First start of my OBR 30.5 full mod 30.5cc engine in my FG Marder
Пікірлер: 40
@Rondawwg4 ай бұрын
Beautiful beast!!
@jspeedrcАй бұрын
Great sound👌🏽
@jukkaovaskainen2 жыл бұрын
Engine sounds great 👍 Lots of power for that quite light FG 👍
@316RC2 жыл бұрын
Yes it is. It’s really gonna be something ⛽️💥⛽️💥
@linzitazim Жыл бұрын
Cool marder I had the 27.2 OBR fullmod. Good engines
@djcin10009 ай бұрын
you forgot to set fell safe on remote brakes to stop car if lost any kind of power to the remote brakes will lock
@soblessed64382 жыл бұрын
Hey Allen car looks and sounds really good!
@bluegroovemodelsports96502 жыл бұрын
Great sounding car
@316RC2 жыл бұрын
Yes, everything is good. 1st start is always a little nervous
@islandrc-duke19722 жыл бұрын
cool rc,sounds awesome
@316RC2 жыл бұрын
Thanks, always nervous on that 1st start 😀
@bluegroovemodelsports96502 жыл бұрын
Nice build Al
@316RC2 жыл бұрын
Thanks 👍🏻
@scottsimpkins9993 Жыл бұрын
Lovely buggy 🇬🇧🇬🇧
@geejayrc94012 жыл бұрын
Nice. That will be killer in the little Marder. What gearing you running in that
@316RC2 жыл бұрын
Right now I have the stock 19/46 in there for break in. After that I have a 44 spur and several pinions to play with.
@eastsiderc2 жыл бұрын
Nothing wrong with Sunoco its great fuel I use both VP and Sunoco 112 its the money fuel!! Its sounds good brother !!
@316RC2 жыл бұрын
Smells good too 😛. They sell the 112 Sunoco at the pump about 45 minutes away. So I’ll take a trip there every so often and pick up 5 gallons. Thanks for watching brother. Tell Braap mom happy Mother’s Day 😃
@bluegroovemodelsports96502 жыл бұрын
That little FG should be fast on that setup....
@316RC2 жыл бұрын
Yes should be 😜 fast ⛽️💥
@BlazerNL Жыл бұрын
Would love to see this run
@316RC Жыл бұрын
Soon!
@crashbash5554 Жыл бұрын
How has that obr 30.5 held up over this past year? I'm looking @ thier 29.5 or 30.5 for my 30dn dtt-7.
@jarviscrawford71943 ай бұрын
Did that motor fit straight in did u have to make any adjustments will u sell it ?
@316RC3 ай бұрын
No adjustment needed other than I had to replace the clutch housing on the OBR engine to a Zenoah FG housing. There is a special notch cut in the FG one because of the way the clutch carrier mounts.
@donwoodruffii3943 Жыл бұрын
Did you use a discount code ? If so what was it ?
@Serialcrasher Жыл бұрын
Running video of this beast soon 3:16 ?
@316RC Жыл бұрын
Eventually I hope 😯😯 A lot of life stuff has gotten in the way of RCs unfortunately.
@valeriocicchetta1774 Жыл бұрын
Dove si può comprare quel tipo di scarico?
@benjaminsermot3872 Жыл бұрын
Hello What's the whells? What's the exa? 24mm? Thankyou
@316RC Жыл бұрын
MadMax tires & wheels. Mine are FG square but also available in 24mm.
@user-vt7jw1cs1d Жыл бұрын
Where can i bay parts for the FG marder?
@316RC Жыл бұрын
DDM or RC car online
@mrboostification Жыл бұрын
Do you like the tires?
@316RC Жыл бұрын
I do they work great on pavement and hard pan.
@Robby-Dee Жыл бұрын
what pipe is that??
@316RC Жыл бұрын
DDM Dominator. You must slightly modify the Marder body to use this pipe. www.ddmracing.com/DDM-Dominator-Chrome-Pipe-for-FG-2WD-4WD-Offroad-Vehicles-DDM001
@Robby-Dee Жыл бұрын
@@316RC yes thank you will be getting that in 2 weeks I see they ship to uk aswell! Can you tell me what part do you need to modify? Would the carb need jetting after fitting it?
@316RC Жыл бұрын
@@Robby-Dee The body will need some trimming where the pipe will come in contact with it. I trimmed mine and then put some metal tape on the inside to protect the plastic. No need to do anything with the carb. What engine and carb do you have now?
@KHeidendal Жыл бұрын
Running in a new engine? Let it heat up to temperature and drive a few laps, let it cool down for 15 minutes. Start the engine and drive around en let it heat up. After its warmed up just rip it.