Live training on G+12 Multi-Storey building in Etabs 2016 | fieldReady

----Etabs + Revit + Staad foundation + 3D Max + Vray + AutoCad
fieldready.co....
----Etabs & RCDC Advance Dynamic Analysis Course: Advance Level*
fieldready.co....
Students from Around the world | 7 years of Professional Teaching…..
#fieldReady #etabs #civilengineering

[@RahulGoyalloudburp]

the best theoretical and practical explanation about design of RCC structure on youtube so far...Thanks a lot, may god bless you

[@manpreetsingh736]

really helpful & great content explained by you in depth sir.... Applause for your hard work.

[@nikhiltiwari8397]

Thanku sir It very helpful for us Now I am in 2nd year but I have understand very clearly❤️

[@vikramadityamathur]

Your knowledge is fantastic and we shall be always ready to learn from you.

[@arunKumar-rw3rp]

Thank you so much sir Please keep sharing sir.

[@unknownok1939]

Nice video sir. Can u teach us on design and analysis of circular and irregular buildings

[@treft3853]

thanks a lot, Anil love from Pakistan

[@dheerendra003]

Plz discuss about softstorey Sunken slabs Deductions of wall loads for openings Lintel loads Soil structure interaction Envelope load combination

[@knkllm6289]

thank you very much sir

[@narzi100]

For seismic load - the range shall be from base to top floor only ....

[@fieldready4597]

Structure above the ground which is free to move to the top floor. For more details visit: www.fieldready.co.in

[@praneet7]

Thanks 👍

[@abhisheksen325]

sir i request you to please make a video about staad pro g+12 which include shearwall

[@yogeshmandal24]

Sir ...how to decide...which type of footing..to be designed ..what size of footing ..column..dai of bar ...should be taken in the building...plz...response..

[@bim_design__engineering8932]

sir please provide guided notes also on steps using and structure concept I want to join your course as soon as

[@mrizwanmhanif]

why each column on each corner of stair case..? we can also assign columns for the support of landing beam only.

[@ahidbhati4909]

While deifining section properties for beam, columns, one should change property modifiers based on effective moment of inertia or not?

[@fieldready4597]

AHID BHATI Eleborate more on this via pics. Send us to [e-mail]

[@jacbadz2109]

The same question with ahid bhati..need to change the property or not?

[@shadabshaikh3061]

How we decide the size of member initially....?

[@fieldready4597]

Upto G+3 Column: Minimum 1ft * 1ftBeam: Minimum 1ft * 1.5ftAbove that as per design results. No fix rule.

[@vaibhavshroff4845]

sir will you please upload a seperate video for detailing part???

[@fieldready4597]

Detailing has been covered in detail on www.fieldReady.co.in/designpreview.php website.

[@SanthoshKumar-my6fw]

Hello sir.. you have not considered the column offset/eccentricity from the grid center line (between 0 & 90 degree orientation columns) as per the centre line layout.. doesn't this affect the design?

[@SanthoshKumar-my6fw]

& thanks for your effort.. I will inform my friends about your courses

[@muhammadabdulmudassir4259]

Where we provide shear walls

[@satishjangid4947]

Every nice boss

[@syedsameeulla1459]

Sir , if the building is irregular shape how we can take dimensions accurately for Centerline to insert in etabs

[@fieldready4597]

For irregular buildings we import the AutoCAD plan for Centerline Reference.

[@mohammadsameerali3102]

How to design and load analysis for the extra bars in beam??

[@fieldready4597]

For that visit: www.fieldready.co.in/combopreview.php

[@hsrana9302]

Really execellent

[@showmitrabarua119]

How much cost will it take to buy this software? Can you tell me please?

[@fieldready4597]

Hello Showmitra, It will cost Over 2 lac INR. You can negotiate it with the sales team for some discount.

[@rajeevsinghpatial2174]

How many sessions (Live) happened so far ??

[@fieldready4597]

One, for complete courses you can visit: www.fieldready.co.in/combopreview.php

[@yakoonkhan4971]

Sir How can I export detailing from etabs in pdf formet?? Plz reply sir.. I find difficult in it.

[@fieldready4597]

yakoon Khan First export it to AutoCAD then from AutoCAD export it to pdf.

[@yakoonkhan4971]

Thanx sir

[@yakoonkhan4971]

may I trust in giving steel by etab in beam

[@alexbulungu228]

Hi how can I get that PDF

[@fieldready4597]

fieldready.co.in/megacombocourse.php

[@maheshbajabale7921]

how to download etab sir

[@fieldready4597]

www.fieldready.co.in

[@kishank633]

Thank you sir for shearing you experience and Knowledge.. waiting for Next Video..

[@StephensLandefort]

Hmm

[@fieldready4597]

fieldready.co.in/megacombocourse.php

[@weareshroff8243]

sir please will you share that autocad plan and etabs file so it will be easy for me to get refrence from your file

[@weareshroff8243]

great video sir

[@AnilChoudhary-uc1mu]

Sir Etabs, Revit software ke liye laptop ka graphics kitne GB ka hona chahiye Mere ko new laptop lena hai 4GB 3050 ya 6GB 4050??

[@fieldready4597]

4 GB Graphic card is enough. Here the Best Laptop Link: kzbin.info/www/bejne/n6WroWyAqr10odk

[@tuncayozisitmez2721]

Sir please new video,new project.from the Turkey selam selam.

[@SaunakSharma]

If you are using response spectrum method program calculated time period is ok but if you are using equivalent seismic coefficient method I think time period should be user defined

[@Cdramab]

This is what exactly looking for... Thank you sir... it worth a lot.

[@mayanksharma9606]

Please give an advice that which laptop I Should Buy that will suit to the smooth operation of Autocad,Revit,E tabs,Stadd Pro..

[@fieldready4597]

HP | i5 | RAM 4GB | Full HD Display | 1TB HDD

[@showmitrabarua119]

Helpfull tutorial indeed ! mr. Anil thank you very much from dhaka.

[@faizankamal6844]

Sir, what are the checks we do after running analysis and How do I know if my ETABS modelling and analysis results are safe in any way? What specifications should I check? PLEASE answer to my questions, sir

[@fieldready4597]

For learn the complete check visit: www.fieldready.co.in

[@mdkhizerhayat4589]

Thank you sir for this video. I have doubt about how to delete slab for staircase. Video timing 1:18:38 . any one know how to delete selected slab plz show me.

[@fieldready4597]

For doubts contact [e-mail]

[@sarangmote9169]

Hello Anil sir... This is Sarang ,I am working with a MNC oil and gas industry and currently working on staad pro.. And wanted to learn Etabs . But I have not joined any kind of classes because I know every one teaches only the commands of software. But the way you teaches is really different and knowledgeable than others and finely I have decided to join the course of Etabs with you.... Thank you so much sir....

[@fieldready4597]

Hello Sarang, You can join in the course directly from the below link: www.fieldready.co.in/combopreview.php

[@asadejaz9649]

Greetings From Pakistan it really works. Thanks

[@football-co3lf]

It helped me a lot for my buidling project in bachelor, thank you very much.Love from nepal❤❤

[@fieldready4597]

Glad to hear that

[@jayyadav6823]

thanks a lot for this sir....love from Nepal😍😍

[@nossamharoon8837]

Good evening sir U r explanation is too good sir I have one doubt sir In ground floor we need to provide slabs or not, because in below ground floor have soil and there is no need to provide slabs to take loads

[@fieldready4597]

Only provide slab in the ground floor when there is a basement.

[@allaboutcivilengineeringco417]

Sir kindly guide me how i can buy thi course as i am trying to buy this course from one Week ago but i failed ...i am from Pakistan so please guide me how i can buy this course .

[@fieldready4597]

Contact our support team they will help you to enroll into the course. [e-mail]

[@SenthilkumarRamarajMannur]

Sir, While applying load replacing existing load (which is default) instead od add existing load, is it correct?

[@fieldready4597]

Choose replace the existing option most of the times. Only choose add existing when you want to add the new load to the existing loads.

[@SamStark66]

Love and Respect from Pakistan. Regards, Your Future Student.

[@petevatuloka9182]

Just 30mins into this and I'm so glad I clicked on your video. Definitely getting a subscription from me. Thanks for sharing your knowledge and experience.

[@sajidullah3559]

Thank you Sir, plz upload shear wall & Stair Design in Etabs

[@fieldready4597]

Coming up in the Advanced course. Staircase design is in the Etabs course.

[@akashshah4409]

This video really helpful for me for learning etabs software. thanks

[@rajbharti2699]

Sir G+10 building ka design ka etab mai Hindi Mai video dalyai

[@obedtari8390]

Please Sir can you do one more session tutorial on Etabs

[@erjavedahmadbagwan17]

Tekala structure par vidio banaeye

[@royking9403]

Sir please one more live session in continuation to this live session. I meant advance live session sir as u said in the video.. it's super helpful. Please do another live session sir, it's been more than half an year now since ur last live session was updated. Waiting so badly for it. Thank u once again sir.

[@akleshverma957]

Thank u sir lots to give us such valuable time

[@theutaybipara1249]

Deeply explained Step by step procedure Thanks sir.

[@zisamchan70]

Thank you so much. Your video helps me a lot.

[@subashpathak4638]

If the partition wall is on the floor not above the beam.....How to apply that load

[@Joshua0337ify]

He said no need to apply load at partition walls on slabs because of safety factor used.

[@tejaswinibappudisundar6540]

One more live section including slab beams and unsymmetrical columns orientation please

[@rizwanbhata5279]

Good work sir . Need some more videos like analysis and design of elevated watertanks .

[@sairammudumba2164]

At 4 corners column center is not exactly coinside with beam centerline then how you will adjust there ( we can adjust column or beam ?)

[@DavidSchmith7]

Thank you very much for such a great session, learned so much

[@insightsofcivilengineering6772]

Sir thanks for the live session, sir is structural detailing is added in your course? Means to transfer this data on site so that the person who is executing it can understand.

[@fieldready4597]

For complete detailing visit: www.fieldready.co.in/combopreview.php

[@akashshah4409]

can you provide this AutoCad file for practice purpose?

[@fieldready4597]

Contact us at [e-mail]

[@prafullapokharel1486]

Sir, can you upload some thumb rules for fixing the dimensions of beam and columns?

[@abhi_dubey94]

Totally worth watching +3 hours. Learnt. N no.of things about designing a rc structure that too with simple and coherent explanation.great job sir..👍

[@fieldready4597]

Glad it was helpful!

[@abhi_dubey94]

@@fieldready4597 sir pls do more online live classes..

[@manoharmanu6734]

plz add a video on the design of eccentric footing and retaining wall

[@goytomberihu]

hiii

[@fieldready4597]

For further learning on Etabs visit: fieldready.co.in/megacombocourse.php

[@mailvraju]

DEAD LOADS ARE CALCULATED AND YOU HAVE CHOSEN REPLACE ALL OPTION ,I HAVE A QUESTION HERE SIR -DOES IT RESULT IN OVER WRITING ALL PREVIOUS DEAD LOADS INCLUDING SELF WEIGHT -PL HELP US IN UNDERSTANDING

[@InderjeetSingh-lf4ib]

Sir i am a civil engineer in bridge as a site engineer from your video I get a great knowledge of structural design. But sir what software used for bridge designing. Thank you very much sir. 😀😀😀😀😀😀

[@fieldready4597]

For Bridge design consider CSI Bridge.

[@saqibahmedkhan9210]

Dear Sir how much money will be paid for your course

[@fieldready4597]

The Mega course fee is Rs 5500/- which included all 5 courses with lifetime access. For more details visit: fieldready.co.in/megacombocourse.php

[@lelinshrestha9782]

it very helpful and nice..thq u very much sir

[@shivpalchouhan6692]

Very useful video..thanks sir

[@vinayakkalan9829]

i dont knw ;what i should say for this Live session. its great work, its extraorinary work which i never ever saw before without demanding single ruppee frm viewers. ...n u gave us such imp knwldge!!!! i surely wants to join our "FieldReady" world and i would like to part of same...bcoz i m crazy about STRUCTURAL ANALYSIS N RCC DESIGN . grt work sir...keeeeepp itt upppp!!!!

[@yakobyawo7624]

thank you,learned so much.

[@himabindu4764]

When will be the next live session

[@ashish2591786]

i want to learn design and analysis of steel structures in stadd and etabs with mannual understanding . Please also provide PEB course

[@fieldready4597]

Hello Ashish, you can get complete info about the Etabs structural design course at: www.fieldReady.co.in/combopreview.php

[@mohdkaleem1173]

Hiii

[@yadunandantn5389]

Sir how did you choose, 1ft and 1.5ft beam directly. What is the basis for this assumption.

[@yadunandantn5389]

And even column dimention

[@fieldready4597]

Standard size to start with: Column: 300 X 300 Beam: 300 X 450 Small span beams: 300X300

[@sushilbasi7391]

Sir, How can we certain that the analysed model is correct? and What are the Clauses to be considered from IS code for designing? And also make a video on analyzing the modal mass participation ratio table of ETABs if possible for our knowledge. Thank you.

[@fieldready4597]

We have talked about this in our courses. For more info visit the link below: www.fieldready.co.in/combopreview.php

[@CIVILWITHSUDHEER007]

plz send me the etab software link i dont have latest software!!!!

[@fieldready4597]

www.csiamerica.com/support/downloads/software-evaluation-request?productnid=222&product=3

[@anishkumar7725]

very helpful sir. thanks a ton

[@adilbabusmart3563]

Sir hindi language

[@vimalnath4419]

m35 grade different for different structure ,how to decide sir,calculation mean to write & show image view sir plz

[@ankush329]

Sir, can you plz tell me, how to decide column size while modelling , because we have not designed column yet....

[@tekkanpandit5182]

Helo sir am I from Nepal and I join your session with paying condition But I did not know how to join by paying money to see your all videos Plz help me

[@fieldready4597]

Share your email address to the support team at [e-mail] They will send you the complete course joining procedure.

[@SenthilkumarRamarajMannur]

Dear Sir, You have taken the foundation depth is 2m and 1 m plinth height. Considering that height 3 m as a storey height. But normally this 12 storey building foundation required more depth and we go for Pile foundation. In that condition how we consider the no Of storey?

[@fieldready4597]

Generally any building > G+3 or more has a basement so we didn't have to take depth factor into account. Basement depth will take care of it. For buildings without basement you can find out the depth with the help of the depth formula.

[@mohdnaveed463]

Can any one plzz send me the link for downloading of etabs updated software...

[@naziskhan9]

Ullu

[@fenetabebe1431]

go to on www.civilabc.com

[@civilsitewallah]

Thank you so much sir ❤️😊

[@hdr-tech4350]

Thank you so much sir, for this great help

[@VAIBHAVSPAL]

We want 01 more live session sir

[@fieldready4597]

Will be live soon.

[@mohdkaleem1173]

Hyy

[@sudant-peacefoundation4252]

Thank You Sir. We love you...

[@babulchandra8760]

Great honour and Love from Bangladesh

[@fieldready4597]

Love from India as well. For more details on courses visit fieldready.co.in/megacombocourse.php

[@maryrajamjani9259]

I have experience in design with Safe. How much time will be required for me to learn ETabs?

[@fieldready4597]

Only 15 to 20 days. For more info visit the link below: www.fieldready.co.in/combopreview.php

[@mdsolayman3886]

sir, why don't show working story level with 3-D window in ETABS 2016 ,according to previous version of etabs

[@fieldready4597]

3D window is available in Etabs. Separate 3D view is also available. What exactly 3D you are talking about?

[@babulchandra8760]

Exceiient and Outstanding Thanks a lot sir

[@fieldready4597]

Thanks for your kind words.

[@viveksaxena4455]

Sir I want to ask which version of etabs should I download? I have not latest configuration of pc consisting i3 and 4gb ram. So I want workable environment...... Please suggest.

[@fieldready4597]

With no doubt Go for Etabs 2016. Its the most stable version of Etabs compared to 17 version & it will be light on your system.

[@viveksaxena4455]

@@fieldready4597 Thank you

[@civilengineerknowledge6620]

thank you sir

[@RJ-nw4pb]

Waiting for advance design video

[@naveensingh9237]

Is it possible to do in StaadPro or we should know both the software basics to handle major Project.

[@fieldready4597]

Yes its possible to do, but Etabs is easy to handle & have advanced features as well.