MK6 Fiesta Interior LED Conversion/Colour Change Tutorial | Switches and Controls | *HOW-TO*

In this video we're continuing with the interior LED conversion/colour change, last time I showed you how to make the Focus heater panel and now I'm showing you how to swap out the factory bulbs to LED/change the colour of the factory LEDs. I also show you how to illuminate your boot-pop button - something it seems like Ford planned to do, but never got round to.
If you want to order the same bulbs I used then follow the links and select the bulbs listed below from the dropdown lists in the eBay listings, then select the colour you want and the quantity (most come in packs of 10).
Heated Screen Button LEDs (PLCC-2/3528): www.ebay.co.uk...
You'll need 4 of these
Headlight Panel LEDs (3mm, constant, round top): www.ebay.co.uk...
You'll need 8 of these
Window Switch LEDs (3mm, flat top)
www.ebay.co.uk...
You'll need 3 of these
Boot-Pop Button LED (3mm, pre-wired, constant)
www.ebay.co.uk...
You'll need 1 of these
Oh and if you want to test your LEDs grab one of these battery holders, along with some 2032 batteries and a couple of bits of wire: www.ebay.co.uk...
If you don't fancy having a go yourself then check out Roger Andrew on Facebook, he does the full conversions in all colours and he can also do the focus heater panels. Drop him a message: / roger.andrew.188
I hope you found the video useful, let me know what you think in the comments!
Music Credits
------------------------------
Make Me Move (feat. Karra) (Tobu Remix)
Song: Culture Code - Make Me Move (feat. Karra) [Tobu Remix] | NCS Release
Music provided by NoCopyrightSounds
Watch: • Culture Code - Make Me...
Download/Stream: ncs.io/TobuRemixCr
#LEDconversion #FiestaMK6 #Interior

[@MendItModIt]

**DIGIAL CLOCK - where to buy** A lot of people ask about where to buy the digital clock from, mine came from a company called UNA Performance who are unfortunately no longer trading, however, I believe Trev Blu (Facebook) is now making and selling these so contact him if you are interested in one 👍🏻

[@vinomgm7498]

I dont have a car but I watch your videos!!!!

[@Dom-xr1vq]

Just a quick suggestion. Would it be a good idea to just buy the 'red' sony radio that's available for these mk6's? Not only is it already red but its also a more modern looking stereo rather than the Ford 6006

[@ObeseChess]

stumbled onto this while trying to figure out what, if any, options there were for the Mk7. I'm not sure what it's like in the UK, but in the US, the HVAC lights are teal green, the radio lights are white, and the gauge cluster is red and white - none of it matches and it's annoyed me since day one. I might feel brave enough to take this on now. Unfortunately it looks like everything in the Mk7 is a super tiny SMD.

[@wavyfxinfo]

I only went and done this for it to work but now the led lights won’t turn off there always on and me car beeps every time the door open. The dipped lights are always on as well and only go off on auto setting got no idea how to fix it now. So gotta buy a new one now.

[@robertbenney1440]

Been wanting to do this for a while but not wanted to pay out for it as I'm sure I could do it if shown. Hey presto, guess what next weeks got installed for me! LED BABY! Great tutorial, very jealous of the car, keep the videos rolling 👍🏻

[@yusufknowsit7674]

Keep your St mate.... Have a 1.4 mk6... These videos are 👌

[@yusufknowsit7674]

I have a 1.4*.. Its good seeing these mk6 channels still around on KZbin

[@its_just_fair_value]

Absolutely amazing mate. 👏 excellent video

[@MendItModIt]

Thank you mate 🙏🏻

[@ludvigdahlstrom3998]

Hello. How can I check what for diod I need too my car?

[@ObeseChess]

Alright, following up on my last comment - do you know the operating voltage of the LEDs you used? I'm about to tackle this in my Mk7 but all the SMD suppliers here want to know the operating voltage of the diodes (I see in the eBay listings that the forward voltage is 2.0-2.2v, but I guess that's different). I assume it's 12v since it's automotive, but want to make sure before I spend a bunch of money on diodes. Thanks again!

[@MendItModIt]

They won’t be 12v, 2.0-2.2v seems about right, there may be some variation depending on the type of led and possibly differences between colours but they should be around the 2-3v range. There are resistors on the PCB’s to lower the voltage appropriately for the LEDs. 12v will cook them instantly 😂

[@ObeseChess]

@@MendItModIt word, thanks. The low trim models of the mk7 Fiesta in the US have red LEDs on everything, but not everything is plug and play (the dimmer switch from a Fiesta Titanium causes a BCM error and all the dash lights to flicker on a Fiesta ST, or at least the one I got did) so I’m really having a hell of a time with all this since the resistors and voltages are all different.

[@liverpoolsaudits]

Do all these mods work on a mk5 fiesta?

[@nielsbouman1383]

Thank you for this in depth tutorial! I just order LEDs myself and going to try it. Can't wait for the vid on the radio and speedo coversion!!

[@jackwigley37]

When are you planning on doing the speedo?

[@martynroberts780]

Really useful video! Will definitely be doing it myself now thanks

[@BragmansWorld]

Great content! But pro-tip: look at the camera lens when filming yourself, not at yourself on the screen. ;-)

[@swiftyrs2354]

nice …got it done at last pal , look spot on …those thumbs look familiar on the boot popper 😂😂😂

[@stephenziemelis3579]

Hi Mate can you please send me the light bulb numbers thank you

[@andrewhowell2682]

Have you got a link for the LEDs buddy - cheers

[@michaelbancarz73]

Hi where did you find your digital clock switch

[@stephenlalhriatpuia92]

My man you are very talented man

[@MendItModIt]

Thank you mate 🙏🏻

[@stephenlalhriatpuia92]

@@MendItModIt I have a same issue with my ecoboost ecosport but we don’t have mechanic that knows how to fix… have to change the whole engine

[@andrewhowell2682]

Hi buddy, just done the boot popper mod and joined to the wires you stated but led won’t light up. Does the ignition have to be on or should it just work with the sidelight switched on. Cheers

[@DriveTimeWithMe]

Mine was then stopped working needs a new one the led on these ain’t the best

[@gav2011]

What number are the twist bulbs behind the heater controls? Thanks

[@MendItModIt]

They’re in the description to the video where I made the heater panel bud 👍🏻

[@mpaoulo]

How to remove the knobs?

[@macktattoo87]

Nice bro

[@evanpudsey369]

Nice good job

[@ashb9319]

Can anyone just do this for me? Lmao or does a company offer this ££££???

[@MendItModIt]

In the description bro

[@ashb9319]

@@MendItModIt appreciate it bud, didn’t see it at the bottom 👌🏼✌🏼

[@MendItModIt]

@@ashb9319 no worries mate, Roger’s a good lad, he’ll sort you out 👌🏻

[@gav2011]

Where did you get the flux pen/brush?

[@MendItModIt]

I got it from work bud, if you check out my latest video on doing the LED swap on the radio I left a link to a disposable one on there 👍🏻

[@CdotPoppy]

Cool stuff!

[@joelinden1579]

Nice vid Mike 😂

[@relax-rt2qi]

What’s the digital clock thing

[@MendItModIt]

Exactly that mate, but it also has 2 temperature sensors and can display battered voltage + a few other functions, there’s a video all about it on my channel 👍🏻 not sure of where I got them from still operate but I believe there is someone else on Facebook now supplying them, might be worth a post on there to ask who does them if you’re interested

[@dominikbahniczek4274]

Mate are you on Facebook aswell?

[@MendItModIt]

Not for the car no