2400w Stainless Steel VSD Pump Review

The BWD12-40 gets quite loud at higher loads so we left the sound un edited to convey the true sound of the pump.
Here is a link to the pump for more information:
www.filtershop.co.za/bwd12-40...
Timestamps:
(00:00) - About The Pump
(00:47) - 2 Bar
(03:46) - 2.5 Bar
(05:30) - 3 Bar
(07:20) - 3.5 Bar
(09:21) - 4 Bar
(11:22) - 4.5 Bar
(13:35) - 5 Bar
(15:25) - 5.5 Bar
(16:57) - 6 Bar
(18:20) - 6.5 Bar
(19:46) - 7 Bar
(20:40) - Conclusion
BWD12-40 Description
Experience unmatched efficiency and control in liquid transfer with the BWD Variable Speed Drive Booster Pump. Engineered to deliver superior performance and reliability, this cutting-edge pump is a game-changer in various applications including water supply, irrigation, and industrial processes.
Featuring advanced variable speed drive technology, the BWD Booster Pump allows seamless adjustment of flow rates, ensuring precise delivery tailored to your specific requirements. Whether you're faced with fluctuating demand or varying operating conditions, this pump adapts effortlessly, optimizing energy consumption and maximizing cost savings.
Built to last, the BWD Booster Pump boasts robust construction and high-quality materials, guaranteeing durability and longevity even in demanding environments. Its innovative design incorporates intelligent monitoring and protection features, safeguarding against potential faults and extending the pump's lifespan.
Experience peace of mind knowing that your liquid transfer needs are in capable hands with the BWD Variable Speed Drive Booster Pump. Trust in its reliability, efficiency, and precision to elevate your operations to new heights of performance. Explore the possibilities and unlock unparalleled fluid handling with this exceptional pump from AQS Liquid Transfer Solutions.
Features & Benefits
Easy To Operate
Low Noise Levels
Auto Start/Stop Function
Energy Efficient (Up to 80% more energy efficient compared to traditional pump systems)
Restart Delay (Built-in 3 sec delay to protect the motor from overheating from continuous on/off switching)
Auto Rotation (Built-in timer automatically starts the pump within a pre-selected cycle to rotate the bearings)
Constant Pressure (A pressure transducer ensures constant pressure is maintained even when multiple water outlets are used at once)
Class Leading Efficiency Integrated functions to protect from i. Dry Run ii. Over-Current iii. Over/Under Voltage iv. Overload v. Abnormal Pressure
Important To Note
The pump must be earthed.
All maintenance should be carried out with the power supply disconnected.
Do not put a strain on the electrical cable.
Only use the pump with clean water in the system.
Read the instructions carefully before adjusting any settings.
Extending the cable might affect the factory warranty. Rather use an approved extension cable.
Install the pump in a cool ventilated area away from direct sunlight, rain, and spray from the irrigation system.
Pumping muddy (or other suspended solids)water through the pump severely reduces the life expectancy of the pump.
The pump is equipped with a draining screw at the bottom of the discharge casing, we advise draining the unit when temperatures are below 0 degrees Celsius.
Operating instructions
Ensure the power supply cable is connected correctly.
The suction & discharge piping should be rigid and be able to withstand up to 6 bar, be air-tight on the suction side & watertight on the discharge side.
Follow priming instructions as shown in the diagrams.
The pump is designed to use a 230V single-phase power supply. keep voltage variants within 10% up or down. Any further will damage the motor.

[@botsle]

Will be acquiring one of these pumps real soon

[@FilterShopZa]

If you need higher flow it really is a very nice pump

[@botsle]

Great video

[@FilterShopZa]

Thanks