Fiat 500 Abarth Front Mount Intercooler with ATM Fenderwell Intake Install

[@toooldfortwowheels2048]

One of the few videos I've seen actually mount a TRUE cold air intake, everything else in the 595 is crazy as there's next to no air flow into the engine bay. I love this, time for me to source all of these parts in the UK!!!

[@frontwheeldrip4253]

Hey I got a shout out!!! Hahah that was me guys, I was the unfortunate subscriber doing the boost leak mod! I feel famous :)))

[@frontwheeldrip4253]

I also wanted to say that you should try a home DIY ram air setup for the intercooler like time attack/ track cars. Instead of hoping the air makes its way through the honeycomb grille and other bumper obstructions, you could make a cutout marching the size of the intercooler and seal it together so there is no air gap between the front bumper and the intercooler. I’m sure you’d be running a little colder!

[@stevey500]

That thing IS shiny and cool... This video has talked me into installing one on my 500e.

[@EveryOtherFridayOff]

Gotta keep those batteries cool somehow

[@NGENCustomsandPerformance]

Another great video! Keep up the great work!

[@themanontheroad]

The intercooler looks awesome 👍 My Forge intake takes cold air from under the windscreen, took under 1 hour to install, lunch included 😁 Looking forward to your but dyno test

[@vina_colada]

now that i see the fender intake comes with that bag and where it sits exactly im honestly not worried about puddles and stuff! im going to have to save for this.

[@trevorlynch6587]

Awesome video! I like it more than NGEN's lolol (not a diss to that vid, it's amazing as well)

[@ricardoubo8947]

Great video. Thanks for sharing. I have a White Fiat 500 Abarth Too!

[@JesterGP3]

This video was a lifesaver! Just did this exact same project. Question: How the heck do we refresh the air filter when it gets time?🤣

[@EveryOtherFridayOff]

I’m pulling the bumper and quickly trying to come up with a quick attach method for the bumper. Apparently some guys are disconnecting the intake from the turbo and reaching through. Guaranteed I would dump half a filter housing of oil down the intake if I tried it

[@jamesp2293]

Hi. Do you get the cool blow off noises with the ATM intake?

[@tthiagobritto]

Did you find a quick release system for the bumper? Doing the oil change I have braked the lateral tabs.

[@EveryOtherFridayOff]

I never have, still pulling the bumper the hard way for every oil change

[@mathewdavis358]

When is the new hp video from the new mods ?

[@EveryOtherFridayOff]

I had all week to test, and it’s poured rain every day. Hoping for a chance tomorrow, in which case video this weekend. If it’s still rain tomorrow, I’m either going to have to wait 2 weeks or find a weekend test track

[@Emoore0909]

Hey great videos! I have a 2012 model that has loud front wheel bearings, and I was wondering if you knew of a well-regarded 3rd party set of high quality replacements, or if I should just check with the dealer. Any experience with wheel bearings? Thanks!

[@EveryOtherFridayOff]

Sorry, no insights. I think this has been discussed a lot on the forums like fiat500usa forum. Good luck!

[@JustCreateYou]

What are the screw sizes for the windshield washer tank I lost mine 🙁.

[@EveryOtherFridayOff]

Sorry really don’t remember

[@JermsDNA]

Great content !

[@CrazyForCashews]

I noticed you have a front license plate. Do you think that impedes and negatively affects the performance of the FMIC because it's covering part of it?

[@EveryOtherFridayOff]

Some, but what I’ve seen is that temps drop like a stone as soon as I hit 30, even with a heat soaked engine. So I’m not worried about it.

[@CrazyForCashews]

@@EveryOtherFridayOff Thank you for your quick reply, good to know! It seems like a FMIC for the Abarth is a no brainer.

[@CrazyForCashews]

@@EveryOtherFridayOff Is a FMIC one of those "must-have" mods for the Abarth? Or is it mainly for people who autocross or track their cars? The SMIC aren't THAT bad are they? Also did you have any fitment issues with the CHQ/NGEN FMIC with your bumper and fender? Any noticeable gaps in the body or does it sit flush?

[@EveryOtherFridayOff]

@@CrazyForCashews Not a must have. The double bonus for me is being able to put the intake where a side mount was

[@hardankles3382]

Very helpful!!!!! Thank you!!!!!

[@colindefilippo4567]

what was the name of the intercooler you bought?

[@EveryOtherFridayOff]

Mine is the NGEN kit

[@GeneralObservation24]

Finally!!!!

[@JewBronJames]

Whats the easiest way to get the oil filter out now?

[@stephenwoskoska4984]

Hey, have you done a oil change with the atm intake? Do you have to remove the bumper to get the oil filter off?

[@EveryOtherFridayOff]

I remove the bumper. Some pull the intake from the turbo to make room.

[@Nikos6j]

Do you know aproximatly how much hp did the car get from these mods?

[@EveryOtherFridayOff]

The “more mod testing” video includes dyno runs and hp numbers

[@Rcf011]

Do i need to correct my Ecu , after instaling an intercooler?

[@EveryOtherFridayOff]

Might not be required, but if your not tuned, do that long before messing with an intercooler

[@Gianmarc]

Awesome videos, really well done!! What led you to go with the fenderwell over the cowl Intake from ATM?

[@EveryOtherFridayOff]

I've seen numbers where they are both supposed to have similar performance, and I've got zero evidence to dispute the claims of the cowl intake, but just looking at where they sit and run, it sure seems to me the fenderwell ought to be a cooler position. I also really like the clean engine bay

[@vha27]

Also I’ve heard with the cowl intake, you hear a lot of intake noise. I personally have had the fender well intake for about 2 years. Only issues I’ve had are the plastic caps can crack on the reservoir and fill.

[@BrodeyDoverosx]

Thanks for the video. I'll be using to install my ATM FMIC this weekend. Also, I haven't heard back from you about the tune, do you still have the FIAT?

[@EveryOtherFridayOff]

I do, and I ran the tune all year. It was great! I just haven’t had time to mess around with the videos

[@BrodeyDoverosx]

@@EveryOtherFridayOff definitely hit me up. I’ve learned many things :-). Again thank you for the video. My install was completed using intuition and by watching your video since the link for ATM’s install is “private”. I didn’t remove my headlight; that was a mistake. I also had the grommet pop inside the reservoir and caused my motor insert to bend…. All is well but the struggle is real. Lmk what you come up with for quick releases on the bumper.

[@hoomdiyada]

Can I hear what it sounds like?

[@EveryOtherFridayOff]

hoomdiyada Coming next week!

[@bigb0ss282]

Why not open that fake intake on the bumper? It's so close to the intake...

[@jeffvaljean6030]

Ive made mine look like a normal fiat 500 a so called wolf in sheeps clothing

[@tsnaha]

Bumber off to change oil....lol...wow

[@JLUnlimited]

People need to STOP saying "Philips head screw" . .

[@EveryOtherFridayOff]

Never heard this. What should we say?