Great video. There were a few other things that I found out as I went: 1) a T-20 torx works on that first screw. 2) There is a little slot in the plugs that hold the bottom panel on. Put a flat blade screwedriver in the slot, and twist - the pin will pop out, then the panel can be removed easily. It's possible to use a fingernail to do that, too. Don't try to pry the whole plug off without popping the pin out, that's wasted effort. 3) To release the black connector, there's a tab to squeeze on the back. To release the white connector, there's a tab to squeeze on the front. 4) A 7/32" socket works on the screws for the cover if you don't have 5.5 mm. 5) No kidding, the filter needs to be scrunched to get it out and get the replacement in! Remember that the pleats run vertical, and that the airflow arrow points towards the back of the car.
@placesbramlepoops Жыл бұрын
Try doing that with the steering column and pedals in the way😂
@rikvermar7583 Жыл бұрын
damn! i was about to say that lol 🔧🤬
@mauricioibarra7012 жыл бұрын
Great video
@rikvermar7583 Жыл бұрын
this is for left hand drive models, right hand drive models the steering column makes this job a nightmare
@theKobus2 жыл бұрын
Perfect
@markbury141 Жыл бұрын
Rubber gloves to change a filter? Are you kidding.