Fiberglass mesh Impregnation line

  Рет қаралды 279

Matthew Bao

Matthew Bao

Күн бұрын

Glass fiber mesh fabrics is made of medium-alkali or non-alkali glass fiber yarn and coated with alkali-resistant polymer emulsion.
Due to the special material properties of mesh, it is stronger and more durable than ordinary cloth because of its high strength and good alkali resistance.
Interior Wall Products
Mesh cloth is made of medium-alkali or non-alkali glass fiber yarn and coated with alkali-resistant polymer emulsion. Mesh cloth series products: alkali-resistant GRC glass fiber mesh cloth, special mesh for alkali-resistant walls and stone mesh cloth, marble back-adhesive mesh cloth.
The main purpose is widely used in:
1) Wall reinforcement materials (such as glass fiber wall mesh, GRC wallboard, EPS interior and exterior wall insulation board, gypsum board, etc.
2) Strengthen cement products (such as Roman columns, flues, etc.).
3) Special mesh for granite and mosaic, marble backing mesh.
4) Waterproof membrane cloth, asphalt roof waterproofing.
5) Reinforce the skeleton material of plastic and rubber products.
6) Fireproof board.
7) Grinding wheelbase.
8) Geogrid for highway pavement.
9) Caulking tape for construction, etc.
General Specifications:
1 Mesh size: 8mm × 8mm 10mm × 10mm 12mm × 12mm
2 Width: 60 cm 90 cm 1 meter
3 Weight per square meter: 125 grams
4 Length per roll: 100m or 50m
5 colors; white (standard), yellow green or other colors.
6 Packing: according to customer requirements.
7 Special specifications and hardness can be made according to customer requirements.
Fiberglass self-adhesive tape
Uses: Repair drywall, gypsum board joints, cracks in various walls and other wall damage
Fiberglass self-adhesive tape
Main properties: excellent alkali resistance, durable: high tensile strength and deformation resistance, anti-crack: no deterioration, no foam: excellent self-adhesive, no need to pre-coat, quick to use, easy to construct.
Specifications: 8×8.9×9 mesh/inch: 55-85 grams/square meter.
Width: 25-1 000 mm: Length: 10-153 meters.
Color: Usually white.
Construction method:
1. Wall surfaces are kept clean and dry.
2. Apply tape over the crack and press tightly.
3. Make sure the gap is covered with tape, then cut off the excess tape with a knife, and finally apply the mortar.
4. Let it air dry, then sand lightly.
5. Fill with enough paint to smooth the surface.
6. Cut off the leaking tape. Then, notice that all cracks have been properly repaired, and use a fine compound to touch up around the joints to make them look like new.
Alkali-resistant products
Architectural grid cloth is based on medium-alkali or non-alkali glass fiber woven fabric, which is treated with alkali-resistant coating. The product has high strength and good alkali resistance and plays an important structural role in the insulation system, mainly preventing cracks. Due to its excellent anti-acid, alkali and other chemical substances corrosion performance and high tensile strength in warp and weft, it can make the stress on the external wall thermal insulation system evenly distributed and can avoid the entire thermal insulation caused by the collision and extrusion of external impact. The deformation of the structure makes the insulation layer have high impact strength, and is easy to construct and quality control, and plays the role of "soft steel bar" in the insulation system.
The alkali-resistant tensile breaking strength of the glass fiber mesh in the warp and weft directions shall not be less than 750N/50mm, the retention rate of the alkali-resistant tensile breaking strength shall not be less than 50%, and the weight per square meter shall be ≥130 grams. The JG158-2004 glass fiber mesh warp and weft alkali-resistant tensile breaking strength shall not be less than 1250N/50 mm, the alkali-resistant tensile breaking strength retention rate shall not be less than 90%, and the weight per square meter shall be ≥160 grams.
Common specifications:
- 4 x 4mm, 165g/m2, 1m x 50m
- 5x5mm, 80g/m2, 120g/m2, 145g/m2,
- 250g/m2, 280g/m2, 300g/m2, 1mx50m
- 4 x 5mm, 135g/m2, 145g/m2, 1m x 100m
- 7 x 7mm, 140g/m2

Пікірлер
Fiberglass mesh coating machine
1:26
Li Sophia
Рет қаралды 20 М.
The joker favorite#joker  #shorts
00:15
Untitled Joker
Рет қаралды 30 МЛН
Minecraft Creeper Family is back! #minecraft #funny #memes
00:26
Man Mocks Wife's Exercise Routine, Faces Embarrassment at Work #shorts
00:32
Fabiosa Best Lifehacks
Рет қаралды 6 МЛН
The selfish The Joker was taught a lesson by Officer Rabbit. #funny #supersiblings
00:12
Anodizing 101: Professional Level Finish At a Small Scale!
12:31
Iron Forest Knives
Рет қаралды 17 М.
Melamine Paper Impregnation Line Operation
2:31
Matthew Bao
Рет қаралды 256
Redwood Destruction at Sawmill
14:12
Teak Eyes Tv
Рет қаралды 10 М.
How is the HARDEST, most expensive, and beautiful stone in the world made?
38:48
Бизнес без границ
Рет қаралды 2,9 М.
The joker favorite#joker  #shorts
00:15
Untitled Joker
Рет қаралды 30 МЛН