Great comparison! I’ve never quite seen spray paints applied like that. It’s always best not to stop and start on the actual thing you’re painting to avoid speckling and spluttering from the aerosol can. Nice smooth sweeping motions stopping and starting when the can is not over the figure is the recommended
@adrianjamesdeguzman56343 жыл бұрын
Just a reminder, dont spray on a rainy or cold weather, the figure might get the so called "frosting" it'll destroy the figure and it can't hardly be undone.
@hewlett260 Жыл бұрын
Two coats of high gloss and reapply the matt to fix frost.
@hughhoney23453 жыл бұрын
Better to disassemble the figure then let dry in room temp. Best result is 2 coats of Mr. Hobby Premium Matte or Gloss.
@lazergator10163 жыл бұрын
Feel wise tamiya is smoother but I just usually go for Mr Hobby Mr super clear flat uv but I haven't tried Mr hobby premium topcoat but as much these topcoats are nice I still highly recommend Mr Hobby Mr super clear flat uv cut.
@GaGav2512 күн бұрын
Do these clear sprays give us a polished touch on the surface? I'd like to have a smooth surface for my lego technic super cars
@Cinderkin3 жыл бұрын
LET'S GO!!!!!!!!!! That Ryu Theme was perfect haha Bro - Holy crap you'd made that Pac-Man look INCREDIBLE
@ricleo803 жыл бұрын
Please do a long term review as well. I noticed the matte top coats sometimes turn shiny over time especially on softer plastics like marvel legends and some of the softer shf parts that are flexible.
@cahyandoong2690 Жыл бұрын
hi, can u tell me how to undo the coat ? Because i think i have a not equally part , it looks like a crack coat ,
@Yomamaveryphat9 ай бұрын
Wash it with water?
@meetprakasit14474 ай бұрын
If you scratch normally, it won't really damage the figure, but if you dig your nail into it, it will damage the figure, right?
@kakarotto2762 жыл бұрын
I applied the Mr. Hobby Premium Top Coat on my SH Figuarts Awakening Goku's face plate and It seems to have made the plastic get a strong sheen to it. It doesn't look matte at all. Did I apply too strong a coat or does it just need time to dry?
@dstar012 жыл бұрын
Depending on how much you put it will look wet. Give it time to dry and next time do a light coat
@JohnCranberry232 жыл бұрын
Will it harm decals? I just applied 100 decals on the Millennium Falcon and someone told me that TS-80 may harm the decals. Any idea?
@dstar012 жыл бұрын
Don't cake it on and you should be good
@giottoa.48162 жыл бұрын
How long do I have to shake the can of the Mr Hobby Premium Top Coat flat before spraying?
@_brghtz7 ай бұрын
When I bought any figs, it was normal, but later on my nose and body, these green stains kept appearing and I couldn't wipe them off.Do u have solutions 😢
@Frambhueee Жыл бұрын
Hi, any of those 2 coats can resist the hands sweats when you play with the figures?
@MidNightKamisama Жыл бұрын
Any news?
@raven06962 жыл бұрын
Is there a specific type of paint that Tamiya TS80 might not go well with and ruin the paint? I've got a bootleg figure. It's good an all. I just want to make it look better with a matte finish. Thanks.
@thefractalcactus7 ай бұрын
I know it's been 2 Yeats lol, but the premium topcoat from Mr. Hobby is an acrylic and the Tamiya is a lacquer. Be careful using lacquers because they are very caustic and will melt and peel lots of paints.
@LordJerimiah2 жыл бұрын
I've read that I need to use topcoat gloss before I do panel line using tamiya accent liner. Which of the two should I use if I'm just planning to panel line my gundam kits, without additional painting?
@dstar012 жыл бұрын
Top coat matte would be a better choice
@LordJerimiah2 жыл бұрын
@@dstar01 confirming if layers should be Plastic > top coat matte > Tamiya accent panel line?
@gubabaclips2 жыл бұрын
Tamiya accent color damages bandai plastic, you need to put a protective layer over the plastic. Gloss coat is best for panel lining since it allows paint flow. After you panel line you can go for any finish you want
@Panda_man.. Жыл бұрын
@@gubabaclips How many coats of the gloss coat would you recommend applying before lining the panels? And should I wait for the gloss coat to dry before applying the panel liner, or immediately do it after I sprayed the gloss coat?
@beerdragon45832 ай бұрын
@@Panda_man..2-3 thin coats. Wait at least an hour to dry.
@christisrisen67744 ай бұрын
I have a question if i use LIQUID chrome pen on a toy sword can i use the tamya clear after it dries thanks
@dstar014 ай бұрын
yes
@troloinkto Жыл бұрын
does this work on softer plastic? I want to top coat the BOTW Link figure from Jakks, but some parts like the hair and the tunic have soft plastic parts
@ketchupl19798 ай бұрын
Hello I have question my scale figure matte top coat its gone and it very small area that have problem I want to fix it but I found only can spray so can I spray it on q-tip first then sweep it at the place I want to fix? or its there other option?
@alphaphgames82663 жыл бұрын
Does mr hobby top coat premium turn yellowish and does it turn the plastic yellowish if in display for gunpla
@dstar013 жыл бұрын
No
@alphaphgames82663 жыл бұрын
@@dstar01 so it's perfectly safe to use mr hobby premium and it will not turn the plastic or itself yellowish. Thank you
@alphaphgames82663 жыл бұрын
Also does it damage the decals and stickers
@sweetpataterz87382 жыл бұрын
Hey, I know I’m kinda late to this video but I got a big question. I’m new to the collecting business and I collect SH Figuarts Dragon Ball toys. Both matte finishes look amazing, but I don’t display my figures, I make stop motion animations. So I wanted to ask if, since you have to pose the figure over and over again, if that might rub the matte off.
@joshuaalay2295 Жыл бұрын
100% will rub off
@e0are Жыл бұрын
How do these look today??
@abigailaguilar34383 жыл бұрын
hey dstar i have a 2.0 cell saga vegeta that got ran over, its in great condition just some scratches and only the chest armor straps are actually broken, do you think you can fix it
@dstar013 жыл бұрын
My commissions are closed until further notice
@TheMonkeyman-s9u3 жыл бұрын
Hey when can I get the koken goku
@isaiahpullella3132 жыл бұрын
How are they with protecting the paint ? Any recommendations for keeping paint from scraping or rubbing off ? Looking for something for my custom figure
@dstar012 жыл бұрын
They are good but the absolute best is a 2 part set from here: www.splash-paints.com/product-page/2k-ultra-matte-clear
@isaiahpullella3132 жыл бұрын
@@dstar01 trying to see if you’ve reviewed this before ? Have you used this personally ?
@dstar012 жыл бұрын
Yes I use this stuff personally
@markb75952 жыл бұрын
Paint chip on a custom is about bonding, not sealing.
@isaiahpullella3132 жыл бұрын
@@markb7595 oh really !? For sure so using primer then ?
@biospider3.0682 жыл бұрын
Hey DSTAR do you recommend these for custom repaints a person has done on marvel legends, etc? I just repainted the dino thunder white from the lightning collection by hasbro and im looking for something to keep in the black and white really well on him. Thanks in advance and great vid!🙏🏼🔥
@joshtheo.g.94663 жыл бұрын
Hmmmm i wonder what happens if you spray a figure with both
@kayakids51853 жыл бұрын
Hey Dexter is the tamiya top coat in the Description meant for plastic?
@dstar013 жыл бұрын
Yes. Can honestly be used with almost anything
@kayakids51853 жыл бұрын
@@dstar01 thanks Dexter appreciate it
@lazergator10163 жыл бұрын
@@kayakids5185 Mr Hobby and Tamiya are great spray cans but if you have the extra budget try looking for Mr Hobby Mr Super clear Flat UV cut it's bit pricey but definitely worth it.
@kayakids51853 жыл бұрын
@@lazergator1016 okay thanks bro
@lazergator10163 жыл бұрын
@@kayakids5185 No problem man
@Riky3661352 жыл бұрын
I didn't think it'd make a difference but I can see it now. Fantastic video. 👍
@johndoe367bell Жыл бұрын
Can I ask if tamiya flat clear coat is ok with resin?
@beerdragon45832 ай бұрын
Yes absolutely. I only use Tamiya and it’s great stuff.
@Lucky17Ай бұрын
Can u help me i need cover my head goku black sdcc paint peil just little bit but its hurt my hear can u help me choose paint what i need usel
@Leilight8 сағат бұрын
7.30 that's what i thought lol , Thanks sir this is so nice information.
@myleshancock91643 жыл бұрын
Thank you Dexter, fantastic tutorial. Omg your "complaining fan" voice had me in STITCHES man 🤣👍
@dragunmotion26083 жыл бұрын
Pac-Man looks incredible with that finish
@nimblebimble3 жыл бұрын
Not sure if this is an unpopular opinion, but I used Krylon Matte Finish-extremely cheap and accessible in the US/carried at Walmart-and found it to be really comparable to these just using an extra coat or two.
@joseasencio69003 жыл бұрын
Best intro 🙅♂️🧢
@ChullLoopa3 жыл бұрын
Tamiya wins due to price availability and it just looks more matte than mr.hobby unless you didn't spray thoroughly on FP goku otherwise clear winner is very noticeable
@ChullLoopa3 жыл бұрын
Also i think for these kind of reviews youd have to use the same figs since you cant see that fp goku had an equal amount of scratches as df black
@kenttorres71013 жыл бұрын
can u fix the sh figuarts saiyan raised on earth bootleg
@kaioken6543 жыл бұрын
Awesome, black goku looks way better
@hanafihashim21383 жыл бұрын
I’ve tried the Premium Topcoat Flat Matte finish on my Goku, but it seems like after it dries, the texture of the figure kinda a bit hard compared to the original texture. Is it normal?
@dstar013 жыл бұрын
Normal. That texture is essentially to protect it
@chuunico8 ай бұрын
The Tamiya TS80 is usually out of stock lmao. Guess I'll resort to the premium paint.
@jonathangarza16563 жыл бұрын
Its even more durable after you let the top coats cure. I would wait at least 2 days.
@Spider-Criminal3 жыл бұрын
D star always helping out the collectors👍
@HOoes961 Жыл бұрын
Is bosny flat clear good for matt finishing action figures?
@Quakecon-s9r3 жыл бұрын
Did you spray it on the rubbery skirt piece of Black too? it looks pretty glossy
@markb75952 жыл бұрын
That's going to tack out. Don't spray solvents on vinyl. Airbrush only
@the_cheese_bandit.15413 жыл бұрын
I hope that the sh figuarts clone goku has a mat finish
@Triiplesiix4 ай бұрын
Why would you touch it at all lol get some blue tac and put him on a plate
@5150Figures3 жыл бұрын
How would I intentionally take off the top coat? Would water or soap work?
@voltage3d4693 жыл бұрын
ok groovy gonna give Tamiya a go.
@livespideys19323 жыл бұрын
Its probably just me but i read it figure fight friday lol
@PixelKappa_HD3 жыл бұрын
So are these better than the Mr.Super Clear Flat stuff? I'm trying to get my super7 turtles stuff not so shiny so im ordering a solution and I didn't know if it made a big difference since these products all seem to do the same thing
@funschool3331 Жыл бұрын
An I crazy, or are you saying 6 inches and then spraying from a foot away
@stevenmazanet99335 ай бұрын
vs rustoleum?
@beerdragon45832 ай бұрын
Do NOT use rustoleum. You get what you pay for and rustoleum is cheap crap.
@bozzy79463 жыл бұрын
I think the Tamiya actually looks better! Have you done any videos on adding joints to figures? like say a basic figure with no ankle then adding an ankle joint?
@dstar013 жыл бұрын
I have not
@yiagtkms2d2 жыл бұрын
This is what I need, thank you!!
@jamesflanagan73742 ай бұрын
Dude get some blue tacos and stick em down to old medication jars or anything else u can spin. Touching them at all is madness.
@geeksquad48843 жыл бұрын
Plz make dragon star Jiren and hit look like sh figuarts plz
@liammatthews17013 жыл бұрын
Just get the SHF
@ayatokamisato80173 жыл бұрын
Great video 👍
@-brady70324 ай бұрын
You got a FLAT table😂
@deszaras33 жыл бұрын
Great video man
@michaelvaldez59933 жыл бұрын
Guess I'm gonna be doing this to all of my figures. Tamiya Color just shot up in price haha.
@carlosaponte13313 жыл бұрын
GREAT REVIEW
@carlosaponte13313 жыл бұрын
Good job man
@3rdstrikeryu1023 жыл бұрын
🤣🤣🤣🤣 that Ryu intro!
@-brady70324 ай бұрын
That’s a totally wrong way to spray paint😂
@heeroyuy8093 жыл бұрын
This help much!
@filipzietek51463 жыл бұрын
I found that Mr Hobby atracts dust much more than Tamiya
@imeldasalas74083 жыл бұрын
Love your videos
@DemonFromSun3 жыл бұрын
Glad I already bought a bunch of Tamiya paints.
@5150Figures3 жыл бұрын
You're really making me want to get some top coat now Dstar, haha!
@5150Figures3 жыл бұрын
Oh yeah one question, is it easy to paint over top coat?
@dstar013 жыл бұрын
Yes
@Didum_Bumboo3 жыл бұрын
I ordered 2 Mr Hobby premium top coat flat from Japan. £20 😊
@tnvasion78243 жыл бұрын
🤟🏾🤟🏾🤟🏾
@davidmarvericksleftnostril8223 жыл бұрын
Wow incredible results love how abomination goku looks and also what is your new job just curious
@junglejim993 жыл бұрын
Car paint sprayer down at the garage 😄
@Bottron300003 жыл бұрын
Day 4 of asking dstar01 to review figma call of duty figma ruin