs setting up every time you use it and then its hit and miss weather you get the clean cut Phil showed on this vid. I will def pay more next time I buy. Luckily I only do 1 or two kitchens a year. BTW I struggle when mitre bonding the two joints together its hit and miss when I put them together, wondered if you had a technique that works without fail.
@cuebj3 жыл бұрын
Evolution usually fine for rough work eg planters, timber framing, etc. Some very batches - I've had to return them as dead on arrival. Not for fine work
@jeffbradley87833 жыл бұрын
It is a beautiful tool
@pearlsrx4 жыл бұрын
I wouldn’t be doing heavy jobs with this if you do a lot of bevel cuts. Depth of cut dramatically decreases when cutting a right hand bevel due to the rails. That’s why you have to remove the fence and the permanent fence is so short. I think they’ve carefully disguised this problem in their video. Having said that I own a kapex 60 and only use it for finishing work where materials rarely exceed 35mm and I dare say based on the the amount of saws I’ve owned in the past 20 years that you’ll struggle to find one that is more accurate than this. It rides in the passenger seat of my van when I take it to work.
@nippychippy7 жыл бұрын
Great vid roger and phil 👍🏻
@pierreolsson5883 жыл бұрын
Why 64 thumbs down?! The video is top notch as is the saw…
@SkillBuilder3 жыл бұрын
Haters gotta hate! that is all there is to it.
@myharley56167 жыл бұрын
someone took the shadow alignment cut line from DeWalt. lol
@mezzygohil7 жыл бұрын
Nice one Roger. #festoolfriday
@edadpops17096 жыл бұрын
The fast action clamp on the old kapex is far better than threaded clamps.
@BischBaschBosch6 жыл бұрын
So gone is the ability to use the cool quick clamp you can use with the KS88 and the KS120 and also the brilliant graduated bevel control on one of the rails of the bigger saws? Why on earth leave that out? Add to that the 60's really poor depth of cut on a bevel, I can't see the point. It's more portable I suppose but it seems very unlike Festool to cut features. Being sold for between 650 - 850GBP here in the UK. Too much for what it is. Work and save an extra month and get the 88 or 120.
@bighands696 жыл бұрын
It is a super accurate small saw that many people use. If your own concern is depth of cut then go for a ks120 or another brand.
@MONKEYWASH4 жыл бұрын
When you used the angle finder you measured for an internal miter then cut an external miter? How would you use that device to measure an external miter?
@MrExercist4 жыл бұрын
it is also possible with the tool.. just slide out the side panels and measure an external
@WelshRabbit3 жыл бұрын
Like some of the other comment posters here, I, too, wonder why this nice compact version was never made available in the USA with a 110 volt motor.
@joe2mercs7 жыл бұрын
I think we are agreed that having a good fence to work against is useful for guiding the workpiece to get accurate cuts. It is a great pity therefore that the fence has to be removed for doing bevel cuts. While those 'overhead' slide rails reduce the amount of space needed at the back of the tool they interfere with the fence for bevel cutting. Also if after going to all that trouble to reduce the space needed at the back of the tool why do Festool then position the dust extractor pipe in such a way as to use up space at the back?
@bighands696 жыл бұрын
If you want maximum angles you will need to move the fence it is only an 8.5 inch saw.
@piee6832 жыл бұрын
There's a cordless one coming feb 22
@judithrob15914 жыл бұрын
Very important always buy a Slide Compound Mitre Saw with the handle in a line above the saw blade,everything has to be in line Slide bar rails,handle,and saw blade. it's better no tilt saw blade, and engine with softstart just like this video.
@B15SDMDESIGNS2 жыл бұрын
Why do the motors on the Festool sound so...rickety?
@BillyMustang1016 жыл бұрын
I think this is the perfect saw for the carpenter. All studwork and roofing is done with a circular saw so this is just for trims and mouldings during the 2nd fix. You don't need a bigger depth of cut. I would buy this to replace my monster Bosch without hesitation
@bighands696 жыл бұрын
+Martin Durrant It depends on the cuts you are making when doing roofing. Simple straight forward pitch cuts could be done with a hand saw. But if you are doing complex compound cuts that require accuracy then a festool may be what you need.
@BillyMustang1016 жыл бұрын
bighands69 Disagree. You only need a circular saw to cut compound angles accurately. It's too slow using a mitre saw when roofing
@jeffwaite74137 жыл бұрын
Is there a way to angle the dust port to the left or right? Straight out the back kind of takes away from the ability to get close to the wall. Thank you
@SkillBuilder7 жыл бұрын
+Jeff I was thinking the same thing. It could do with an elbow connector so it hangs down
@christianpetersen17824 жыл бұрын
Skill Builder or up!
@eunyoungchae2621 Жыл бұрын
Accuracy and price
@pgtips42405 жыл бұрын
Only £425432 including delivery, hose not included.
@drs-Rigo-Reus5 жыл бұрын
how would it do with an added laser, which are available on the market?
@gmusiclarsen11634 жыл бұрын
That room has 1.5 million dollars worth of festools.
@drs-Rigo-Reus5 жыл бұрын
I LOVE his shirt, is it available commercially?
@jamesfurlong76443 жыл бұрын
What about metals like sum of the other makes
7 жыл бұрын
I don't even see someone make this tool overview in Germany... u r the first I see some awesome details of this saw... awesome! :) u think the good less dust design is compareble with the big brother? I hope I can buy this one in the future :)
@SkillBuilder7 жыл бұрын
I think we got a scoop on this tool and we hope it will get lots of views across the world. I am impressed with the dust extraction but I have learned it is better to let the blade stop before you lift it up, That way the dust is not lifted out onto the top of the timber.
7 жыл бұрын
Skill Builder yes and the cut can be more clean thanks for your engagement :)
@jaytaijah1267 жыл бұрын
Kühn hn1
@rafaelheczey26486 жыл бұрын
First cut, 3:33
@malcolmpritchard48827 жыл бұрын
Looks great going to look into one of them just one question Roger does that angle finder do external profile because l thought he did an internal angle finder then did a external mitre perhaps l need to watch it back regards Mal 👍
@redstihl90277 жыл бұрын
Malcolm Pritchard you can slide out the bevels to measure external angles. 😊
@SkillBuilder7 жыл бұрын
Yes that is one I didn't think of but there is something on the machine itself.
@malcolmpritchard48827 жыл бұрын
redstihl -thanks for info 👍
@simoncroker25774 жыл бұрын
can you make it a keyed start system so only i can use it , wankers be abusing a chopper as soon as you walk out the room
@MrJFoster19845 жыл бұрын
Trend made an angle finder donkeys years ago that worked like this on the saw
@SkillBuilder7 жыл бұрын
what major feature did Phil not mention?
@redstihl90277 жыл бұрын
Skill Builder what application they intended it for?
@redstihl90277 жыл бұрын
The price? Or the tools under the blankets? 😜😂😂
@SkillBuilder7 жыл бұрын
Nope it is a feature in the machine
@redstihl90277 жыл бұрын
Skill Builder trenching?
@SkillBuilder7 жыл бұрын
Nope it is a green button
@Flores8287 жыл бұрын
the fence is real small i dont like that
@offcuts41464 жыл бұрын
Ive had this saw about 6 months now and still find the trigger a bit harder to use compared to other saws
@timli72583 жыл бұрын
Does this saw plug into mains?
@offcuts41463 жыл бұрын
@@timli7258 my one is a 240v so standard uk plug but you can also buy it as 110v which then needs a transformer
@timli72583 жыл бұрын
Does this saw plug into mains?
@SkillBuilder3 жыл бұрын
yes
@tonepalma7 жыл бұрын
What's the difference between the kapex 60 and the 120?
@SkillBuilder7 жыл бұрын
The blade size. The 120 is a 12inch saw and this one is 10inch, which means it has slightly less cutting capacity but it smaller and lighter.
@carpenter337 жыл бұрын
Skill Builder I have a kapex 120 the blade size is 10-1/4.
@BischBaschBosch6 жыл бұрын
Skill Builder has it wrong here. The KS120 has a 10 1/4" (260mm) blade, the KS60 has an 8" (216mm) blade. The 120 and 60 numbers refer to max depth of cut at the fence behind the arbor (for crowns etc). The KS 60 doesn't have upfront controls of the KS 120, nor the ability to control bevel angle in graduation via a knob at the end of a rail (a great feature). You also can't use the KL-KS quick clamp with the KS 60 saw. The KS 60 is a waste of money.
@MRMANTLE4275 жыл бұрын
It’s so cheap I want 10
@mhmorlock51867 жыл бұрын
Nice saw any talk about bring to north america
@SkillBuilder7 жыл бұрын
It should be there. As I understand it they had a global launch.
@bighands696 жыл бұрын
Americans are spoiled for choice. There are many great cheap high quality saws on the American market that Europeans would love to own.
@geligapictures7 жыл бұрын
hi, i new to mitre saw, can this cut metal?
@SkillBuilder7 жыл бұрын
with the right blade I would say it is good for aluminium but not heavy section steel.
@geligapictures7 жыл бұрын
Skill Builder thanks for the heads up
@weedylock7 жыл бұрын
You dont want to scratch such fine instrument with metal crap on it ;)
@barryinn17782 жыл бұрын
Ok 2 issues I don't like about this saw. I don't like the shadow line, not as accurate as the red lazor line. #2 I do not like the star handle you have to rotate on the rear of the saw to tilt the head to make compound cuts, I hate those on saws. The Kapex 120 is great for the way its rear top locking device works. Also this guy doesn't know how to make a good cut, when making a splinter free cut on top of your piece of wood, start the cutting of wood with blade all the way back against the fence and score the top of wood slide forward to front of the wood edge but do not cut the wood all the way through , just score it with the blade about a 1/16" deep to the front then go down thru the wood and then go back to the fence cutting the wood piece. This makes a clean cut without splintered edge, at least on the top of wood. And a clean cut underneath also. This process is for wide boards or plywood, if your cutting a 2 inch wide board you don't need to do this most of the time. I would not buy this saw for these 2 reasons.
@SkillBuilder2 жыл бұрын
The shadow can't be less accurate. It is the blade so how can it be wrong? I think Phil knows how to cut a piece of timber.
@michaelmancini57734 жыл бұрын
I can not reconcile spending hundreds of dollars more on Festool power tools, my partner has the Festool Kapex and Festool track saw, I have the Bosch Glide mitre saw and makita track saw, there is literally no difference in the quality of cuts on either tool between my Bosch and makita, and his Festool mitre and track saws, except my saws combined cost over $ 800.00 less, by the way, the handle on the Kapex mitre saw is ergonomically awkward and counter intuitive to use.
@pgtips42405 жыл бұрын
That angle finder? Have you never heard of a bevel? Theres nothing special about the angle finder, in fact a bevel is more versatile because they slide varying the length.
@kickpublishing6 жыл бұрын
Seriously, save a bit more and bet the KS120 - its a much more versatile tool, you wont regret it.
@wallacelux5 жыл бұрын
aint it too heavy though ?? and big..?
@R.H.Electrical7 жыл бұрын
I think festool is overpriced for what they are but alot of people love them
@SkillBuilder7 жыл бұрын
Ryan You may be right but they are one of the few who manufactures in Germany and that costs more. If you took China out of the equation you would have a different price structure. We have got use to slave labour.
@R.H.Electrical7 жыл бұрын
Indeed you are completely right. I think their plunge saw is great but I don't rate their drills I personally think Hilti are the front runners in drills and impacts :)
@SkillBuilder7 жыл бұрын
Ryan Agree with you about the drills. I was dissapointed
@R.H.Electrical7 жыл бұрын
Yeah especially for the price
@jameswolfe47127 жыл бұрын
Skill Builder in my opinion it depends on the application I own Hilti 18 volt impact Hilti 18 volt drill Festool t 15 Festool pdc 18 volt Power wise hilti is hard to beat. Unbelievable power and there impact just feels perfect in your hands. Although I've mentioned hilt is power is unbelievable, I believe the pdc is not far behind. The settings is where things get tricky. Festool is all about precision. If you torque the festool down to 1 then up the other two settings all the way to max position. The festool will rip your arm off. But the speed will be slow. Battery wise, there's no comparison. I have to charge my hiltis 2 or 3 times to one charge of my festool. In my opinion if I had to pick between all of them I'll pick my little impact hilti. Maybe if festool came out with a strictly impact drill. I might would change my mind. Because personally I use an impact over a drill anyday.
@jcurran24146 жыл бұрын
Your Saw bench is at least 200mm too low. But, then again, if you work at this height , the stupid and awkward Handle on this Saw would be unusable.
@jameswilliams59824 жыл бұрын
Shame about the 60mm
@pault19647 жыл бұрын
How deep can it cut at 45
@DavidStanton7 жыл бұрын
40mm to the left and 20mm to the right
@lege64457 жыл бұрын
That's so limited. How pointless
@DavidStanton7 жыл бұрын
le ge, it is a 8.5 inch saw designed for trim work.
@lege64457 жыл бұрын
States on Festool website it's designed specifically for trim and Base boards (skirting boards). I never fit skirting on an of my developments that Is 60mm. A tool that can only perform half the tasks in which is is designed for is not fit for purpose. Your quick to point out the good aspects of Festool but never the bad aspects. "Barry the plug" I think I what you call it. You irritate me giving me one sided biased salesman 'reviews' try being honest and you may garner more respect. (BTW I'm not a Festool hater I actually own a 120 which I love and feel Is market leader but again not without its flaws which again you fail to point out)
@DavidStanton7 жыл бұрын
You obviously haven't seen the second part to the walk through. Also, the cut capacity behind the blade is more than 60mm, quite a bit as a matter of fact.
@wmurphy19796 жыл бұрын
I have ks120 and a metabo kgs315 the metabo beats it by far
@wallacelux5 жыл бұрын
does it , how ?
@harryedwards93916 жыл бұрын
Bet this Guy was a very sloppy kisser
@toolman1014766 жыл бұрын
Another mitersaw that cant cut 5 1/4 baseboard......
@BillyMustang1016 жыл бұрын
toolman101476 did you really just say that 😂
@condor56356 жыл бұрын
$800-$1,000 more than a comparable Bosch. I have a 12 inch Bosch which I absolutely love especially with the Bosch miter stand. There is no way this saw is worth 2 of those. Go check the reviews. Waste of money. To each his own....
@mikepayen94417 жыл бұрын
Why would anyone choose this over a KS 120. You could bet your btm dollar that the first job would be cutting stock greater than 60 mm. And using a festool clamp is slow and cumbersome. Abt the only advantage I can see is the 60 degree cut both ways
@SkillBuilder7 жыл бұрын
I have a DeWalt 10 inch double bevel mitre saw and it does nearly everything I want and is a bit easier to transport. This size of saw is very popular so any manufacturer that ignores the sector loses sales.
@BrainFizz7 жыл бұрын
I hardly ever cut more than 60mm. I wanted a good saw for flooring and mouldings. Working in a clients house, i want the best dust extraction I can get. But i don't want to carry a huge heavy saw about. That's why people chose the KS 60 over the 120 or 88
@aleksanderrihtar40976 жыл бұрын
I think bosch and Metabo are better
@louiesworkshop20235 жыл бұрын
You are entitled to your opinion however after working with both Bosch and Metabo and now owning a Kapex 60 I would have to say your comment is at best wrong and at worst foolish, the Kapex60 offers levels of accuracy, cut and refinement far beyond these two brands, good saws they are but with the Kapex60 the word great is simply the only description suitable!
@MRMANTLE4275 жыл бұрын
I had all Bosch tools, I traded them all in because they couldn’t hold to my work environment
@louiesworkshop20235 жыл бұрын
@adie chip I agree with much of what you are saying, there is many good mitre saws out there for a good deal less and will do a good job, my work as a cabinet maker requires more than a good cut, or a good job my work requires an above average cut, and above average accuracy, this is where the kapex steps in, I have had hands on experience with makita and dewalt and Bosch and ok they where, yet simply no more than ok, the kapex first cut is the same as it's one hundredth cut spot on clean, crisp and perfect, I am not rubbishing these other brands as I think you seem to think, but as a cabinet builder I need better than most, festool offers me just that, do I think that festool is over priced, yes I do does it sit well with me.....no, i dont like it so it's up to other companies to spend a little more time in the design stage to catch up and match festool at a lower price, so then i wish you well. Kindest regards louie Ulster workshop
@louiesworkshop20235 жыл бұрын
@adie chip Adie, why so angry? I wouldn't dare question your skills in your field of joinery, machining kitchens requires a high level of both ability and skill, my work however is bespoke pieces that require often a mind blowing level of ability, something that I have had to work at for almost 30years, I am 47 and I started carpentry in my teens so you could say a long time. Over those years I have had many brands of saw and all I can do is tell of my own experiences, Bosch and Makita, DeWalt and Metabo have all offered a very acceptable level of cut, however when Festool approached us with their Kapex I have to say that the accuracy and repeated cuts simply went far beyond what I was used to before! We use 60 and 96 tooth Freud ProCut blades in our cabinet saws, Mitre Saws and also within our Festool55's, Cabinet making is a discipline that demands the very best of everything, so I wish you well in your kitchen cabinet work kindest regards Louie
@louiesworkshop20235 жыл бұрын
@adie chip Adie you do come across as alittle angry and upset! Often when I mention my festool machines some woodworkers become jealous and hit out with aggression!! Not saying that's you but you do come across as upset about something, I do have a woodworking KZbin channel which I have only begun, I intend to showcase some of my work, all of my work is within our portfolio, this would be single and multiple pieces presented to our customers. You see Aide you did declare that your view was Bosch and Makita are just as good as Festool, as an owner and user of Festool and one with experience of other brands I had to endeavour to enlighten you to your errors and help to correct you, I hope in a good way. Regards louie
@hydroruf6 жыл бұрын
My saw lasted one day. Awesome German engineering and express service was no where to be found.
@kickpublishing6 жыл бұрын
Bollocks - you're lying and you know it
@bighands696 жыл бұрын
+hydroruf What do you do with it. Thrown into a bath when it was running?
@clivejones87823 жыл бұрын
I have got far more respect for a tradesman with a canvas bag full of hand tools than someone with a truckload of these over engineered must have's.
@SkillBuilder3 жыл бұрын
If the purpose of a tradesman was to impress you rather than feed his family then he would starve.
@clivejones87823 жыл бұрын
@@SkillBuilder As a retired carpenter my experience goes back 45 yrs , while not making sweeping judgments the reliance of things electric and now battery powered tools take many of the skills out of the trade that's a fact.
@lege64457 жыл бұрын
I purchased this machine and the returned it the next day. You can't cut timber thicker than 30mm on a compound cut. The machine also tips over when attempting a compound cut. Look at how badly splintered the cuts are on the video. This is a terrible saw its so limited on the cut depth
@weedylock7 жыл бұрын
Dude that was cheap pine, no saw would make a better cut but i agree with you on the compound cut, doesn't matter for me as i will be using this for second fix.
@lege64457 жыл бұрын
My kapex 120 with a Freud blade rips even the cheapest pine leaving a crisp edge. I don't believe the 60 has the ability to spin the blade quick enough. When I returned my 60 I was the second person to do so in that particular shop that week.
@weedylock7 жыл бұрын
actually on kapex 60 the blade spins faster than on 120, but 120 is too big for me anyways and what blade were you using on kapex 60?
@lege64457 жыл бұрын
You are incorrect the kapex 60 blade at the point of the cut/rip is considerably slower In part due to less power and a smaller blade than the 120 (I have owned/used and tested both) The actual size of the two saws physically beside each other is minimal. It's the ability of both saws which is night and day. That is why the 60 Is such a fail
@lege64457 жыл бұрын
I was using the stock Festool blade. However I always change out the stock Festool blade for a Freud blade. The Freud blade delivers a crisper cut every time. I'm not a Festool hater, I'm actually a huge advocate of Festool products. I will however point out if something they sell is useless