FINAL BUILD & FIRST LIFT! LESU ALL-METAL HYDRAULIC FORKLIFT PT5 | RC ADVENTURES

Well the BEST was certainly saved for last, including an error in the Instructions that made for a curious amount of work and a puzzle for me to solve. Thankfully, Im sure this video will prompt LESU to change the page in the instructions. For the viewer - you will have to watch the video to find out! EPIC. I can't say enough good things about this model forklift. Yes, I had to put some extra thought into this build.. but I think that is part of the appeal for me. Today I demonstrate how to install the electronics, channel Mixing - tank priming and troubleshooting hydraulics, final assembly, and the very FIRST LIFT!! I AM SO STOKED FOR THIS !!!
This model is about $1000.00 USD depending on where you find them.. so they are a heavy price for a seemingly heavy machine. Time and use will tell if they are worth the money. So, Ill put it to work as soon as I am done building...
For more information about LESU products visit their Facebook page here: / lesurcchina
CHECK OUT THIS USA LESU Distributor! semijoerctruck...
SUBSCRiBE & “Ring the Bell" ► bit.ly/JOovvU
"1 Million Views Club": bit.ly/2AYVrAF
RCSPARKS Shirts & MERCH: shop.spreadshi...
RC ADVENTURES™/ RCSparks Studio™ © 2019 Medic Media Productions Inc. All rights reserved. Publication, reproduction or distribution of this film by any means whatsoever - including without limitation electronic transmission via internet or e-mail, or re-uploading existing videos & re-uploading such material on any website anywhere in the world - is strictly prohibited without the prior written consent of Medic Media Productions Inc.

[@TheRealRCSparks]

WELL THAT WAS FANTASTIC!

[@CustomCrawlerz]

Great addition to the Loading Wars Equipment.

[@briankennedy7040]

Medic I'm so I'm pressed with your knowledge of hydraulics....I'm curious is it just from the RC or from heavy equipment

[@mrmadmike427]

World first Diesel powered hydraulic forklift ...... must use the can for the penalty .... and safety is the 21 priority ...

[@Swartz_DuckWhisperer]

RCSparks Studio I wood comment on vid but their are 69 comments

[@troymanning198]

RCSparks Studio this is a excellent edition to the new loading wars, I do have a question tho will the arena for loading wars change due to new trucks and a new forklift?

[@Nytstlker]

I absolutely love that you showed us the setup on the controller. I actually wish you did it more often

[@kristinewilson5353]

Nothing u do will cost u viewers. Your fan base is dedicated. We love you bro!

[@rookie101_]

Oh man !! I can’t wait to try this out !

[@ackelvis6976]

😂😆 u gonna get a chance with all the penalties you get

[@dancearoundtheworld5360]

so this is limited on lifting capacity due to weak hydraulics or can you lift more like in real life were you put more weight on the rear end ?

[@aydanangus]

9:32 I'm still watching but my brain has melted just like in an advanced Math class.

[@340jd]

You and me both

[@gksilverking1615]

Same

[@itchyprince3793]

I’m watching right now and I am extremely confused

[@rockinrc4146]

Safety is the 21st priority. Love it Medic

[@chiccorocker]

Safety is number 21 priority sir! Thank you showing the mixing of the radio. I never used that function so far and I always wondered what's it like. Bad luck with the light controller, but it still looks great. Fix her up and she will be gorgeous. The problem with hydraulics is that it's difficult to test. You have to kind of trust the instructions. You can eventually use compressed air for tests, but it's not easy to hook up an air compressor and it must not be strong or the lines would just blow up.

[@yellowironcowboyrccon7484]

Safety is 21st. Priority! That fork truck is absolutely fantastic! Loading wars! Looking forward to the show. Yellow iron cowboy....

[@aljensen7779]

I learned something today about mixing. I've done it often enough but never realized I could set up more than one mix combination at a time. So I learned something today and it's only 9am. Thanks, Aaron!

[@warrenbarrett3374]

Safety is our 21'st rule. But that forklift is so smooth in action. Like the build.

[@billyraike644]

Very helpful with the mixing! Always gets my brain scrambled

[@mauricioiii3153]

Spilling the beer should be added as a fireable offense !!

[@JOHNJ0HN9111]

yes if it was open... in Aaron's case i sure he was just using it for demonstration purposes only.... but not a bad idea... they use there own open beer they are drinking or a fresh opened can...

[@TechnicBlakbird]

Thanks so much for showing how the mix works. Super helpful.

[@danon-theautisticmaker8112]

Lol, running a fork lift. Would never have considered an RC fork lift as fun till watching loading wars. Great build Medic! & yes of course I watched the all the way through, even the part programming the controller.

[@NordicRC]

Loved the mix info! Keep it coming! A real treat for us who have never tried it.

[@NordicRC]

Not sure I understood it completely though ☺️😅

[@michaelhoyle2665]

Safety is 21st priority! Glad you got it all sorted out. Looking forward to seeing it join the loading wars vids.

[@TheRealRCSparks]

Already POSTED! Enjoy :)

[@mannychen2154]

Awesome Forklift!! I’m a forklift driver myself and I’m impressed!!

[@ejs6097]

Thank goodness safety is the 21st priority on this channel. It leaves the first 20 priorities open to doing perfect builds like this 1! : ) The finished product is beautiful! Mind blown! Great little build series Medic!

[@mikeirwin6182]

So freakin cool medic. And safety is 21 on the list lol

[@cmoore7689]

Heck ya. Now that's cool. Keep on keeping on

[@Stickies72]

Great build, this is an absolute work of art done by Lesu. Looks beautiful and works great. Great job on figuring out that thing, Great Video!!! 👍👍👍👍

[@matty2helpfull]

The mixing for me is like gibberish. Safety is a 21st priority in both loading wars and youtube gold. And i love this build or any build for that matter

[@TheRealRCSparks]

Mixing is easy. You have the MASTER (which is the movement you are looking for - ie: Mast UP or Down (channel 3) ] and Mix it with a SLAVE (Pump.. channel 6). Ask the Mast to go up.. the Pump will Turn on. the POS and NEG of the setting.. is How FAR to the Left or Right.. the servo is travelling.

[@amondavis]

Yes I am following along all the way to the end on every single video that you put out I'd love stuff like this that is hydraulically done

[@blackwolfrc]

I was here all the way to the end. You made me go get a kit to build. And I must say building, filming and editing 🤯. Bluemoon love that beer 🍺

[@1breematt]

Fantastic stuff. On the full size Linde unit the control for the mast is move the control stick right, that raises the forks up. Left is forks down. Forward is tilt mast forward etc

[@DeAnnWoods100]

Very much enjoying this build . Thanks for explaining how to make the mixing work

[@benzhogs]

Very helpful showing us the mixing part .

[@bamorun8038]

21 of course. Penaly !!! Great Building. I hope we can find those chains as separate parts soon enough, I would have so much use on some buildings.

[@BraxxJuventa]

Great build again Aaron! Thanks for sharing this with us. 👍😁

[@nwhuckin7761]

Holy crap, that sound card is amazing! pretty cool little lift

[@RCTanksTrucks247]

Awesome piece of machinery brother! Glad you got it all sorted in the end. Lifts that can like its nothing. Glad to see you still using the pallets 👍😊

[@TheRealRCSparks]

THANK YOU FOR THE PALLETS!!

[@RCTanksTrucks247]

@@TheRealRCSparks Most welcome brother 😊👍

[@pnwRC.]

I loved the explanation of the mixing!

[@Symuality]

Appreciate the mix stuff! I don't own any RC stuff yet but your content will be a huge resource to me one day and I can't wait! I binge on the semis, loading wars, KZbin Gold, etc! Definitely my favorite content of yours!

[@mtman2699]

love the how to mix portion. thanks for a great build series.

[@deanwahlstrom1993]

I don't know if you still read old videos,but it was very helpful and yes add them in to new videos

[@rossgross7497]

nice build !!! safety 21st priority . cant wait to see it in full action !

[@sophie28ize]

GREAT BUILD!!! So impressed how you figured everything out and got it to work. Thanks so much Sharing!!! Please keep the mixing part in next time. We need to learn that. I know i do..LOL

[@dmvideos6637]

Always learn so much watching your build videos thank you

[@JOHNJ0HN9111]

that's a win win on lifting the blue moon... CHEERS!!!

[@dereknadolney4196]

I watch the entire video, explaining channel mixes is interesting to me.

[@hhtrichard]

Thank you for the detail on setting up the RC controller. Not sure I managed to follow the first time, easier the second.

[@jasonwilliams74]

Still watching!! Wouldn’t miss a second! Glad it’s not for kids!

[@jeffmilliard178]

Safety is the 21st rule.... great vid...

[@NordicRC]

Loved seeing it all finished up. Will be great with lights. Yeah, totally different capabilities than the Carson (though I like that one too, for what it is). Waiting for a reveal of a second Lesu some day ... for the Wars 😉

[@5tbadger]

Wow wat a build ,, respect to the patient’s an skills!!

[@Jamieclarke88]

Hell yes bring on loading wars 👍👍👍👍 nice job on the build thanks for the video🤘🤘🤘

[@lmgkllrpro0077]

Try plugging the light board into the sound unit. It could be set so that the lights turn on when the vehicle engine turns on

[@glob3trollerx]

This forklift is just amazing. Maybe one day i can build something like this too. Great work.

[@Sven_Hein]

Safety is always the no. 21 priority.

[@mynameisntleo]

I personally find watching someone programming a rc controller is fascinating. If you lost any viewers from disinterest, it certainly wasn't me. Awesome content Medic 👍

[@hesitat3]

Finally a beer i know and enjoy 👍 awesome build series, can't wait to see it in action

[@codyshepherd6379]

What an awesome build. Keep on building brother.

[@naimeabdelnour6101]

I never had to program any kind of mixing before but watching you do it gave me the confidence to know I can do it. Great video, amazing content, go team Canada. 👍🇨🇦

[@tylerneff2465]

I love this rc, it's the coolest it's almost exactly the same as a real one except it would be perfect if the carriage moved side to side as well. Great Hobby!

[@ChrisWard01]

I'm finally catching up on the videos. I can't believe i waited so long to start watching lol. Definitely entertaining

[@PhilipCockram]

Mix Master . Awesome to see it all come together and working . This is going to really improve Loading Wars.

[@fordmud]

A little tip for getting the air bled without having to run the machine, is to use one of those hand vacuum pumps. I don't know if it will work as well on rc hydraulics, but basically fill the reservoir close to full, put the vacuum hose with a alittle suction cup over the fill hole and put a vacuum on it while opening and closing the valves, then you add some more fluid and repeat till the fluid level quits dropping. Hopefully that makes sense. Edit, I use the clear hose and put vacuum on it just till the fluid starts to come up the hose so I can watch the air bubbles coming up.

[@hillninjasadventures5169]

This build is so awesome and definitely not for kids

[@sarahbaker2342]

Safety is our 21st priority!

[@Velcro_Ninja]

Very helpful with the mixing. Thanks !

[@Sean-gd9wo]

Great build. You should by a second one. The 2 of them would look class together

[@danielcampbell3686]

Looks fantastic, it's funny how a nights sleep often leads to problem fixing

[@Slikx666]

Now that you've finished it I will say I like the colour scheme. It looks great.

[@ELRAYMAKERSOLDADURA]

wonderful !!! Thanks !!!

[@sherxiong957]

It's great to see these kinds of videos. I know some of your videos help me doing my mix

[@InTheDogHouse3DPrinting]

You will need to put the vent screw back onto the tank. When you are running it, the oil will warm up and expand. It can build up too much pressure and start blowing the lines off. They put those on there for a reason. I'm glad you were able to get the kinks worked out on the lines, and get it to working properly.

[@TheRealRCSparks]

Correct.., but in the instructions.. its shows the screw. The breather hole is needed though

[@corabbring8198]

What a great build. And what a power! Oh yes I watched the whole video, although I could not follow you at the mixing. But that’s my lack of experience with such radio’s. I’m not in the RC hobby very long. But I love it and I’m learning every day.

[@SwampersRC]

Safety is priority number 21! Thanks for the mixing demo!

[@scottledin8210]

This may seem dumb because the hydraulic systems on a real loader or forklift are much different in there design, but the hydraulic tank needs a breather on them. The expansion and contraction of the oil may be causing cavitation in your pump causing the hydraulics to not be smooth. It may be causing an air lock in the system. This is an AWESOME build! I would love to see more builds like this and the excavator. Maybe a truck of some sort!!! Keep them coming!

[@tazz37kraze]

I really like your reviews and shows they are very refreshing and I also do like to go out to ride my RC’s, build, and watch all of ur channels, keep up the good videos I’m soaking them up like a sponge does water. ;) you are my RC idol :)

[@Houleigan]

Watched the whole video! That is awesome machine. Looking forward to seeing it in action on LOADING WARS!!!

[@blakewickman935]

Yes i am still waching keep up th great work

[@PhilBender612]

I enjoyed your mixing explanation. I don't have much experience with mixing or even exponential so I enjoyed seeing that.

[@TheRealRCSparks]

Expo is easy, as long as you think of it as - adding MORE input, before the machine does the action. IE: More Expo on Throttle .. means More Input from the trigger, before the machine moves

[@PhilBender612]

@@TheRealRCSparks ahh. That's simple to understand. Thanks Medic!

[@dlaw1954]

Just a tip, but you should level or even point your forks downward when removing a load from them, it allows you to more easily see how the load is fairing as you've set it, and also makes adjustments easier, as all you need to do is tilt your forks back again to lift the load enough to move it slightly.

[@tomloftus6534]

Fantastic build, thank you!

[@dirtbikeboy66]

This stuff is so entertaining. I have followed the entire build and the final product is insane dude. I cant believe how smooth it is and the amount of power it has. Now you need to make some videos of the hardest lifts and moves you can think of in a obstacle course and test your friends with time attack challenges. And I cant wait for Sunday to come bring on the loading war guys.

[@seanhanley947]

You would think that with Lesu being a major name in the rc hydraulic world they would take a little extra time with the instruction manual and get it right. especially with a kit costing well over $1,000. Still fun watching.

[@DaBurt42O]

Loved the episode as always and the part on mixing was very informative and straightforward 🤟 glad we have you to help explain and take the fear away of alot of these things. #rcsparksforever

[@northcountryrctoolbox9583]

Awesome man. Thanks so much for making these videos. I see a lot of diverse Rc vehicles in your videos. You keep me watching. Thanks from all of us at North Country Rc ToolBox. Herkimer NY

[@nghttrn001]

Awesome build! Love the scale hydraulics

[@loganlawrencefarms8356]

Safety is the number 21 priority

[@ericbrooks1562]

Great build,thanks for sharing. 👍

[@alwheeler8302]

9:25, still watching, setting up the controller and mixxing type of stuff is always interesting. Almost should be a seperate playlist so that infomation can be easier.

[@connork5339]

Safety is priority 21. Same reason the operator is not wearing a seat belt or wearing a high vis vest.

[@Evan_Moore61]

Connor K It must be a mini Krazy Joe then. 😂

[@tyflesh]

hey where's the safety glasses on the mini Krazy Joe!!! Penalty!!! lol

[@markcargill1185]

Safety is our 21st priority!!

[@greglarson6137]

Great explanation on mixing.. I was trying to set up the RC4wd 4200XL that way and was only getting it to work in one direction... Didn't know it was because of the 3 position switch. Thank you for that.. Cant wait for this Sundays Loading Wars!...

[@ao1645]

This is a masterpiece!!!!!!!!!

[@markjackson7600]

21 boys, well done keep the content coming from sunny South Africa 🌍

[@FlatlineBob]

Awesome channel! One of my Favs! 9:20 Still Watching. Understand what you are doing with the settings and the controls but didn't follow your process because I was trying to think how you were going to drive the RC with what controls. At 10:30 you started to show the debugging. As a pro programmer that also teaches HS students robotics, ppl understand better if you explain one setting at a time and show the RC working the one setting before going onto the next. It may seem like talking newbi speak, but since your goal is to help newbies and pros alike, then you have speak both. Especially for complicated builds. Love the explanation about 2 ESCs and the debugging. Try a dental tool or other small pointing tool that is not black for pointing at these small items instead of a finger (unless you don't want to keep looking for yet another tool when trying to film/build at the same time). Dental tool is also useful for the getting servo pins out of the black connectors. Safety 3rd...er wrong vids. Safety priority 21st! Looking forward to enjoying all your vids!

[@007qantas]

Greetings from sunny Western Australia. Thanks for the great build video, it`s going to be a big help when mine turns up in the mail. Believe it or not I picked one up on ebay auction new for only US $685 including shipping. Sale of the century I thought. It`s going to complement my Tamiya trucks beautifully. And having an actual hydraulic model will be so cool.

[@satorrotas]

Excellent construction, the result is really perfect, some problems with the editing but quickly resolved, maybe they would have that Lesu another sort of notice more detailed. The final test was very good, excellent fluidity for this super Forklift !! And a Penalty to remember for a next video 😄 Very good job !!

[@zetswae]

I love your new forklift it is very powerful quiet it's nice and your safety priority is 20 first priority I think

[@ryanraisanen]

Safety is the number 21st priority.

[@Evan_Moore61]

Safety is our #21 priority! Stay unsafe at the warehouse and the mine guys!

[@optimusdude]

Oh man cant wait to try out that sweet machine.

[@rookie101_]

Sluicebox Steve It’s going to be a race to get the first penalty !

[@optimusdude]

@@rookie101_ I won't be in that race rookie. I am sick and staying home

[@TheRealRCSparks]

Cody & Mikal are coming.. Maybe Lyle around lunch-thirty. Everetts BDay today.. he will be there around 12 or so..

[@EuroB0B1]

Amazing, didnt really know they get can get that complex with all systems you got goin. Really enjoyed this build. Thanks.

[@chrisslky7018]

Awesome build! Considering one for my fleet. Thanks!

[@ShenRC]

😁👍Nice looks like you got her running!

[@ropewalkingelephant]

You had your driver literally on the edge of his seat moving that beer!

[@arcterus01]

Nice build. Being a seasoned fork lift driver, that sound doesn't sound right coming from that style of lift. It needs to be at least the less diesel sounding propane engine and electric horn instead of the air horn. Also needs the backup beeper. Just my opinion. Enjoy the fun that thing will bring to you guys. Can't wait to see the next loading wars.