Fiero Slim Popup Headlight 4x6 Upgrade

[@FieroAustin]

**NOTICE**: NEW RETROFIT SLIM POPUP 4x6 HEADLIGHTS THAT CAN FIT MODERN BULBS (NOT VACUUM SEALED) - amzn.to/3O7mTxA Fiero H4666 Headlight + bucket assembly part numbers - any which one works, whatever is cheapest. If you want to use the stock adjuster locations and make brackets for that, pay attention to right/left sides. Find vacuum sealed here (SEE RETROTIFT ABOVE - MUCH BETTER CHOICE): www.rockauto.com/en/catalog/buick,1985,century,3.8l+231cid+v6,1015377,body,headlamp+assembly,10762 Part numbers for vacuum sealed 4x6 (search ebay/google shopping): GM2500117 GM2501105 GM2501104 GM2501106 GM2500113 GM5973929 Idea inspired by this post: www.fiero.nl/forum/Forum1/HTML/085387.html I use the stock 87/88 headlight assembly for this. It will require you to modify the stock housing. I did my swap for $14. It may cost up to $60 if you buy new. AKA Sleepy Eyes Tools I used: Round/rat tail file Rectangular file Philips Head Screwdriver Dremel/Grinder & Cutting Wheel Drill 5/64" drillbit Punch Welder 1" longer adjuster bolt (same thread as stock) 10mm deep well socket & 1/4" drive wrench Amazon Recommendation Store for 3800s/Fieros/Tools amzn.to/3hNViaa 3800sc Instructions www.fiero.nl/forum/Forum2/HTML/139530.html 3800sc Instructions MOBILE drive.google.com/file/d/1wqUJdMZ1XqcKJzC-2ZzbvLYMYE3QbmVq eBay affiliate (use & I get paid) ebay.us/4gTj2A Donate to me www.paypal.com/donate/?business=8AFWKBTBVSKTJ Join channel membership kzbin.infojoin Subscribe kzbin.info Consulting on Facebook facebook.com/FieroAustin/

[@MercedesE63S-AMG]

Your left glove is toast

[@FieroAustin]

LOL yep

[@550sized]

I went the 60mm HELLA route, got the buckets and waiting harness from Danyel Boucher ( you can find him on facebook), about $290 all said and done...

[@FieroAustin]

A little more than my $20 upgrade here haha. Hey I just ordered these, they should be better because you can retrofit the bulb with a new, brighter modern bulb and you're not limited to the vacuum bulb - www.amazon.com/gp/product/B00683KT2C/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1

[@scottpayne3085]

very good how to video

[@FieroAustin]

Thanks!!

[@paulpolo3360]

I have an 86 Fiero brilliant blue convertible purchased from Holland Pontiac (70 made), v6, 5 spd, a/c.,pb,pw. Closed conv..targa and open conv W/ 20 k mi. Garaged and very clean......I am 82 and heavy set and entry and exit is troublesome........If I do not sell it I would like to modify the headlite system....and install the power steering unit mfg by West Coast Fiero......... I really like your headline looks.....I look forward to your comments......Paul Polo0

[@paulpolo3360]

[e-mail]

[@FieroAustin]

Hello Paul, I think the power steering would be a very good upgrade. I enjoy the lack of power steering myself. That would require quite a bit of work though. You would find it easiest to remove the hood for some elbow room, and then remove the spare tire/jack and also remove the plastic molded housing that holds the tire/jack. Then you will be able to easily access the steering rack. The slim headlights was pretty easy in my opinion. It is a little trick to aim them, but it does work. It took maybe 45 minutes to do each side for me. It doesn't add any brightness to the lights from what I can tell, unless you go to a different style of bulb (HIDs).