Everything Wrong with the NEW BeamNG car

[@MilkMad]

I cannot believe you missed the fact that the brake booster is on the wrong side of the car on left hand drive versions lol

[@fillman86]

OHMYGOD! how did I miss that!!

[@valdebob_val]

@@fillman86 haha

[@FantaMedSocker]

But he did comment on the fact that there isn't a clutch cylinder, even though clutch cables exist and were used in the 90s

[@fillman86]

@@FantaMedSocker clutch cables at that time were only used on incredibly cheap cars, not this kind of car

[@aaaabababa]

@@fillman86 that is incredibly incorrect, there still were many mid range cars that still had clutch cables back in the 90s. my 1995 Saab 900 still has one, so did my previous 1999 Citroen XM, which was an upper middle class car and even the Ford Mustang still used a clutch cable until at least 2004. btw. my 130hp saab also has headers, and a BMW of the 90s also has real turbular headers, so that is not all that uncommon either.

[@JackRuss311]

this should be a series for every time a new car gets added to the game

[@fillman86]

haha I'm glad you liked it

[@gp8666]

100%

[@jwalster9412]

Beam ng devs will start complaining in the change logs about it to lol.

[@lawree374]

And "onevia" variant of 240sx was sold in US officially , so it makes sense that we have more onevia bx in the game

[@fillman86]

oh, I keep forgetting america exists and that you guys are strange

[@lawree374]

@@fillman86 I'm from Europe, mate 😶

[@fillman86]

@@lawree374 ah, well I won't hold that against you ;)

[@tnc7399]

​@@fillman86other countries love to do stuff in America, then stop doing it and then call America weird for keeping the same thing (I'm not bothered, just find it funny how that works)

[@thomasliptak9469]

@@fillman86 How do you forget the giant land mass that makes up the US

[@Brick873]

i love the fact that he went in trying to shit on the car, and then found almost nothing. good job beamng devs!

[@fillman86]

hahaha

[@Agsotro]

The urge to rework the whole interior to be pristinely correct fighting against my complete inability to even fathom what code is as a concept let alone do it

[@ShadowedCross]

@@tbhnothanksbro Maybe the video was made public too soon and was hidden before being made public again? Not sure if that changes the publishing time or keeps it.

[@kenji642]

​​@@ShadowedCross members usually get access to videos early, so itd release for them first, and then to the public

[@ShadowedCross]

@@kenji642 Ahh that makes sense.

[@Agsotro]

@@tbhnothanksbro Filman Coded time travel into my DNA Jbeam

[@ILOVEsnickers15]

THE INTERCOOLER IS TOO BIG THIS GAME IS LITERALLY UNPLAYABLE🤬🤬🤬😡😡😡

[@fillman86]

basically lol

[@UND3RD0NE]

I like how that is considered huge have u seen the stock inter cooler from a 940 turbo that thing is as big as the normal radiator Google It

[@myacidninjatheamazing1025]

Fixed "LITERALLY UNPLAYABLE™" Intercooler on the 200bx being too large

[@EvanG529]

The only thing wrong with it IMO is the lack of widebody bumpers. None of the stock bumpers line up with the widebody flares and it makes it look awkward.

[@AZEOforreal]

That’s kinda realistic to the 240/180 bc aftermarket was so mass produced that the mods and body kits were so mediocre in quality you would not get lineups.

[@ryzenpeak]

@@AZEOforreal but theres really good kits now ive seen insanely clean widebodies even if they were custom should atleast be a option in the game🤷‍♂

[@AZEOforreal]

@@ryzenpeak maybe… They still didn’t get the manual transmission right in this update tho

[@AZEOforreal]

for the semi’s

[@dalehadley3283]

To be fair,a lot of the things you point out, could have been done a bit better,and yes the "Oh they did it to keep the poly count low" argument,is valid,but at the same time,the Classic Engine Expansion Pack has way more detail and it doesn't seem to hinder the game whatsoever

[@Ferrari255GTO]

It depends on what hardware you have, i personally have a decent computer, but a few years ago i didn't and i remember how some mods could lag my whole PC just by themselves

[@fillman86]

yeah, automation cars seem to run fine with about 10x the polygons lol

[@volcano.mitchell]

​@@fillman86maybe they're lazy

[@superlavahair1536]

@@fillman86 all the polygons are in the engine itself. the cars export with the pistons and camshaft in the engine which increases poly count

[@HarryLikesLambos]

I love the new engine sound for the new BX (using the high performance exhaust and the 4 cylinders)

[@Bread01.]

Yeah its beautyful

[@jwalster9412]

It sounds really fast, even if its slow when you set it up right.

[@maxypoo4652]

As much as I appreciate the work of beamng devs, I would love for you to do this with all cars

[@Ferrari255GTO]

The devs know we like them it's fine

[@fillman86]

I don't want to poo all over them, so I may save it for new updated cars

[@DonJohnson-qr1lk]

I noticed the lack of a fuel cap today lmao. I was at one of the in game gas stations and wanted to go on the right side of the car, and realized there wasnt one

[@SpeedHero]

Top tip! "One Via" was actually fairly common as all USDM S13 coupes came factory with pop ups. The Silvia nose was never sold in the US, or Canada, so all S13's regardless of hatch or coupe, were pop up.

[@strtomato19]

You missed that there's no engine accessories like pulleys and such in the front of the engine

[@jwalster9412]

I hope that they add more to it in patches, they already added some derby parts that weren't there before.

[@wilk2809privat]

16:40 Older cars often indicate with the hose from the fuel pump where the fuel cap is. I can send you a picture from my 1989 Suzuki SJ 413. It doesn’t have the arrow either.

[@limitetpancake]

i wanted to say the exact same thing, i also remember alot of cars my parents owned didnt have the arrow but just the pump with the hose in either direction

[@fillman86]

oh that's interesting, I didn't know that

[@Freezorgium]

​@@limitetpancake so wait, if the hose is on the right side in the picture, does that mean the filler cap is on the right side, or the left?

[@limitetpancake]

@@Freezorgium its made so it looks like the gas station your are pulling up to. so if the tube is on the right side, your fuel-cap will be on the left. and wise versa

[@kosomies]

@@limitetpancake My tube is on the right and my fuel cap is on the right. 2002 V70

[@nicolasalemanbuendia4206]

8:00 to be fair some engines like the E series from toyota used only 2 bolts to hold the valve cover

[@chips7049]

17:51 thats actualy intentional by the devs. some drift cars actualy have flipped liveries

[@chips7049]

nvm he mentioned it

[@Zhawn7]

By why tho? (Drift cars having flipped liveries)

[@shorty______]

​@@Zhawn7it's said that someone making a livery for his car was having issues making it look cool on the other side and just said fuck it and everyone liked the result

[@sbeve6969]

​@@shorty______ I heard that it was like that so you can see the sponsors correctly in a reflective surface like a mirror

[@shorty______]

@@sbeve6969 naaah, that's the case for an ambulance but not for drift cars. You never get to see a drift car on a mirror hahaha.

[@nickbirminghamem1168]

The s13 coupe had pop up lights in the north American market

[@fillman86]

same with every s13 180sx

[@skinnyjeanis7177]

If fillman overanalyzes the engine bay of the BX of all things this hard, for the love of GOD don't let him look into the sunburst's bay, he will have a stroke and literally die (also a sidenote, the BX uses the covet's engine models. i don't really agree with the practice but it allows for some cross-compatibility when you go modding it... in this case ITBs shouldn't be an issue)

[@fillman86]

the nissan silvia and nissan pulsar shared the SR20DE engine, so it's not that bad. It also turns out that the 3D models for the BX already had the itb setup, they're just not used for some reason

[@nukkuuu]

@@fillman86 then do some coding and get it ingame

[@thundercrowz]

The onevia is actually really common in the US as we only got 240sx’s so no s13 front end and you could get them in a hatch, coupe, and convertible.

[@App2099]

Average pricing?

[@thundercrowz]

@@App2099 5-8k

[@App2099]

@@thundercrowz thats not bad actually

[@thundercrowz]

@@App2099 most Americans love the hatch so the coupe is not as popular and is therefore cheaper most of the time and of course everyone hates on the vert because they never made a fiberglass hardtop for it.

[@App2099]

@@thundercrowz personally i prefer the hatchback aswell but id be more than satisfied if i could get a coupe instead, i just really love the general look of the car

[@showbizcec4985]

You should make more videos like this-I found this pretty entertaining. It does make me wish the devs did put a little more thought into some of the mechanical details of some of their cars. One thing that bothers me for no good reason is there’s a variant of the covet that says it has a special livery when it doesn’t. The livery is in the game files but for what ever reason the devs don’t use it even though they say they do.

[@fillman86]

that's an odd one

[@mvdesigncustomworks5460]

want one more? the brake master cilinder is on the same side on both hand drive versions

[@pigeondriver8992]

Steelorse already noticed the polygons in the trunk lmao (He also mentioned that it looks like it's not the same guy that made the T-series remake and the BX; it seems like the guy who made the bx had lower expectations instead of making a perfect vehicle like the T-series) Anyway I hope they fix it I was also disappointed about the intake filters; we previously had a great covet remaster where you could not only choose which intake but also change the filter!

[@jwalster9412]

I think alot of there focus right now is on the career. Which, fun fact, of you doa. Cop chase mission and the suspect hits a traffic vehicle, you get a Lua error.

[@pigeondriver8992]

@@jwalster9412 Ik for the cop chase, had to restart the career mode lol

[@DrPizzle]

They need to make the door nodes stronger, the door flops around when you open it also, just so you know, the mirrored livery is actually on purpose, asked the devs about it

[@eeagle69]

ITB's intake is hidden in the dae files btw

[@octopuscardoor]

I can't even drive the new BX, Fill, it yeets me off the road faster than a hot pocket cooks in a furnace. Of course, this might be because I'm just bad at driving.

[@Ocymber]

no it’s the car

[@TheRogueAdventurers]

Weird, I find it to be the easiest car to drive now

[@Ferrari255GTO]

​@@TheRogueAdventurers i don't have my replacement wheel yet but i felt like it was easyer to drive with a controller too

[@xXxXENcoreXxXx]

It's really hard to drive on the steering wheel.

[@memorimusic420]

No, as a certified 1400 hour+ player i can assure you its THE CAR

[@nickbirminghamem1168]

I don't think you're being "nitpicky" at all. In my opinion, the 200bx rework seems really half assed. And for the mirrored livery that's actually really popular in Japan for symmetry reasons.

[@Ferrari255GTO]

They're doing other stuff in between along with a whole ass new graphics engine wich needs EXTENSIVE polishing, once Vulkan is fully ready things are going to change A LOT.

[@fillman86]

yeah, I clarified seconds later :P

[@nickbirminghamem1168]

@fillman86 Yeah, ik I jumped the gun a little with that comment, but I was also explaining why they do it. Nonetheless, I love the videos. Keep up the good work.

[@SockyNoob]

​@@Ferrari255GTO tire and aero model should be their main priority honestly.

[@madeinryan]

To be fair some 90's cars had huge intercoolers from factory, the e36 325 TDS for example(ignore the 1.3 bar turbo)

[@drift_works]

probably the new 200bx version could be my fav car in the game ahaha, i really like the style of the s13

[@DracoSilverscar]

One thing I'm not surprised you've missed is that if you set the front wheel offset as far out as you can the steering explodes when you turn.

[@jwalster9412]

Why would you need that lol?

[@Incommensurabilities]

@@jwalster9412 steering is quite important for driving ;)

[@jaihadgeppo150]

i mean i guess that would happen if you put 20cm spacers on?

[@DracoSilverscar]

@@jwalster9412 i was attempting to use a set of rims that I ended up abandoning for bolide rims on all four corners with the widebody kit.

[@DracoSilverscar]

@@jaihadgeppo150 nah. Shouldn't affect your steering parts much, just your wheel bearings.

[@ItsNova816]

One issue I found that has to do with the actual driving characteristics is a missing/broken node in the rear suspension. The rear toe rods aren't attached to the subframe and wiggle around freely.

[@fillman86]

odd I didn't notice anything like that. I'll keep an eye out

[@Batteer]

I honestly was expecting this video to be a total joke, but these are some very valid criticisms. While it doesn't really make me not appreciate this rework, after the amount of complexity and accuracy on the Belasco Diesel motor for the T-series, I'm very surprised by this quality. This looks like what you might find under the hood of a newer gta v car

[@michael-m9kb]

It’s one of my favorite recent updates

[@Vinraymi]

everything wrong that I could find before watching the video: -weird polygons inside the trunk -ugly textures (worse than usual) -low-poly seats (even though the ones IRL are flat and boring cloth, these in-game look much worse) that's about it ig

[@Mojojosie86]

Gonna join you in Nitpickington.. Those are T bolt clamps, not V bands :P

[@fillman86]

I thought they weren't exactly v-band, but no amount of googling was able to help. Thanks for the clarification :)

[@letsdrive_53]

As someone who has read 0.32.1 patch notes I know that the livery is supposed to be mirrored.

[@policedriver]

I love this game but something that pisses me off is the buttons in the car not working like the hazard light button. (I love realism)

[@zat-1-fury]

The only thing I don’t like about it is the fact they removed the under glow lights it doesn’t make sense especially for this type of car 😢

[@zat-1-fury]

Also they removed the power glow livery I can cope with that but the under glow lights are a little too much 😅

[@GrumpyIan]

The dumpster fire part had me laughing.

[@fillman86]

:D I'm glad one of you commented on it

[@Riley8425]

they said in the patchnotes for the hotfix, that the drift car variant having a mirrored livery was on purpose because its apparently a thing in the Japanese drift scene

[@zigenstern]

if you put in the V8 and put on the turbo manifold, the top of the intake manifold has weird physics as the engine rocks side to side, like if you hit the throttle

[@HansSouth]

Your mods are actually good as extensions

[@fillman86]

I think they're fun, but rarely deserving of the 5 stars that they get lol

[@HansSouth]

@@fillman86 I think It can be better if you fill up those information about cars

[@clockwork3494]

3:45 While the Sil80 wasn't initially made by Nissan as it's origins were from mountain racing and the stock pop up 180SX front end being more expensive to replace than that of the fixed headlight S13, Nissan did officially (albeit briefly) make and sell a select few models that were officially given a "Sileighty" badge in place of the typical 180SX badging on the car's B pillar. Kind of cool that Nissan back then just went "This was not my intention, but I shall adjust accordingly." lol

[@Galaxy_CMC]

Votes for him to make a modern pickup. (Like a ETK 800 with a bed or a Cherrier with a bed or even a Roamer with a bed):

[@Ken-BurnForever]

Don't bite the hand that feeds you

[@fillman86]

true, but they already don't like me :P

[@FIRAT980]

17:05 ford pinto flashbacks (cute death machine)

[@Adriethyl]

The BX shares its engine models with the Covet, which is weird because the Covet _does_ have an ITB setup available.

[@fillman86]

yeah, and the models for the itb were in the files for the BX too lol

[@SpaceGood.]

If you post this video under the 0.32 discussion thread, they might take a look at the video and fix some of the issues. I’m also pretty nit-picky and I did not realize all these small issues at first.

[@teplonosia420]

have you seen the rear suspension links? they dont move correctly.

[@bratwurstgamer223]

Omg! i didn't seen theese engine bay fails!

[@fillman86]

well the valve cover and throttle body are the easy ones to note, everything else is quite small

[@Vermilleno]

I will say this - devs likely had reasons for all of these innacuracies, but one reason could be that they simply didn't know. Lack of knowledge is a good reason sometimes. When I draw, I tend to sometimes not grasp how something has to be drawn and I do it my way. Great video, man.

[@fillman86]

I bet they do, but were given time restrictions, and were told just to add detail. That approach is fine, it doesn't actually change anything, it just gave me a small video idea

[@Nomad_za]

This video is so funny. I get that you are angry, but you show your anger in such a comedic way.

[@fillman86]

lol I'm not angry, I'm just having a big of tongue in cheek fun

[@nickcanada3687]

The line off the master cylinder is to pump brake fluid into your intake of course! 😂😂😂

[@fillman86]

lol could you imagine a manual fuel pump that you pumped with your feet?

[@TommyCrosby]

Bro needed a missing arrow on the dash to remember that the car didn't have a fuel filler.

[@fillman86]

since I've never driven a car to the point of running out of fuel (this has nothing to do with my driving skills....), so it's easy to forget

[@unlimitedfactory4297]

The mirrored livery is intentional, not an issue

[@mahuba2553]

2:43 hatchback? thought this was a coupe

[@ClassicRides13]

One thing I noticed is the entire engine bay and exhaust have been mirrored compared to the 240sx, which might be because the engine looks backwards from the real life KA24 and SR20

[@PowerBuxoK]

literally unplayable™

[@fillman86]

lol

[@poklianon]

i just noticed that the covet has THE EXACT SAME engine model (for DOHC I4)

[@fillman86]

yeah, even the SR20 ended up in the Nissan Pulsar... though that was a performance variant, not the standard engine

[@t3cht098]

8:03 funny engough in the TU engine (very popular french engine from the 2000's) there is only 2 valve cover bolt and it work

[@SimDrifterShadow]

Better have an update than nothing I guess

[@wilk2809privat]

The only thing wrong with the new BX is that they didn’t take this perfect opportunity to include a Wankel engine. I need my rapidly flailing dorito. Mainly because the mod i used to get a rotory engine in the BX doesn’t work with the new update. 😔

[@fillman86]

you can get the old BX as a mod, and all old mods will work with it I believe

[@shorty______]

​@@fillman86that's why they decided to rename the platform, so all the old mods get dumped but if you really want them you can get the "coupe" back and use them

[@3drakaina]

Do this as a series with all the vehicles with the occasional update when cars get updated int he future.

[@fillman86]

I'm thinking I might

[@Da_Osta]

I've found another issue: If you have a look at the "Street Tuned (M)" version you will see that there is a selector for an Auto in the center console despite it being a manual.

[@Ferrari255GTO]

The drag version doesn't have a lightweight backlight either, just regular glass

[@Bread01.]

They fixt it in the hotfix

[@LXIShorts]

This is actually so fun to watch, i want to see this with every new car in the game because seeing these little things is so funny

[@3cups920]

The navigator mounts are too weak so it bounces around a lot and occasionally falls

[@howlerhtm]

Though the engine looks like a ca18 it is really more like a ka24 which does in fact use a distributor. Also, one thing that bugs me about the rework you didn't mention is the rear hatch has no hinges or struts. it just magically opens.

[@Rey-vm9it]

actually, not every car has an arrow showing where the fuel filler is.

[@Y_Beam]

also the engine is not animated the pully's don't turn like the D series engine!

[@fillman86]

yeah, but that engine has a fan to animate, so having the fan rotate but nothing else would be weird

[@DarrenBoxhall]

The canister the brake vacuum line goes to is a vacuum storage unit. Helps maintain vacuum after rapid brake applications. The line in the intake tube that should go to the ecu, is the intake air temp sensor. Why it goes to the booster.... Lol

[@fillman86]

I think I I knew of it, but never pieced it together

[@kurohanaflowers]

onevias were the standard for coupes in america. if you had a coupe 240sx off of the lot, it was a onevia or a vert.

[@fillman86]

yeah america's very strange and insular

[@lucasmatheusdasilva5714]

About the flipped livery: japanese people say this was done to "line up" the livery with the car. Some logos would totally ruin the design of the whole livery when put on the other side. The JZX90 @18:55 is the perfect exemple of that. Imagine the big writing on the side flipped. It would not line-up. Not the case in Beamng though as the logos are symmetrical

[@ryzenpeak]

The fuel tank indicator thing isn't always true while most cars have em i've also seen quite a few that don't, but having no fuel filler at all was funny😂

[@deerbidk5542]

The decal mirroring at 18:30 is actually by design, as this style was common on Formula Drift cars in the 2000's Check out the Top Secret Silvia S15 for reference

[@fillman86]

yeah I noticed it seconds later :P

[@SUPRAMIKE18]

I have seen a coolant line from a radiator to a brake booster before, but that was on a time attack car, they had a water jacket around the brake booster for cooling the brake fluid.

[@fillman86]

oh yeah, you'll get that on heavier time attack cars with lots of power, but not enough money for the super expensive brakes. They do some really odd things sometimes

[@myacidninjatheamazing1025]

that thing the vacuum line looks to go to is a vacuum pump. some engines that are higher power (or diesels) didnt produce vacuum(diesels) or not enough in the case with high power engine applications which makes sense on the higher end versions like the drag or drift but not a base model

[@xymaryai8283]

missed opportunity to do a cinemasins type counter

[@fillman86]

oh lol maybe one day

[@myacidninjatheamazing1025]

the wire clamps like the one at 6:12 is ALL OVER my geo tracker (im hoping for one to be added to the game please someone) because the vehicle cost 10k new and is basically a slightly more powerful highway kei truck

[@christopherf9700]

Your mods are the best. The only complaint I've ever had is the bug ute doesn't have a tow hitch, that's literally it. Thanks fore all the hard work

[@ZetaVec]

On the v8 config the intakes for the turbos clip into the battery

[@fillman86]

yeah there was a bunch of missed things, next time I'll try to be a little more thorough

[@Snazzyhaz420]

19:06 it’s the same for GTA online, there’s a lot of livery’s that are correct in one side and mirrored on the other side

[@fillman86]

nah I just goofed, and talk about it seconds later :P

[@brettjames5061]

the logos being mirrored for the drift car is intentional, some irl drift cars are like that. The beamng logo on the car is likely representing a motorsport number plate which irl cant be mirrored because they dont allow that usually. I think the same goes for the sponsors on the plate.

[@jakeflynn5379]

V band clamp? Pretty sure that's just a SupaT exhaust clamp

[@fillman86]

you're right that it's not a v-band, but it seems that they go by many different names, and none are needed for intakes like that

[@AdaBow10]

I think this is a neat idea for a video! A new vehicle or rework/remaster of an existing vehicle is released and you try to look for things that are wrong with it. I'd love to see more in the future 👍

[@skynet1.044]

I love this type of nerding out, this is what I subscribed for!

[@StarFroggo]

I love that the new bx looks like if Honda made a budget s13.

[@Avetho]

I always laugh about the Pinto and the Corvair since both cars' problems over time have been so overblown by culture, the Pinto didn't explode in a crash and the Corvair didn't just fold and go flipping across the road, and in fact the Pinto would've had no problems at all if the then-standard steel gas tanks were replaced by the safer polypropylene ones that the Pinto was in fact a big factor in the invention of, and the Corvair's suspension folding issues were solved under a year after the first was sold, but Ralph Nader already destroyed the reputation of the car by then since he was hunting for a car to blame and the Corvair unluckily ended up in his crosshairs. Car history is interesting

[@BrooksMoses]

Yup. And the first-gen Mustang had a similar sort of bad design with the fuel tank. They're not _quite_ as close to the rear bumper, but they are "drop-in" tanks that form the trunk floor, and the wall between the trunk and car interior is just particleboard, so the gas tank is basically in the cabin as far as fire safety is concerned. And yet almost nobody ever talks about that. I do like that movie clip that he showed for the Pinto, though; it makes it clear just how silly the popular conception is.

[@stuntezofficial]

imagine being the dev that modeled this and coming home after a hard day to watch your favourite youtuber, only to find this video.

[@throwout1483]

You forgot one vital thing. On regular frame BXs (NOT the tubular frame like the drift/race cars have), the NA 4.5L V8 and 5.5L V8’s intake clips through the battery.

[@GewelReal]

My car doesn't have the arrow on the fuel gauge

[@fillman86]

it seems the convention of doing that came in patchy in the 80s/90s some people have said that the orientation of the picture of the fuel bowser can indicate the side too

[@tilen3266]

i feel like if we ever get ATGs engine sim into beamNG they will do more detailing to the engine bay

[@fillman86]

oh man that'd be wild! I don't believe that's what they're doing though, but instead a half measure because they don't need the whole thing, just better simulation

[@tilen3266]

@@fillman86 true. Intergration is in atgs plan that he showed at the end of one of his videos. Ofc he didnt have any specific ideas on how it would be intergrated but yeah. Still would be cool

[@camboi6103]

we had the best rework and the worst rework back to back either the 240SX was done by different team or the devs were burnt out from the T-series

[@t.waithe246]

Lol me being a mechanic for 15yrs 😂they f'd up really reallyx2 bad. Good looking out on this epic failure.

[@fillman86]

lol

[@little_kopy]

just a game little baby

[@Joe_Nutsy]

If you install the V8 in a factory BX the air filter clips massively with the Battery.

[@szynga]

So there was an update and they apparently "fixed some issues in the engine bay". I was wondering if you're going to make a follow-up video where you check out whether they fixed the issues or not :D

[@fillman86]

Wait, they fixed it? lol that wasn’t the point of the video, but I just might

[@ThePower1037]

I love ITBs, thanks.

[@AlexRib]

8:9 Honda B-Series and H-Series come to mind imediately

[@usenobrake]

Whats sad is we waited 2 months for this

[@fillman86]

it's not that bad, I was just having a bit of fun for a video

[@BillyZeKat]

the fuel arrow isn't present on every cars. To know the side of your car the fuel cap is: Just look on which side of your dash the fuel jauge is. if the fuel level is left of rpm/speed -> your cap is on left side; on the right of rpm/speed -> right side of your car.

[@petlemons]

There were no production Onevias and Sileighties as far as I am aware. A japanese tuner supposedly was building an official sileighty that was intended to be a productioin vehicle, but they only built one.

[@fillman86]

turns out the onevia was quite common in north america. The sil80 was a joint effort with a tunner and I think they made only 500 official ones

[@petlemons]

@@fillman86 Well now I feel stupid! I've just realized the 240SX is basically the Onevia. Never really put two an two together. It was actually the only S chassis that was sold in Canada (and probably the US as well, but who cares about them). You could only get them with the KA24, and if you were lucky, you could find one with the KA24DE.

[@yaboi3370]

in north America A 240sx Coupe came with the pop ups on the coupe.

[@myacidninjatheamazing1025]

BTW you missed the fact that I dont think theres even a COIL for the plugs on the damn thing