Fiesta mk5 2002-2008 triple dash how to remove & refit a radio simple step by step guide

[@everclear1984]

Excellent tutorial, thank you. I was going to replace my sterio but after watching this I think I'll just replace the car!!

[@benyoung5562]

If you give me the car, I can use three case and a 12 V battery with the cables for the radio, the antenna for the black car stereo

[@carolineyoung5487]

PJ, don’t worry because I’ve already got a black one from regards 05 Ford Fiesta car radio dad sold it over a week ago and out and I’ve got it but I need some type of way to do it and we’re trying to make it into a man can you suggest anything please PJ And if you can help us do it please if we can once again it’s from my dad’s old 05 Ford Fiesta 2005😊

[@TheTreason666]

Exactly 😂

[@Random9940]

Today was the day of reckoning. I watched this vid a week ago, ordered all the parts and today I fitted it. This is a awesome vid and easy to follow. The job was tricky but not impossible. That heater cable had me close to giving up at one point. Thanks again for help. My old fiesta now has DAB! Awesome!

[@skydancekljuc]

Which android radio fits in?

[@carolineyoung5487]

A farting Samsung galaxy, S 23 ultra

[@ZoneKei]

Wow what a great tutorial. Actually stating what is required, how long it'll take and how hard it is.. amazing

[@hihi_7386]

I fitted the same stereo in my ford fiesta style 05 whilst following you video today. I have no experiance with cars and only passed my test on Monday, but successfully managed to do it on my own! Took 2 hours and a lot of screws and swearing but it’s perfect! Really helpful video I couldn’t of done it without it! Thank you for the great content 😊

[@MrHamzah88]

Hi, where did you getb the facia from as i only find the ones that have the cd player at the top...last one i used broke due to weight...so need the one that fits in at the bottom. Any chance you can help?

[@carolineyoung5487]

If you like the exact same Radio case, if you have a free part stereo, I’ve got one if you want one😊

[@emmanuelnaudin6726]

Thank you from France!This video allowed me to change the radio in my daughter's first car, a 2004 fiesta equipped with the original tape radio....

[@hihi_7386]

Was looking for a tutorial to fit my own stereo... I have all the same parts, same stereo, and car. Life saver!

[@simonlidbury6745]

Such an excellent video, thank you so much. Just competed an install on my son’s ‘new’ 03 Fiesta and I wouldn’t have been able to do this without your help. Thank you.

[@jessicaearl-yh5vj]

Thank you so much!! I just replaced mine thanks to your tutorial! I feel so capable!! Thank you again! X

[@JamesewoodsHD]

You're a legend! Thanks for this tutorial. I've successfully replaced the awful three-tier radio with my bluetooth stereo. Cheers! :)

[@SayouriH]

Omg thank you so much for your video. I been stuck q hour on how to put the small plug for the AC directions and I just didn't figure out it was so easy. If not for your video, I would've just given up on it haha. Thanks for the amazing tutorial.

[@vexed0262]

Amazing tutorial mate, got a work horse that needed an upgrade and had no idea, amazing thank yoy

[@deaconcope8415]

Just wanna say thank you for thr video! Saved £40 by following your simple step by steps, it was very easy thank you!

[@willward952]

Big thanks to PJ's projects for the guide. Have successfully completed my installation of my Pioneer cd/mp3 car radio. Can tell you that the, Ford Fusion 2006 is slightly different than the Fiesta as you have to remove the switch from the hazard button also. I broke some of the clip trying to do this, but all is well and is still working. Just be careful when trying to remove the hazard button for Ford Fusion. I fitted this with no lost screws and the heater controls were the most difficult, further more, I used a soldering iron to smooth out the cuts after using clippers to remove the unwanted 2 tier bands, then used a triangular file to clean up to a neat finish. All in all a good job, although this takes much longer than an hour relating to the heating controls, fiddling around. I also used a plastic Bojo tool to undo the clip then removed the steel loop off the heater on the drivers side as illustrated. :) Job's a good one. can recommend this. I put my radio in the top slot and the coin holder at the bottom. Various Bojo tools cost £7.99 for a pack of 4. Fitting kit was £10.70. All bought on eBay.

[@zoom8772]

It suddenly makes sense why the original radio was still in my car when I bought it last year lol . They sure didn't think this one through! Thanks for the helpful video though I just won't take the risk of breaking anything

[@Qan]

Der PJ, thank you for sharing this great video with us. Thanks to your easily understandable explanation my wife and I were able to fit a new stereo in our lil Ford. :) It was the first thing we ever worked on ourselves in a car. Cheers, Qan

[@alanproctor8324]

thankyou for taking the time to make this tutorial, really helpful.

[@DjILZ]

Cheers mate, never fitted a car radio before, used this to put a new one in the missis Fiesta, great walkthrough

[@freaklives]

Thanks for the great video. I just swapped mine out and I couldn't have done it without this vid. Cheers!

[@spyrosp.2351]

We have a Ford fiesta of 2005. At 2015 my mom changed the radio and I really miss it. I like the old radio more than the new... If I were her I would never change it...

[@zanholc1703]

I have a fiesta and this is the best video ever you helped me so much man thank you!

[@burtcocain2]

Excellent video,changed the radio in my sons 2005 fiesta with no problems at all 👍🏻👍🏻

[@danm1911]

Just another comment to thank you for the video. Got rid of my Ford 4500 today in favour of a better stereo, and would have had major problems without this, so cheers mate ;-)

[@albinowallaby]

Thank you so much for this great video, really indispensible when I was installing a new radio in my fiesta.

[@jimme8499]

Thanks for a brilliantly clear and concise video. You are a star !!!

[@seancarritt2438]

Thankyou Pj so much for your fantastic step by step tutorial. I managed to fit a new DPX 350u kenwood double din and it looks and sounds sooo much better than the original crappy stock Radio. So thankyou sooo much. It really helped in a very big way.

[@NBAhoney]

Where did you get a double din for your Ford Fiesta?? I can’t find one anywheee

[@g_cooper]

Huuuge thank you!! So useful! Managed to completely switch with no major problems - huge thanks again!

[@paolomariagallo4679]

Great job man! I think the best tutorial on KZbin! 👍

[@Chilternflyer]

Thanks for posting this. It helped me fix the broken heating controls on my daughter's Car! :-)

[@P_Esco]

Worked for me, pretty easy too :) Installed a 7 inch touchscreen just yesterday so..Thank you!

[@netprofm]

Thanks for making this video! Very well explained and filmed.

[@MrBonyPantsGuy]

Thank you for taking the time to make this, so helpful cant wait to finally get an aux adapter in the car lol

[@stefanonovelli9810]

Thank you very much and many compliments for this perfect tutorial!

[@Maxi0072007]

Hello PJs projects, i would like to thank you for this tutorial as you helped me a lot changing my climate control interior lighting bulbs. Hope you're ok that i will share a Link under my video to this your tutorial made a way much better. Thank you!

[@PJsprojects]

Happy to be of help.

[@86Mastro]

Very perfect tutorial. Thank you!

[@rejekt2]

This helped me a lot, thanks!

[@alexanderbassett1857]

Just do this to my 2005 Ford Fusion. You have to remove the hazard warning switch which is a pain but apart from that it almost the same. Thanks PJ

[@AndyMan365]

cheers mucka.. thorough explaination of the job 👍🏻

[@randomrandomz7395]

Thank you, video helped me to get mine done!!!!

[@KMURK]

Thanks! Absolute legend

[@olivercouch1651]

Perfect guide, thanks heaps 👍

[@kenrichardson8558]

Many thanks for that link PJ - think I’m good to go now. All the best Ken

[@kenrichardson8558]

Sorry one quick final 😀 question - with the 3.5mm patch lead for the remote volume controls as per the link you sent me, does it connect into the front of a head unit or the rear. Just thinking that if it fits into the front of the head unit does it sacrifice using the socket for other things (aux) in which case I might consider ignoring the remote volume controls? Plus I guess it would look untidy too?

[@kenrichardson8558]

Perfect, new Pioneer radio fitted and working with stalk controls all working fine. Absolutely top drawer, many thanks PJ!

[@johnparkinson881]

cool guide im changing mine to a double din now i know how to

[@jaredfinch2429]

Big up you PJ, you sorted me out nicely

[@TheGamerTomHD]

This was super helpful! Just what i needed, thanks a lot!

[@zanden69]

Thank u so much, your tutorial is verry good and helpt me a lot !

[@ashman9425]

Oh great 😂 looks like I've got a job on tomorrow sorting my head unit out

[@katieskene1276]

Thanks so much, this video is awesome!

[@antoinepoirier7565]

Super vidéo, c'est bien expliqué et simple à faire 👌

[@kenrichardson8558]

Many thanks PJ much appreciated,

[@paulsmith4337]

OMG what a pain the ass this is, the stereo has packed in on my missus car, looks like a nightmare replacing it, great video though mate . Thanks for uploading.

[@PizzWisard]

Broke the control guide for the most right heating knob as I was putting it back in lmao be careful with that people, doesn't take a lot of force at all

[@PizzWisard]

Nevermind I just pulled out the other side. Probs should have watched the whole video before starting lmao

[@RioX666]

Thank you, I had the doubt if you had to cut with saw the plastic left over from the official embellisher, I see that YES

[@bensmith132]

Right so bare with. I’ve got a mk6 and currently the only option I’ve got when skipping a song, is to open my phone and change it while driving. Is there anything I can buy to essentially give me a ‘skip song’ button option to my car/radio??... (cheap)

[@csheridan7455]

You know what I'm just gonna get an fm transmitter aha

[@ivanbbb100]

Thanks i did this on ford fusion 2003 it is easy on him

[@drillix5943]

does the steering wheel controller still work?

[@herr_panzerfaust2514]

@@drillix5943 i did the same on my 2003 ford fusion. Sadly, the steering wheel control doesn´t work

[@padraiglynch6726]

Brilliant explanation thanks!

[@scruffykl]

Thank you very much for this guide! Followed it to the word and all went well. Was quite fiddly and took me about two hours, had difficulty keeping the green fan direction cable in whilst putting it all back together, but it finally came together. TO NOTE: When taking the original radio out, it was very difficult to pull it out due to the radio being clamped on a runner, not the case in this guide. I had to pull really hard and it sounded like I was breaking something but it was all fine in the end. QUESTION: How would I fit an additional system to get the steering wheel radio remote controls working with my new radio?

[@PJsprojects]

You would need this type of thing - www.ebay.co.uk/itm/Ford-Fiesta-2002-2005-Visteon-4500-Car-Stereo-Steering-Wheel-Control-Interface/302156934405?epid=1223662421&hash=item4659f4ed05:g:masAAOSwuMZZJCvr

[@TheTriko93]

Hi, Could you add the links of stuff mounted please? Great one, I think the best one on youtube about this model!

[@PJsprojects]

This seems to have everything you would need. www.ebay.co.uk/itm/Ford-Car-CD-Stereo-Radio-Facia-Fascia-Fitting-Kit-Adaptor-Surround-Plate-Panel/261709513516?fits=Model%3AFiesta+V%7CCars+Year%3A2006&hash=item3cef1a432c:g:v2MAAOSwyZ5Ul~ME

[@09mantlek]

very informative thank you :)

[@hal11121]

I need to replace the heater control unit (the blower blows out hot air on the number 4 but not on 1, 2, 3.) All works (temp selector and direction). Am assuming I follow your instructions on removing the dash etc till I get to the unit.

[@PJsprojects]

That sounds like the heater resistor pack is faulty,try this video - kzbin.info/www/bejne/f4GrqI2mh9Z6qpo

[@joehigham9306]

Amazing video cheers mate! 2 quick questions: 1. any recommendations on where to buy the new Dash part from so you can fit In a stereo? 2. Is it easier to just put an aux in than convert the whole thing?

[@joehigham9306]

I lied I have one more question - do the volume controls on the little indicator stick still work when you put in the new stereo?

[@nemonemo3129]

great video. thanks

[@ivanbbb100]

Is steering wheel controller for the Volume working after this?

[@Maxi0072007]

NO, it only works with original fabric mounted stereo.

[@simonbaker5200]

@@Maxi0072007 You sure? That's a bummer then. Kind of don't want to replace it now

[@Maxi0072007]

@@simonbaker5200 almost 100% sure if you want it to work with controller you need some kind of transfer that costs(only transfer) more than new stereo, thats all i know

[@miguelfaro6259]

This was so helpfull! Thank you

[@Lukas-jj6gz]

@PJsprojects Need some help here, I got the same same car and the same radio but when i turn the ignition on the radio does not power up. When I press the little button to throw out CD's I can here the throw out mechanism, so there is power at the radio, wy doesnt it turn on?

[@PJsprojects]

For a radio to not work it’s one of the following- 1. Red wire has no power 2. Yellow wire has no power 3. Black earth wire is not. Connecting to earth. 4. Faulty radio.

[@clkgenius]

Thanks man this was helpful!

[@MyBacon92]

@PJs projects can I pull out those knobs and put much better looking ones I found online? Have you tried this?

[@MelissaSmethurst]

Do you have to plug the new radio into a wiring adaptor or can you just plug it into the grey wiring cable with the pink cable you didn’t use as my radio didn’t come with a separate wiring adaptor

[@vjmacc]

Is there any way to add an AUX adapter to this radio? Fitting a regular stereo on this triple dash looks terrible.

[@carolineyoung5487]

And when my dad had a silver one with a crack in it when he was removing it, he was like why not go in right there van when I was removing the black one, so I can have it for easy work around that asking him some questions, and he said I’ll smash the radio, but he didn’t so do you have any ideas on what we can use to make it into a woman thank you

[@oliviaames8916]

Hello, will any radio the same size as the one you used, fit using all the same adaptors/ fascia you showed.

[@willward952]

Hi PJ's projects, can you please tell me if this is the same procedure for a 2006 Ford Fusion 1.4TDCI. It has the 4500 radio unit in, the same as your video, looks pretty similar if not identical to me, just in your video the car is a Fiesta not a Fusion. Many thanks.

[@PJsprojects]

Yep pretty much the same job.

[@christen8480]

Hey, loved the video, hope I’m not too late. I was wondering if the wiring loom adapter will work with any radio/head unit? Or the other way around?

[@PJsprojects]

@@christen8480 Yes pretty much all aftermarket radios use the same iso plug format now days.

[@ethancailleux9559]

Thank you!

[@wolfwerks2453]

Hey, did the steering wheel controls still work or not after the replacement?

[@PJsprojects]

Not without a steering control interface. Consult your retailer for this item.

[@nippz2831]

Can u explain what to do with the little pink extra wire on the iso adapter please does it matter or can I leave it loose

[@PJsprojects]

Leave it loose, not needed in This application

[@nippz2831]

@@PJsprojects cheers

[@cameronrichardson6123]

what are the parts used and where can i get them?.... radio fascia ect...

[@MRkurtdog1]

Would you say a double din radio would fit? Probably a stupid question but I'm not too sure weather to buy one or not

[@josephmarcalham9139]

My grandad has a Zetec model with the triple dash identical, i assume it works the same. He says he will give it to me when i can drive so that will be in 6 months or so, i just watched your tutorial and my goodness what a pain it looks like, not looking forward to it. Does it need to be the specific radio or is there others that also fit?

[@gheddylama5072]

Any chance to add on the serial stereo a cable aux?

[@wilsonprice5441]

Will this work with the latest touch screen double dinn Apple car play radios ?

[@Nordan166]

thank you very much for the tutorial ... the remote control (the one on the steering wheel) working ???

[@PJsprojects]

No,you would need a compatible aftermarket radio and a steering wheel control interface,available from Ebay,Amazon and most car shops.

[@charlenenysous5240]

or where do you find the cache adapter to put the new radio and the adapter to extend the power cable? Please

[@PJsprojects]

Try Ebay or Amazon. Example - www.ebay.co.uk/itm/Ford-Fusion-Fiesta-02-05-CD-Stereo-Fascia-Facia-Plate-Adaptor-Fitting-Kit/181596979935?fits=Model%3AFiesta+V%7CCars+Year%3A2009&hash=item2a480602df:g:nOEAAOSwowxdgSvS

[@matusmalina6104]

Hello, I think this is really helpful video but I have a question. Which adapter I need to JVC kd-x272bt radio, it is the same? Thank you

[@PJsprojects]

Yep same one.

[@matusmalina6104]

@@PJsprojects Thanks for answer. Could be this one? incartec.co.uk/product/Ford--Landrover-Freelander-Radio-ISO-lead

[@zacharyallen3575]

So I don't know much about cars. But what modifications will affect your insurance?

[@xuk_stance_meets5819]

How do you get air vents out fiesta mk6 pre face lift

[@colinjeffrey8787]

hi, you any good with throttle body solving, having some right probs at the mo, having difficulty in locating and matching the right part numbers, dashboard says eac fail...and ive got no power..do you know of any good sites to visit for help cheers regards

[@michaelroberts7044]

Great info there ,question for you,can you just take the cd unit out without all the screws dashboard clips etc ,I’m not bothered about damage to the dash

[@PJsprojects]

Afraid not, the mounting screws are hidden behind that large dash panel.

[@savvastamis7628]

Thanks

[@ByGabriGTX]

you can put the link to buy the adapter switch red to convert 1 in 2 switch ? i need it and i dont know what buy

[@PJsprojects]

Afraid I was trade so got everything in bulk. Would imagine any car shop, EBay or Amazon should have what your after 👍🏻

[@DukeNewcomb92]

Thanks so much for this video. I bought the same Autoleads adapter - could you clarify what the loose pink cable on the adapter is at 16:30? I've looked everywhere online but can't find an answer..

[@PJsprojects]

Don't worry the pink wire is not used in this application.

[@DukeNewcomb92]

@@PJsprojects Am installing a high end double DIN Pioneer unit into this car so wondering if used in that scenario - curious to know even if not used. Thanks!

[@tensor1129]

hi mate , where would you get the proper dash to replace the whole thing?

[@SandStormPower]

A total pain in the a$$ I wanted to put those big 2din android radios with camera and all that stuff... Now, I'm doubtful if I'll have that kind of patience 😂😅

[@alessandrociccarone3516]

Grazie mille!!!! 🥰

[@Axilleas92]

Good afternoon I also put a new radio but the buttons on the steering wheel for the radio do not work now

[@PJsprojects]

That’s normal without a steering control interface. These are available from car shops,EBay,Amazon or similar and normally cost around £30. Consult your retails for the correct one.

[@jonathanhunter2888]

Hi PJ .or anybody else with experience. I'm this . I'm having audio clipping on my pioneer deh1900ub( on radio ,aux or cd ) ,like popping sounds but only when the car is in motion after converting to the single din and using the right adapter . It also blew the 3 amp radio fuse the other day . What have I done wrong ? Bought the radio on FB marketplace .

[@Albanez39]

I'm going to disassemble the whole thing and connect a bluetooth amplifier module. Does anyone know which are the wires that connect the system to the speakers? I plan on cutting the front speaker wires and connecting them to my module, leaving the rear speakers for the radio (if I'll ever need it).

[@modisemolapo5343]

Please do the removal of those round air vents because to me they look different to all others models and i tried just pulling them out but with no luck ... im even thinking maybe the whole dashboard must come out...

[@PJsprojects]

For me to video the way to remove the vents I would of needed a car to come in needing that job doing and seeing as I’m now retired it might be best to buy a cheap Haynes manual from eBay. Sorry I couldn’t help further.

[@modisemolapo5343]

@@PJsprojects all the best in life and stay blessed 🙌.....your content really helps alot

[@ethan_59]

Will the radio control stalk under the indicator stalk still work or is there another adapter required?

[@PJsprojects]

You will need a stalk adapter that matches your new radio. Consult your retailer for the correct one.

[@kenrichardson8558]

Hi PJ your great Fiesta triple dash video helped me so much a year or so back and I just wondered if you have any idea what the problem could be here - not Fiesta related. I have a Sony CDX - GT 414 car radio CD player. It also has a front USB slot. For some reason it doesn’t seem to be recognising my Sony Walkman (NW - A3000) anymore. It just comes up with ERROR. Used to work fine with the advantage that you could read some of the unit’s text (now playing etc) but now it doesn’t. Any ideas - it does work OKif I use the headphone jack into the AUX source but obviously you don’t get the same functionality. Appreciate any thoughts and sorry didn’t know how I could contact you other than this way. Kind regards Ken.

[@PJsprojects]

Either a faulty USB cable or Walkman sort ware has updated and so is no longer compatible. Failing that the USB socket has a fault but that is very rare.