FiiDO Q1s YYK Build | Part 2

FiiDO Q1s YYK Build | Part 2

[@nub340]

Very clean! Love how you hid the controller IN the down tube and deleted the bag in the middle! Proportions look way more balanced. Some really nice shots cruising around too!! 🤘

[@NiteJerk]

That thing looks awesome. I kinda' wish I'd've bought one but I got a Razor Rambler instead because of availability.

[@casainho]

Very nice and good detail video, thank you!! Looks very good your Fiido Q1S build!!

[@antonypartali]

Very good work my friend!!👏 The only thing I'm afraid is the controller... I don't see any holes for cooling it and with one controller in summer or uphill it will raise the temperature..! The good with these controllers, haves temperature sensor and you can see it in the app (to your phone) with speedometer... Anyway, waiting for the next upgrade with 2 motors..😈🚀😁 From Greece with love and Respect!!!!🙏

[@kennethonate3408]

The seat post were he place the controller is heat sink material it absorbs the heat came from controller

[@adfunkedesign]

The controller is not vented...it is sealed for waterproofing! So yea the 120amp version of the controller I think has a fan. This is the 80amp controller.

[@antonypartali]

@@adfunkedesign No YYK Controller has a fan... Maybe you say from other companies controllers... Also YYK don't have 120a controller (50a-80a-100a-150a) and voltage 48-72 or 60-120 Controllers with fans are very big to fit in so small airia that fiido has...

[@Ahxiang99]

@@antonypartali theres a 250a variant but got discontinued

[@norrielcelario5374]

The political commentaries are amazing 😂

[@Sicilian49]

If only this fantastic vehicle can be mount by two people, haha.

[@khairjavaad8378]

Used to have a $6000 plus fiido last time. And also with Cateye Volt6000 which cost $1,100. But due to our government seeing this thing dont bring them profit from public transportation, they came up with all kinds of rules and law for personal mobility devices. Luckily i sold my fiido at a good price.

[@aminuddinaiman5488]

fiido back in sg wont even cost $6k LOL. at most the highest was 2k or 3k with gemini before but with alr HIGH AH BATTERY AND motor + controller and many exclusive stuff and rare stuff. stop capping

[@je7647]

im lucky where I live just can tell them I dont care and theres nothing they can do if they want to argue about it

[@thermodynamics1110]

@@aminuddinaiman5488 thank you. i figured they were overvaluing the price just so they can sell it around there

[@burn1gotbeats]

Nice build I love these little thangs 😎.

[@deemstars]

Singapore isn't communist LMAO

[@AhjanKamikazee]

Singapore is literally 2nd north korea. Being controlled for every single thing we do

[@HAN-cm5ci]

very good

[@mikewormsman]

Do you have a link for the dual imput motor and yyk controller

[@liftsomniac_adunp1346]

Where can i get a custom battery bag for batteries? You know a site here in the us that does custom battery bags?

[@adfunkedesign]

You should be able to find some on Amazon but more sizes on AliExpress. Custom ones are made in Singapore if you need something real specific/

[@mariosallusti6873]

👍👍

[@MelskyBragger]

Hey Mike, what color combination you made for phase wires and hall sensor?

[@electricbike2062]

The frame will break near the steering column 120%

[@VietPho]

Can someone confirm?

[@electricbike2062]

@@VietPho I've already seen a video on KZbin about this bike frame, and it broke, well, I'm like a novice engineer, and at the beginning of the video I immediately realized that it would break near the steering column, and indeed, it happened at the end of the video. And secondly, you can ask an experienced welder where the weak spot on your frame is, I think he will say the same thing.

[@VietPho]

@@electricbike2062 what small pocket bike do you recommend for conversion or upgrade?

[@electricbike2062]

@@VietPho You need to contact an experienced welder and ask him to make you a solid frame according to your dimensions specified in the wish list, and the aluminum pipe should have a wall of 3 mm and about 30 mm outside, and for the rear fork, a pipe wall with a thickness of 4 mm ... And see how the manufacturer strengthens the steering part of the DH bike frame, and ask the welder to also use amplifiers for your frame

[@adfunkedesign]

Yes they have been known to break. Might be stress related but more likely from crashes related to insufficient breaking or even more likely poor break maintenance

[@natetheaxebattles2898]

Can you please share where to purchase the Fiido frame? I have been looking all over for a source. There are a couple places to buy the entire complete bike. However, the stock battery and motors are low end and weak. Thank you and nicd bike!

[@martinpanjr839]

hi sir where we can order this dual crown suspension i need the same gold color i always saw the black which very common

[@rodmorrison47]

Um, Singapore has a centre-right government with a left-wing party in opposition. In the UK (where our govt is further to the right than most of us are really comfortable with) Singapore would be considered right-wing.

[@adfunkedesign]

They outlawed scooters/ So they're obviously definitely communists 😉

[@JohnArby]

Awesome build! What kind of tape did you use to wrap up your controller?

[@adfunkedesign]

kapton tape high temperature

[@ruslanvassa6076]

Well done, mate! Also trying to fit my yyk in the battery compartment, but it won’t fit :( Mind sharing what were you soldering?

[@adfunkedesign]

Sometimes you need to shave down the YYK board a little . Also you sometimes need to shave down welds inside the box / that can be hard.

[@adfunkedesign]

Some of the connections looked a little off so I was just cleaning up the connections on the back of the controller

[@kevanfishes7553]

yyk 50a and 80a fits into the seat post 100a requires some shaving 150a cant fit

[@uhsleep_cr6155]

Hey @Mike Matzke , wondering if you are selling this

[@JaybeezyOG_tv]

what led strips did you use?

[@e-speed5857]

Bagus sekali, anda menggunakan dinamo berapa watt untuk fiido ini

[@pok2go]

what tires are those shinkos? do they fit without any adjustments?

[@davidchoy4915]

Yo buddy, I love the way you said " COMMUNIST GOVERNMENT " ! LOLOL! Agreed indeed!

[@orbit5887]

Any links for the lights on your frame?

[@kennethonate3408]

I saw in your video you use a soldering iron, what you do basically

[@adfunkedesign]

Some of the soldering didn't look correct..just cleaned it up.

[@benpok]

May i know how did u get the back suspension done?

[@adfunkedesign]

165mm shock

[@aimanamran850]

hi may i ask where did u get those lights?

[@xxsyrzz2149]

hi where did u get those lights?

[@ReVolt_e-Vlogs]

Hey buddy, I just bought a Fiido Q1S to modify, this is my 2nd Fiido, also have the Fiido Beast e-scooter/e go cart, so you can say I'm brand loyal! 😂👍 What do you recommend to spend the first $500 I'm going in invest in it? Thanks man, also where'd you get those LED lights, they're super bright!!!

[@adfunkedesign]

the led is rope neon 12v its thick and bright. I also have a double up on the middle section with a conduit / the first anything is rubber grip covers / oil disc breaks / break install kit / signals / active breaks / gps tracker / lock / bright headlight

[@darrell301]

till for sale

[@teachercheung]

60V battery + controller. which controller is this? do you have a spec table?

[@adfunkedesign]

this is a yyk 50a 3000w

[@eatadick6969]

@@adfunkedesign what is the controller's voltage?

[@adfunkedesign]

@@eatadick6969 it will take 90v ... It's only 50amp / They have 120amp

[@charlyrivera2562]

Amigo por favor comparte la apk del controlador yuyangKing

[@ZOMBuckaCurt]

Did you sell it?

[@sunnymoon369]

How do you get those lights on the frame?

[@adfunkedesign]

Waterproof double sided tape for LEDs

[@sunnymoon369]

@@adfunkedesign thanks

[@mariosallusti6873]

ce ne son pas des roue de 12 pouce !!!

[@ratpiss]

Has this sold? Send me a message.

[@gassave]

Where is part 1?

[@adfunkedesign]

kzbin.info/www/bejne/pJbdgqOVnZx1lbc

[@raduionescu9765]

SPEECH THOUGHT AND BEHAVIOR CALCULATED EXACTLY AS WRITTEN IN THE 10 DIVINE LAWS AND THE HOLY TRUTH IN THE BIBLE LEADS US TO VALUABLE RELATIONSHIPS IN ALL REGARDS.